CAME BPT Indoor Receiver Door Entry System User Manual

: June 13, 2024
: CAME

Table of Contents

CAME BPT Indoor Receiver Door Entry System
Product Information
Function of buttons
Standard functions
Intercom
Call transfer
Setting melodies
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CAME BPT Indoor Receiver Door Entry System

Product Information

The Door Entry System Indoor Receiver (Model FB00855-EN) is a device that allows users to communicate with visitors at the entry panel and control access to their premises. It features various functions and buttons for adjusting volume, activating/deactivating communication, and releasing the door lock. The receiver also includes intercom capabilities, call transfer functionality, and support for auxiliary features.

Function of buttons

CAME-BPT-Indoor-Receiver-Door-Entry-System-1

Only use soft, dry or slightly damp cloths to clean the terminal; do not use any chemical products.

This product complies with the relevant directives in force.
Decommissioning and disposal. Dispose of the packaging and the device at the end of its life cycle responsibly, in compliance with the laws in force in the country where the product is used. The recyclable components are marked with a symbol and the material’s ID marker. THE DATA AND INFORMATION SHOWN IN THIS MANUAL ARE TO BE CONSIDERED AS SUBJECT TO CHANGE AT ANY TIME AND WITHOUT THE NEED FOR ANY ADVANCE WARNING. MEASUREMENTS, UNLESS OTHERWISE INDICATED, ARE IN MILLIMETRES.

Standard functions

CAME-BPT-Indoor-Receiver-Door-Entry-System-2

Intercom

Select the extension that you want to call; the line-free tone indicates that the call has been forwarded. 3 successive beeps indicate that it is not possible to make calls because the line is busy.
The receiver being called rings. Press the key on the receiver that is called to activate the communication. Internal receivers 1 and 2 are in communication.
During a conversation between extensions, a call from an entry panel is signaled to the receivers by a beep that is repeated every 5 seconds.

Call transfer

With active communication, select the extension you wish to transfer the call to; the line-free tone indicates that the call has been forwarded.
The receiver being called rings. Press the key on the receiver that is called to activate the communication. Internal receivers 1 and 2 are in communication, the entry panel is waiting.
Press the key on receiver 1 to end the communication with the entry panel and transfer the call to the receiver 2.
The receiver that receives the call can also transfer it.

Call from concierge notification
Function available only on systems with concierge’s desk.

An unanswered call from the concierge’s desk is marked by the Aux2 LED lighting up. The notification goes out when communication with the concierge begins.

Request for call to concierge
Function available only on systems with concierge’s desk.

Pressing the Aux2 button sends a request for call back to the concierge.

Setting melodies

All the programming stages described below must be carried out in sequence:

Going into Programming. Press the button 5 times in 5 secs 1. A short beep confirms that you have entered programming mode.
Programming the melody associated with a call from the entry panel.
- To listen to the melodies in sequence, press key 2.
- To select the melody and exit programming, press key 3.
- To select the melody and continue with programming, press key 4.
Programming the melody associated with a call from the front door.
- To listen to the melodies in sequence, press key 5.
- To select the melody and exit programming, press key 6.
- To select the melody and continue with programming, press key 7.
Programming the number of rings for the call. Press key 8 as many times as you want it to ring (from 1 to 6 rings). Three seconds after the last press of the key the call selected for the chosen number of rings will be played back. To exit programming, press key 9.