K-Rain 2510 RainSwitch Ready Controller Instruction Manual
- June 13, 2024
- K-RAIN
Table of Contents
INSTALLATION INSTRUCTIONS
MODELS 2510, 2514 AND 2520
RA1NSWITCH READY CONTROLLERS
FEATURES
- Prewired for easy connection of “Rainswitch”.
- Allows for manual override of Rainswitch From controller face.
- Can be used with most brands of normally closed RainaWitclns.*
WIRE CONNECTION DIAGRAMS
(Caution: always disconnect power at source prior to installing or servicing
this unit.)
- Remove lower cover and connect input (LINE) and output (LOAD) wires to proper terminals as shown above.
- Drill suitable hole in bottom of controller and connect rainswitch leads to yellow leads using wire nuts provided and follow Rainswitch manufacturers mounting directions.
- N o te: If no rainswitch is used, switch must be in “OVERRIDE” position for controller to Function.
- Reinstall lower cover.
- See 1000/2000 booklet for programming and operating instructions.
*May be used with Mini Clik II, Toro Rainswitch model 850-74, or other normally closed Rainswitch devices.
K-Rain Manufacturing Corp. 1640 Australian Avenue Riviera Beach,
FL 33404 LISA 1.561.844.1002
www.krain.com
Read User Manual Online (PDF format)
Loading......