Fanmaster IMF600 Axial Misting Fan Instruction Manual

Fanmaster IMF600 Axial Misting Fan

Product Information

The AXIAL MISTING FAN is a powerful fan designed to provide cooling and misting capabilities. It features a misting motor, pump, and water tank for misting functionality. The fan is equipped with an oscillation motor for wide- angle air distribution. It has a safety grill, misting plate, water outlet, and water gathering plate for efficient misting. The fan operates at a power of 800W and has a speed of 910rpm. It can produce an airflow of 160m3/min and air pressure of 90Pa. The oscillation angle is 90 degrees, and the misting volume can reach up to 10L/h. The fan also has a noise level of 70 dB.

Product Usage Instructions

1. Before assembly, ensure that the fan is not plugged in and carefully remove all packaging materials.

2. Check all components to make sure there are no shortages or damages during transportation.

3. Assembling Tank Cart:

   • Refer to diagram 1. Loosen two M8 bolts and remove the oscillation device.
   • Refer to diagram 2. Assemble the left supporter and
     right supporter on the tank cart using M8 bolts.

4. Assembling Oscillating Device And Handle:

   • Refer to diagram 3. Assemble the oscillating device on the top of the left and right supporters and secure it with M16 bolts and M16 hand wheel.
   • Refer to diagram 4. Assemble the handle inside the left and right supports using the M6 screw.

5. Settling Water Tank:

   • Refer to diagram 5. Place the water tank on the tank cart.

6. Assembling Misting Fan And Electric Box:

   • Refer to diagram 6. Place the misting fan on the oscillation connect panel and secure it with an M8 bolt.
   • Refer to diagram 7. Fix the electrical box behind the horizontal plate using M6 screws.
   • Connect the two-core male and female connectors of the water pump and the four-core male and female connectors of the oscillating device.
   • Lock the nut and connect the upper blue water pipe to the lower end of the regulating ball valve.

Please refer to the provided structure diagram for a visual representation of the product components and their respective numbers.

Product Dimension

Structure Diagram

1. Safety grill
2. Misting plate
3. Water outlet
4. Water gathering plate
5. Supporter of water gathering plate
6. Misting motor
7. Front grill
8. Water collection plate
9. Drum
10. Motor supporter
11. Fan motor
12. Blade
13. Rear grill
14. Pushing Handle
15. Left fan supporter
16. Right fan supporter
17.  Electric box
18.  M16 Handwheel
19. horizontal plate
20. Extension pipe
21. Oscillation connect panel
22. Oscillation device
23. Water tank cover
24. Water tank
25. Front caster
26. Tank cart
27. Rear caster
28. Water pump

Assembly Instructions

Do not plug in the fan before assembly. Carefully remove all packaging materials, and make sure there is no residual foam left in any of the components. Carefully check all components, and make sure there is neither shortage nor damage during transportation.

1. Assembling Tank Cart Refer to the diagram Loosen two M8 bolts and take out the oscillation device. Refer to the diagram  Assemble the left supporter and right supporter on the tank cart with M8 bolts

2. Assembling Oscillating Device And Handle. Refer to diagram Assemble the oscillating device on the top of the left and right supports, and fix it with M16 bolts and an M16 hand wheel. Refer to the diagram Assemble
   the handle inside the left and right supports with the M6 screw.

3. Settling Water Tank Refer to diagram 5. Place the water tank on the tank cart.

4. Assembling Misting fan And Electric Box Refer to the diagram Place the misting fan on the oscillation connect panel and lock by M8 bolt. Refer to diagram

5. Fix the electrical box behind the horizontal plate with M6 screws. Connect the two-core male and female connectors of the water pump and the four-core male and female connectors of the oscillating device. Lock the nut, and connect the upper blue water pipe to the lower end of the regulating ball valve.

6. Misting Testing

   • Fill the water tank with appropriate clean water and lid the tank cover and lock casters.
   • Turn the misting ball valve from ON to OFF. Start the fan by pressing the fan switch and check if the fan motor and fan blade run normally.
   • Press the misting button to start the misting motor and water pump and check if the misting motor, misting plate, and water pump run normally.
   • Turn the misting ball valve from OFF to ON to check misting condition.
   • Press the oscillation button to check if the fan head oscillates smoothly.

Feature And Application

1. Utilize CAD-optimized design, good and graceful looking.
2. Centrifugal misting system means no nozzles and filter water, with reasonable structure and simple maintenance.
3. The fan surface is epoxy resin coated, anti-rust, and durable. The fan’s electrical components are designed to be waterproof. Safe to use, with tank cart, easy to move.
4. Air supplying, misting, and oscillating functions are driven by different motors. Motors adopt high-quality ball bearings, with the advantages of stable, low temperature-rise, long service life, low noise, and strong overloading ability.
5. The misting function is controlled by an independent switch, with a good misting effect and adjustable misting volume.
6. The fan is equipped with an independent control oscillation device. Convenient and reliable for use.
7. Designed for cooling, dedusting, and deodorizing in factories, residential areas, shopping malls, athletic fields, livestock farms, greenhouses, paper mills, tobacco factories and more.

Operating Instructions

1. Apply the fan complied to the voltage and frequency shown on the rating label. Do not use in a corrosive environment.
2. When a socket is used in the power supply, the socket should meet the IEC335-1 standard.
3. When the power liner is from the direct power supply, a polarity switch should be installed with a contact gap not less than 3mm on the fixation wiring.
4. Oscillating angle adjustment: Loosen hand wheels on the fan’s left side and right side.
5. Move it to the desired angle and tighten the hand wheels.
6. Make sure two casters are locked and the tank is filled with a certain amount of water before using the misting mode.
7. Filled with a certain amount of water, then connect the power supply of the fan and press the fan button to run the fan motor. Press the misting button to run the misting motor and water pump. By pressing the oscillating button, the fan will automatically oscillate.
8. Misting adjustment between “OFF” and “ON” when the fan runs with misting.
9. The fan can operate continually for 8 hours with the maximum misting volume when the fan runs with misting. Re-fill the tank to achieve the misting effect when it is short of water.
10. In the use of a water tank cart, DO NOT force to push the tank cart before opening the bake of the caster. Close the bake of the caster when stopping the tank cart. DO NOT stop the tank cart at the slope to prevent sliding forward.
11. Clean the tank each time before use. Take out the water pump before cleaning. Pour out the water after cleaning.
12. Press the misting button to cut off the power supply between misting motor and the water pump, and the fan can be used for blowing.

Wiring Diagram

remark: we don’t notify you if the above technology parameter change

Cautions

1. When opening the packing box, please take the machine head out as per the direction sign.
2. Don’t insert hands or any objects into the machine guards and misting plate.
3. The upward and downward angles of the machine must be adjusted within the stated angle range.
4. Don’t put the machine close to the curtain and other easily sucked-in objects
5. Don’t put the machine in uneven places.
6. Children, elders, and weak people can’t stand in front of the machine for a long time.
7. Type Y attachment – Damaged supply cords to be replaced by the manufacturer, service agent, or similarly qualified person to avoid hazards.
8. Please cut off the power and send the machine to a qualified technician for checking if the running machine emits unusual noise if smoke or machine blade can not run after the power supply.
9. Except for maintenance scope, an unprofessional person should not dissemble repair, or rebuild the machine.
10. Take away non-humidity-proof objects when starting the mist function in order to avoid causing rust or damage to the objects.
11. The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Maintenance

1. In order to keep the machine durable, you should clean the machine timely.
2. Please cut off the power before cleaning and remove the front guard and blade. Clean the machine with a soft cloth, ( please don’t use gasoline or other corrosive liquid ) please dry the guard and blade with a dry cloth, then install the machine. ( Attention: mist plate inside misting system can’t be dissembled ).
3. Please don’t let water flow into the motor and wet electric elements during cleaning, also don’t press/bend the blade and change the pitch angle of the blade.
4. In order to keep the water clean in a water tank, please wash the water tank, and water-receiving plate at a proper time.
5. To ensure the machine can oscillate smoothly, please add grease oil to the rotary part of the oscillating mechanism every 6 months.
6. Please clean the machine and seal the whole machine with a plastic bag before long time storage of the machine.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>