MS3 SUNWAYI FHD 1080P 3.0 170° Wifi Car Dash Camera User Manual

MS3 SUNWAYI FHD 1080P 3.0 170° Wifi Car Dash Camera

MS3 PROFILE & BUTTON DEFINITION

LDWS CALIBRATION

• Install and fix MS3 OVR on front windshield, the camera angle should be adjusted for optlmal position. Then calibrate LOWS (Lane Deviate Warning System),
• The rad long line abava should aim at Iha level road’s position whara the road disappear from view. The graen Una below should be align ad with the front adge of the car.
• Find the LOWS calibration settings in the menu (Diagram1) , press UP/DOWN Key to adjust the red long line position, press OK key to conflnn. Then press UP/DOWN key again to adjust lhe green short line and press OK to confinn.
• Finally praaa UP/OOWM to adjust the height of the graan vertical line, press OK for confirmation.

ADAS FUNCTION OVERVIEW

ADAS
(Advanced Drlver Assistance Systam), Includes LOWS and FCWS.

• LDWS (Lane Deviate Werning System)
• If activating 1he funelion in setting menu, when the running
• Csr Oevlafe lane, warning line wm flash on the screen, meanwhile the human voice warning will start.
• FCWS (Front Colli•ion Warning System)
• If actlvaUng the funellon In setting menu, when Iha running car get cloae(S0-5meters) to the front car, warning will work:
• A. 50-10 mater, only warning display.
• B. 10-5 meters, not only display warning, but also human voice warning.

INSTALLATION INSTRUCTION

1. power off car engine;
2. lnBBrt the rlghl TF card In the card slot;
3. Install and fix DVR on the front windshield;
4. Insert the adapter with charging cable In the car cigarette lighter hole;
5. insert the usb end afthe charging cable in the OVR usb port. Then route and hide the cable;
6. Install the rearvlaw camera (If have), Insert the DC terminal in dvr AV IN hole, route and hide the cab I;
7. swivel camera lens for opUmal position;
8. start car anpine, fonnat TF card, than check if DVR installation os correct.

If correct, duh cam (DVR) Indicator llght will work, and will enter 1’9cordlng automatically, recording Indicator light WIii start,

MS3 FUNCTION INSTRUCTION

Automatic Record Function
Start car engine, dvr will start and record automatically. The charging light will work, and the recording icon will flash on the screen. When power off car engine, DVR will save the video file in TF card and power off automatically following the car power off.

NOTICE: Have to choose the loop record time (1′ 3′ 5′), please prefer 1′ or 3′ , mustn’t choose OFF;

Manual Record Function

In standby mode and formatting TF card inside, short press (0.5s) [OK] key to enter recording. The charging light will work, and the recording icon wil flash on the screen. While recording, short press [OK] key to stop.

Taking Photo
In standby or recording mode, short press [DOWN] key for 0.5s to take photo.

Gravity Sensor
Built-in G-sensor can be activated and lock the key video (from 10 seconds before accident to 3 munites after the accident) if collision happens.

One-click lock function
The machine has One-click lock function, ii can lock the reserved files that need to be retained without being recycled. In recording mode, short press(0.5 Seconds) [menu], the recorder will lock the image in the first 10 seconds and then 1/3/5 minutes.

Date/Time Setting
Press [MENU] key to enter Date/ Time setting, short press [UP]/ [DOWN] to setup the right data, press [OK] key to confirm and move the light bar to the next item. NOTICE: In order to get effectively recording date and time for prove, please set the correct time before using the machine.

Playback Files
Long press(3 seconds) [MENU] to switch to plar,back mode on the boot state. Short press(0.5 Seconds) “Up”/ Down”can find the files. Short press(0.5 Seconds) “OK’ button to play. If you need to exit the playback mode, long press (3 Seconds) “MENU” again.

Rearview System Function while Reversing
If connecting the rearview camera and the red trigger wire of the cable is connected to the reversing light cable, the rearview parking function will be activated and the whole screen will display the rear image when you reverse car. It will return to automatic record mode after reversin

ADAS
(Advanced Driver Assistance System), includes LDWS and FCWS.

Parking Monitoring
Under parking monitoring function, in shutdown status, if there is a slight vibration, the video recorder will switch on automatically. It will record for 20 seconds and then shut down if it’s in the flame out state(time can be set up in the setting menu)

Motion Detection
When machine turns on but In standby mode, if Motion detection is on, and the lens senses a moving object, the machine enters the recording mode. When the camera does not sense the moving object for 5 seconds, the system stops recording. If you need to exit the Motion detection mode, set “off” in the [Menu].

Languages
English/traditional Chinese/simplified Chinese/Japanese /French/German/Italian/Portuguese/Russian/Spanish/Thai.

SPECIFICATION & PARAMETERS

• Video Resolution: FHD1080P, HD1296, 720P
• Storage compression: H.264
• Video Format: MOV
• Picture Format: JPG
• Frequency: DUAL600MHZ 32-bil RISC
• RAM: 8MB
• LCD Size: 3.0 inches
• LCD Resolution: 640*480
• G-SENSOR: 380B
• Working Power: 4W
• SD Card (TF): 4GB, 8GB, 18GB, 32GB, … ,258GB(max)
• Voltage: DC5V
• Work Temperature: -4″F-149″F(-20’C-65″C)
• Storage Temperature: -13″F-167″F(-25’C-75″C)
• Air Pressu: 960Mber-1040Mber
• DVRVideo: 1080P 30FPS, HD video, no skip frame, no leak seconds, Good nightvision, realtime preservation of driving images.
• Reervlew Periclng: Rearview paricing function when Reversing if having rearview camera.

FAQ

If troubleshooting occurs under normal operation, please refer to the following solutions.

Can’t record or take photos
Solution: Please check whether the TF card has enough space, whether ii is locked or not, or the card may be broken.

Automatically stops when recording
Solutions: Because HD video file is big, please use the high-speed TF card compatible with SDHC, Please use C10 or above high-speed TF card.

“File error” prompts when replay images and video
Solutions: Error occurred while TF card stored data, resulting in incomplete file. Please use the “format” function of the camera to reformat the TF card.

The image was foggy
Solutions: Please check whether the lens has dirt or finger print. Before shooting, wipe the lens with lens paper.

The image is very dark when shooting the sky, water or other scenes .
Solutions: In the large contrast scenario, the automatic exposure feature of the camera can be affected, which can be modified by adjusting the “EV” value in the machine Settings menu.

In cloudy day or indoor light, color performance is not perfect
Solutions: Please check the machine if the “white balance” function has set to automatic.

Horizontal stripe interference in the image
Solutions: This is due to the setting of the wrong “light source frequency”, depending on the local power supply frequency, set to “50Hz” or “60Hz”.

Crash machine
Solutions: Please press reset button to restart the machine.

WARRANTY

Warranty is 1 year counting from buying date (not include periodical consumable part). if the product failure under normal operation, We will provide free replacement or repair during the period of warranty. We reserve the right to change new products or other equivalent products. We will not be responsible for the damage(such as traffic accident) which doesn’t cause from our products themselves.

Exception to warranty

1. Don’t follow user manual to operate product.
2. Product damaged because of accident, neglect, abuse, misuse.
3. Repair without authorization.
4. Damaged due to transportation.
5. Other damage not because of design, technical, manufacturing and quality problem.

All defective products should be sent to us or our authorized repair center, attached with detail description of defect and show original purchase invoice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>