JBL CA-9QG 100V Manual-Feed Soldering Station User Manual
- June 12, 2024
- JBL
Table of Contents
JBL CA-9QG 100V Manual-Feed Soldering Station
Product Information
| Product Name | Manual-Feed Soldering Station |
|---|---|
| Model Numbers | Ref.: CA-9QG 100V, CA-1QG 120V, CA-2QG 230V |
| Control Unit Model Number | CC1001 |
| Spare Parts for Control Unit | – Circuit: 0025013 |
– Enclosure: 0023639
– Tool Holder: 0014706
– Splashguard: 0028379
– Antisplash Membrane: CL7882
Fuses| Ref.: CA-9QG 100V FUSE T-2A
Ref.: CA-1QG 120V FUSE T-2A
Ref.: CA-2QG 230V FUSE T-1A
EARTHING FUSE F 1.25A
Other Spare Parts| SN5450
0002801
CL7984 S0354
0016351
0010433 0025013
CL6210
AP250-B
0031444 PLR195
Product Usage Instructions
- Connect the control unit (CC1001) to a power source according to the appropriate voltage (100V, 120V, or 230V).
- Ensure that the fuses are installed correctly and have the specified ampere rating. Use Ref. numbers mentioned in the product information section to identify the correct fuses.
- Attach the circuit, enclosure, tool holder, splashguard, and antisplash membrane to the control unit as needed. Refer to their respective Ref. numbers for identification.
- For any other spare parts mentioned, follow the manufacturer’s instructions for installation if required.
SPARE PARTS
CONTROL UNIT
- CIRCUIT; 0025013
- ENCLOSURE: 0023639
- TOOL HOLDER: 0014706
- SPLASHGUARD: 0028379
- ANTISPLASH MEMBRANE: CL7882
- Ref.: CA-9QG 100V FUSE T-2A
- Ref.: CA-1QG 120V FUSE T-2A
- Ref.: CA-2QG 230V FUSE T-1A
- EARTHING FUSE F 1.25A
- Ref.: CA-9QG 100V
- CA-1QG 120V
- CA-2QG 230V
Read User Manual Online (PDF format)
Loading......