AKO-58500 Coldroom Activity and Maintenance Module User Guide

AKO-58500 Coldroom Activity and Maintenance Module

AKO-58500

CAMM Module
Coldroom Activity & Maintenance

AKO ELECTROMECÁNICA , S.A.L.
Avda. Roquetes, 30-38
08812 • Sant Pere de Ribes.
Barcelona • Spain.
www.ako.com

We reserve the right to supply materials that might vary slightly to those described in
our Technical Sheets. Updated information is available on our website.

Functionality

The CAMM module provides compatible devices of the AKOGAS and AKOCORE range with dozens of functions in combination with the applications
(app) for AKO CAMM Tool / AKO CAMM Fit mobile devices:

Data logging: Periodically saves analogue values of the different
sensors (temperature, moisture, gas concentration and other
variables).

Logging of configuration changes: Saves in memory any change
made to the configuration of both the device and the CAMM module
itself.

Logging of events and alarms: Saves in the memory changes of
status that occur in the device (alarms, door opening, activation of the
light, etc.)

Activity log: Saves operating and usage statistics of the device and
calculates trends.

Remote configuration: Allows varying the configuration of the device
using the app.

Description

Reset button

Pressing once briefly (< 1 second) activates Bluetooth communication
and displays the battery status.
Pressing for more than 3 seconds restarts the module. The three LEDs
flash quickly to confirm the action.
If Bluetooth communication is active, it disconnects it.

Unsaved activity logs are lost.

Clock functions in real time: Provides the device it is installed in with
clock functions in real time (program defrosts or Set Point changes).

Remote control of functions: Allows controlling the different
functions of each remote device using the app.
Configuration of devices before their installation: Allows
configuring the parameters of a compatible device before its installation
using an app.

Remote assistance: Allows giving control of a device with CAMM
module to another person located far from the installation. Two mobiles
are needed with the app, one must be connected to the device via
Bluetooth and both must have an Internet connection.
The type of data saved in the different logging functions depends on the
device they are installed in.

Blue LED
Indicates Bluetooth communication status:
Switched off: Communication inactive.
Flashing: Communication active and waiting for link.
Constant: The module is linked to the app.

Green LED
Indicates battery status:
Constant: Battery level above 80%
Quick flashing: Battery level between 30% and 80%
Slow flashing: Battery level below 30%
Switched off: Low battery

Red LED
Indicates an operating error of the module
Flashing: Indicates an operating error in the logging function, the
module is not logging. This may be due to two reasons:
Error in the date/time configuration: The date/time
configuration must be carried out using the app or via AKONet.
Data saved in another device: The module cannot store data
logged from two different devices simultaneously. To use the
logging functions, make sure that the module does not contain
logged data of another device. The app should be used to
download and delete data.

Constant: Indicates a general operating error, the firmware must be
upgraded.

Installation

Disconnect the power supply before doing anything
inside the device.
Installation in alarm stations and controllers.

Pressing for over 10 seconds returns to factory settings thereby deleting
all configuration data. The three LEDs turn on one by one during the
process. At the end, they flash quickly and the module reboots.
The date and time are maintained.
Use the key included to activate the reset button.

Operating modes

The CAMM AKO-58500 module has 2 possible operating modes:
Independent operation *
The module is not installed in any device.

Functions:

• Download data
• Change configuration of the module
• Update the firmware

To link it to the app, activate communication by pressing the reset button and start the
linking process with the app.

If the link is not completed, communication deactivates after 1 minute.

Connected to a device

Device without power supply *
The module is installed in a device, but the latter does not have power supply (device not
installed).

Functions:

• Download data
• Change configuration of the module
• Change configuration of the device
• Update the firmware
• HACCP logging**

When the module is inserted in the device, communication activates automatically. If the
module has already been inserted, activate communication by pressing the reset button and
start the linking process with the app.

If the link is not completed, communication deactivates after 1 minute.

Device with external power supply

The module is installed in a device operating with external power supply.

Functions:

• Download data
• Change configuration of the module
• Change configuration of the device
• Remote control of functions
• Update the firmware
• Extending the device’s functions:

Data loggin
Logging of configuration changes
Logging of events and alarm

Activity log
HACCP logging*
Clock functions in real time
Communication is active while there is external power supply, start the linking process with
the app at any time.

If the device is powered using its internal battery (fault in the power supply)
communication is disabled.

• If communication between the app and the module remains inactive for over 5 minutes,
  communication is interrupted and the linking process will have to be started again.
  ** Only in devices with HACCP function.

Link with the AKO CAMM Tool / AKO CAMM Fit application

The use of both applications requires logging in with a valid email.
After 1 minute without activity between the application and the CAMM module, communication is disconnected, to re-establish it, return to screen “Device list” and press the REF
button.

1. Open app AKO CAMM Tool / AKO CAMM Fit in your
mobile and enter the access data.

2. The app makes a device search and displays the results
on screen.

Choose the device you want, in a few seconds the app
requests the Bluetooth link code (by default 123456).

3. After a few seconds, the app displays the screen of the
device chosen, communication has been established
correctly.

Some Android devices, during the linking process, may tell the user to access settings / Bluetooth and link from there,
looking for the device via its serial number.

Battery

The CAMM module uses its internal battery in the following cases:
-On activating communication of the module if it is not connected to any device, or if it is
connected to a device without external power supply.
-When communication is not active, the battery is used for maintaining the date / time
and unsaved operating and usage statistics.
With the battery charged 100%, the battery life is 4 months with inactive communication
and 4 hours in constant communication with the app.
The battery automatically charges when the module is installed in a device with external
power supply.

Declaration of Conformity

AKO Electromecánica S.A.L. hereby declares that the type of radioelectric device AKO-58500
(CAMM Module) is in accordance with Directive 2014/53/EU.
The full text of the EU conformity declaration is available at the following Internet address:

http://help.ako.com/assets/uploads/3669.pdf

Technical specifications

External power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Vdc
Internal power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery Li-Ion 3.7 V 100 mAh
Maximum consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Battery range: On stand-by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 months
In communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 hours
Working ambient temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -30 ºC to 50 ºC
Storage ambient temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20 ºC to 60 ºC
Range of moisture permitted . . . . . . . . . . . . . . . . . . . 0 – 95 % HR (Without condensation)
Bluetooth frequency bands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400 Mhz a 2483.5 Mhz
Maximum Bluetooth RF power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 10 dBm
Dimensions (without support) . . . . . . . . . . . . . . . 46 mm (W) x 36.5 mm (H) x 12.2 mm (D)
Compatible with the apps: . . . . . . . . . . . . . . . . . . . . . . AKO CAMM Tool / AKO CAMM Fit

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>