PARADOX TM70 Intuitive Touchscreen Instruction Manual
- June 12, 2024
- Paradox
Table of Contents
TM70 (7”) / TM50 (5”) Touchscreen Keypads
Installation Manual
Installation
-
Separate the top assembly from the back plate. Insert a flathead screwdriver into the tab located, as shown in Figure 1.
-
Mount the back plate to the wall or to a gang box using appropriate screws. Ensure that the UP arrow on the back plate is in the up position.
Note: We recommend to feed the TM70 with 18 gauge wire.
-
Make sure the SD card is installed properly and locked with text facing backward to wall/connections facing to the front, as shown in Figure 2.
-
Secure the wire plug to the PCB socket the wires as per the color code to match the Paradox keypad bus code. The blue wire is keypad zone input.
Note: We recommend to feed the TM70 with 18 gauge wire. -
Attach the SD card cover if needed, then attach top to back top hooks first then lock the bottom as per Figure 1. The SD card can be removed if necessary with a flat screw from the top if the metal cover is not attached or by opening the keypad for loading pictures.
-
Power up the bus and verify that the voltage is higher than 11.5V (displayed at the bottom right of the main screen as well as the boot sequence screen).
Technical Specifications
| TM70| TM50
---|---|---
Power Input| 9 to 15 VDC
Consumption| 250mA at max brightness
+ 80mA sounder| 150mA at max brightness
+ 80mA sounder
Wire Connection| 18 Gauge| 18 Gauge recommended,
22 Gauge
Display| 7″ 800 x 480| 5″ 480 x 272
Dimensions| 17.7 x 11.4 x 1.5 cm (7 x 4.5 x 0.6 in.)| 14.2 x 9.5 x 1.4 cm (5.6
x 3.75 x 0.56 in.)
Humidity| 5-90%
Indoor Temp.| Yes
SD Card| 4GB; 2GB free
Input| Zone
Tamper| Built-in, Cover and Wall
Compatibility| Swan, EVO, Spectra
Remote Upgrade| Swan only
Jpeg Download| Swan via Bus, EVO/Spectra SD Card
Auto Dim| Yes
Chime| Yes
Warranty
For complete warranty information on this product, please refer to www.paradox.com/terms. Specifications may change without prior notice.
PARADOX.COM
TM7050-EI00 | 02/2017