FANMASTER MFP750 Master Pedestal or Wall Fan Instruction Manual

FANMASTER MFP750 Master Pedestal or Wall Fan

Product Information

industrial fan designed for circulating air in various environments
such as offices, lunchrooms, cafes, warehouses, and factories.
Specifications| | Air Flow (L/s)| Diameter (mm)| dBa| Motor (K/W)| Voltage/Hz| Plug Connection| Fan Speed| Height Adjustment| Oscillation
---|---|---|---|---|---|---|---|---
4800| 750| | | | | Warranty Extension Available| |

Product Usage Instructions

To ensure your safety and proper usage of the Fanmaster Pedestal or Wall Fan, please follow these instructions:

1. Read and understand all warnings and instructions provided in the instruction manual before using the fan.
2. Do not dispose of this product with general household waste. Follow the laws governing Waste Electrical and Electronic Equipment for proper disposal. Contact local authorities for information on available disposal facilities.
3. Place the fan in a suitable location where it can circulate air effectively.
4. Connect the fan to a power source with the appropriate voltage and frequency.
5. Adjust the height of the fan according to your preference.
6. If applicable, activate the oscillation feature to distribute air in a wider area.
7. Do not operate the fan in wet or damp conditions to prevent electrical hazards.
8. Regularly clean and maintain the fan to ensure optimal performance.

If you have any further questions or need assistance, please contact Fanmaster Pty Ltd at 1300 900 345 or email sales@fanmaster.com.au. You can also visit their website at  www.fanmaster.com.au.

FOR YOUR INFORMATION
Thank you for purchasing a Masterfan Pedestal or Wall Fan. Please read this instruction manual carefully before using this appliance.

Disclaimer:
Fanmaster reserves the right to make alterations to specifications, quantities, and dimensions, for production or other reasons, subsequent to publication. While we believe the information is accurate and complete, we make no warranty or representation for any particular purposes. The information is offered in good faith and with the understanding that any use of the units or accessories in breach of the directions and warnings in this document is at the sole discretion and risk of the user

Disposal Guidelines:
Do not dispose of this product with general household waste. This product must be disposed of according to the laws governing Waste Electrical and Electronic Equipment. If required, contact your local authorities for information regarding the available disposal facilities.

GENERAL SAFETY RULES & WARNINGS

• PLEASE READ INSTRUCTIONS CAREFULLY.
• PLACE INSTRUCTION MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. DO NOT ALLOW ANYONE WHO HAS NOT READ THESE INSTRUCTIONS TO ASSEMBLE, ADJUST OR OPERATE THIS APPLIANCE.
• IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION MAY RESULT IN CAUSING PROPERTY DAMAGE, SERIOUS INJURY OR LOSS OF LIFE.
• FAILURE TO COMPLY WITH THE PRECAUTIONS AND INSTRUCTIONS PROVIDED WITH THIS APPLIANCE, CAN RESULT IN DEATH, SERIOUS INJURY AND PROPERTY LOSS OR DAMAGE FROM HAZARDS OF FIRE, EXPLOSION, BURN, AND/OR ELECTRICAL SHOCK.
• ONLY PERSONS WHO CAN UNDERSTAND AND FOLLOW THE INSTRUCTIONS SHOULD USE OR SERVICE THIS APPLIANCE. IF YOU NEED ASSISTANCE OR REQUIRE INFORMATION SUCH AS AN INSTRUCTION MANUAL, LABELS, ETC. CONTACT FANMASTER.
• DO NOT STORE OR USE GASOLINE, PETROL OR ANY OTHER FLAMMABLE OR COMBUSTIBLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS APPLIANCE.
• FIRE, BURN, INHALATION, AND EXPLOSION HAZARD. KEEP SOLID COMBUSTIBLES, SUCH
  • AS BUILDING MATERIALS, PAPER OR CARDBOARD, A SAFE DISTANCE AWAY FROM THE APPLIANCE. NEVER USE THE APPLIANCE IN SPACES WHICH DO OR MAY CONTAIN VOLATILE OR AIRBORNE COMBUSTIBLES, OR PRODUCTS SUCH AS GASOLINE, SOLVENTS, PAINT THINNER, DUST PARTICLES OR UNKNOWN CHEMICALS.
• THE ELECTRICAL SYSTEM TO WHICH THE APPLIANCE IS CONNECTED MUST COMPLY WITH LOCAL REGULATIONS. A RESIDUAL-CURRENT DEVICE (RCD) MUST BE INSTALLED.
• UNPLUG THE APPLIANCE BEFORE PERFORMING ANY MAINTENANCE OPERATIONS.
• ALWAYS CHECK THE POWER CABLE BEFORE USING THE APPLIANCE. IT MUST NOT BE BENT, TAUT, STRETCHED, CRUSHED OR ANY WAY DAMAGED.
• IF THE POWER CORD AND/OR PLUG IS DAMAGED, IT MUST BE REPLACED BY FANMASTER, A SERVICE AGENT OR A QUALIFIED PERSONS.
• DO NOT COVER THE FAN GUARD OR MOTOR.
• DO NOT LEAVE THE APPLIANCE UNATTENDED WHEN IN USE.
• NEVER USE THE APPLIANCE WHEN EITHER THE APPLIANCE OR THE POWER CABLE IS WET.
• CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE.
• HE APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LOCK OF EXPERIENCE & KNOWLEDGE.
• DO NOT PUT OBJECTS INTO THE FAN GUARD & BLADE.
• DO NOT CLIMB OR STACK THINGS ON THE APPLIANCE.

PRODUCT DESCRIPTION & SPECIFICATIONS

PRODUCT DESCRIPTION
The Masterfan are a high quality industrial pedestal and wall fan. It is excellent for circulating air in a wide variety of applications such as offices, lunchrooms, cafes, warehouse and factories.

SPECIFICATIONS

ASSEMBLING & OPERATING INSTRUCTIONS

Remove the appliance from the carton. If the appliance is damaged, please contact Fanmaster or where you purchased the appliance from.

Operating Instructions

1. Place the fan on an even surface (pedestal).
2. Wall Fan J bracket – this can be installed up or down, ensure the long lock bolt is always installed the top – refer to drawing.
3. Connect the plug to the relevant power source.
4. The fan is not suitable in environments that is too moist or corrosive.
5. The fan has 3 speeds which can be changed by rotating the speed control switch. The numbers 0, 1, 2 and 3: 0 = OFF, 1 = Slow, 2 = Medium, 3 = Fast speeds.
6. Oscillation Control: The oscillating function is show in the assembly drawing, it can be adjusted between 0°~90°. When the adjustment screw is moved towards the direct shaft, the fan will not oscillate. The further away the adjusting screw is to the direct shaft, the bigger the oscillating angle.

Environment of Use

1. The max relative humidity is 90% (when in 25°C).
2. Below 1000 metres altitude.

Maintenance

1. To ensure prolonged safe use ensure you have this unit inspected, cleaned & moving parts lubricated by a qualified person after every 1000 hours of use.
2. Regularly inspect the cord & plug & do not use if damaged. A license electrician is required to repair or replace the cord & plug.
3. Any other repairs or maintenance must be performed by a qualified person.
   SPEC| 750mm
   ---|---
    A|  820
   B ~ C| 1188~1588
   D| 710

WARRANTY

Any claim under this warranty must be made within 24 months of the date of purchase of the product. To make a claim under the warranty, take the product (with proof of purchase) to the store where you purchased the product or go to https://www.fanmaster.com.au/support.

This warranty is given by Fanmaster Pty Ltd

• ABN : 45 353 934 457 Unit 1/6-8 Yalgar Rd, KIRRAWEE NSW 2232
• P : 1300 900 345
• E : support@fanmaster.com.au

This warranty is provided in addition to other rights and remedies you have under law: Our goods come with guarantees which cannot be excluded under the Australian Consumer Law. You are entitled to replacement or refund for a major failure and to compensation for other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Exclusions : This warranty does not cover:

• Any defects caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification, loss of parts, tampering or attempted repair by a person not authorized by the
• Any product that has not been installed, operated or maintained to a satisfactory level.
• Any damage caused by improper power input or improper cable

WARRANTY VALIDATION

Register Your Product

Warranty Management
Validate your warranty, and receive notification 14 days prior to expiration.

Warranty Extension Available
Add an extended warranty to give you peace of mind.

Product Updates
Latest news and updates on Fanmaster products.

REGISTER
www.fanmaster.com.au/warranty-registration
Fanmaster Pty Ltd | 1/6-8 Yalgar Road, KIRRAWEE NSW 2232 1300 900 345 | sales@fanmaster.com.au | www.fanmaster.com.au
N11664
MADE IN CHINA

References

• Fanmaster: Industrial Cooling & Ventilation Solutions
• Warranty Registration - Fanmaster
• Support | Fanmaster

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>