FANMASTER PACISD-PA Portable Evaporative Air Cooler Instruction Manual
- June 12, 2024
- Fanmaster
Table of Contents
FANMASTER PACISD-PA Portable Evaporative Air Cooler
Product Information
The Portable Evaporative Air Cooler – Single Directional is a cooling and ventilation device designed for personal use. It is a DIY assemble kit, model number PACISD-PA, manufactured by Fanmaster. The air cooler provides efficient cooling and ventilation in a single direction to create a comfortable environment.
The package includes the following parts:
| Part | Quantity |
|---|---|
| Air outlet assembly | 1 |
| 2 x side panels | 1 |
| 1 x top cover panel | 1 |
| 1 x underneath support | 1 |
| 1 x louvre assembly | 1 |
| Body | 1 |
| Castors (located inside body) | 4 |
| Screws/Accessories (located inside body) | – |
| Control Panel + Enclosure (located inside body) | 1 |
| Remote Control (located inside body) | 1 |
| Instruction Manual (located inside body) | 1 |
Product Usage Instructions
Tools Required:
- No additional tools are required for assembly.
Video Instruction:
You can watch the assembly instruction video by scanning the provided QR code.
Assembly Instructions:
Recommend 2 Persons for Assembly
- 1st Stage – Unpack & Locate Accessories Box: Carefully unpack the air cooler and locate the accessories box.
- 2nd Stage – Attachment of Castors: Attach the four castors to the bottom of the body.
- 3rd Stage – Assembly & Attachment of Air Outlet: Assemble the air outlet assembly and attach it to the top cover panel.
- 4th Stage – Cabling, Connection & Louvre Attachment: Connect the control panel and enclosure to the body. Attach the louvre assembly to the air outlet.
Once assembly is complete, refer to the instruction manual for operating the Portable Evaporative Air Cooler – Single Directional. Enjoy the cooling and ventilation provided by your new air cooler!
WHAT’S INCLUDED
TOOLS REQUIRED
- Powered drill with Philips head bit
- Screwdriver (philips)
- Pliers
VIDEO INSTRUCTION
PRODUCT INFORMATION
ASSEMBLY INSTRUCTIONS
RECOMMEND 2 PERSONS FOR ASSEMBLY
1st Stage – Unpack & Locate Accessories Box:
-
Remove body from the carton
-
Remove side panel (with yellow label) to access inside of body
-
Locate box with castors, instruction manual, control panel, remote & accessories
2nd Stage – Attachment of Castors
- Place down the carton or blanket on the floor
- Carefully lay the body on its side
- Attach 4 x castors with bolts & washers supplied
- Lock all 4 brake functions and lift unit into upright position
3rd Stage – Assembly & Attachment of Air Outlet
-
Locate 2 x side panels, 1 x underneath support & 1 x top cover
-
Assemble 2 x side panels, 1 x underneath support & 1 x top cover with screws provided
-
Attach air outlet to body with screws provided
4th Stage – Cabling, Connection & Louvre Attachment:
- Locate cables – controller cable (black) and earth cables (green/yellow)
- Thread the controller cable (black) through hole on the air outlet head
- Connect controller cable (black) to control panel
- Secure control panel with enclosure to head of unit with screws provided
- Attach earth cable (green/yellow) to synchronous motor on lourve assembly
- Connect synchronous motor cable to controller cable
- Attach the lourve assembly to the air outlet head
- Secure excess cabling of controller (black) and earth cables (green/yellow) on the front metal support pole in the body of unit with cable ties supplied.
- Replace side panel
- Ready to plug and play.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>