Simx PUB1280 Side Draft Hand Dryer Instruction Manual
- June 13, 2024
- Simx
Table of Contents
PUB1280 Side Draft Hand Dryer
Instruction Manual
INSTALLATION INSTRUCTIONS
Side Draft Hand Dryer FAN5655
TECHNICAL SPECIFICATIONS
Supply: 220 – 240V AC
Total Power: 1650 W
Air Speed: 95 m/s
Dry Time: 10-15 sec
Housing: Stainless Steel 304
Auto Shut Off: 30 sec
Sound Level: 36 db(A)
Safety: Class I
IP Rating: IPX4
IK Rating: IK08
Dimensions (A x B x C): 300 x 730 x 222 mm
Net Weight: 11.2 kg
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION
IMPORTANT
This product is suitable for use only with a supply voltage of 230-240V AC,
5014z.
All electrical work must be carried out in accordance with bcal and national
electrical codes as applicable.
We strongly end that this device is installed by a registered electrician.
Always switch power off prior to installation. A means of mains power
isolation must be installed in the circuit for the purpose of safe access for
any internal cleaning, recalibraticn. or maintenance.
This device is not intended for use by Persona (inducting children) with
reduced phySiCal, Sensory or mental capabilities, or lack of experience and
knowledge. unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Young children Should be supervised to ensure that they do not play with the
appliance.
Any changes or modifications made or attempted to this product, without the
prior written approval of the manufacturer, will void any and all stated
warranties.
INSTALLATION
Note: This unit must be fixed to a solid supporting wall and must not be
mounted above shelves or over stainless steel/reflective surface counters.
To ensure the ease of installation and subsequent maintenance of this unit the
horizontal distance to any adjacent wall should not be less than 200mm.
- Unlock power switch cover and confirm power switch is in the off position (Figure A).
- Attach mounting bracket (Figure B).
- Remove electrical access panel and wire as per diagram (Figure C).
- Mount hand dryer on bracket (Figure D).
- Remove bottom air filter to access mounting hole on base of unit. Replace air filter (Figure E).
- Plug unit into approved power point if equipped with plug.
- Turn power switch on, return switch cover and lock into place. Check hand dryer operations.
MAINTENANCE
Periodic cleaning of this unit is required to maintain optimum performance and
reduce unnecessary wear on parts.
Depending on usage, a regular maintenance programme with a frequency between
3-6 months is highly recommended.
Detach the cover from the dryer and remove any dust or lint. Remove and
discard the existing filter (the HEPA filter cannot be cleaned and reused).
Replace with a new HEPA filter and reassemble after cleaning.
Wipe the cover with a damp cloth and mild cleaning solution. Do not soak.
Never use abrasives to clean the cover.
“Replacement NEPA filter (replace every 6-12 months based on usage)……………..
FAN7429
WARRANTY
This product is guaranteed by Simx Ltd for 3 years from the date of purchase
against faulty materials or workmanship which affects its design ability to
switch and operate. During this period if the product has a defect of this
nature it will be repaired or replaced free of charge by Simx with the same
item, or a similar one of higher specifications, ON THE CONDITIONS THAT:
The buyer returns it to the seller from whom it was bought, freight paid.
The product has been bought by the user, i.e. a receipt/sales invoice is
produced as a proof of purchase.
The product has not been misused or handled carelessly, installed in anyway
contrary to the installation instruction, or installed in any unusually
exposed or harsh environmental conditions.
This guarantee excludes liability for any discolouration or delamination of
paint or plastic, or any user replacement parts. It does not confer any rights
other than those expressly set out above and does not cover any claims for
consequential loss or damage.
Our Goods come with guarantees that cannot be excluded under the Australian
and New Zealand Consumer Law. You are entitled to a replacement or refund for
a major failure and for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the Goods repaired or replaced if the
Goods fail to be of acceptable quality and the failure does not amount to a
major failure.
Specifications are subject to change without notice.
Distributed by Simx (NZ) and Ventair (AUS)
PO Box 14 347, Panmure, Auckland, NZ.
Technical Support (09) 259 1662
e: sales@simx.co.nz
www.simx.co.nz
www.ventair.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>