zippo Flex Neck XL Utility Lighter Instruction Manual
- June 12, 2024
- ZIPPO
Table of Contents
zippo Flex Neck XL Utility Lighter Instruction Manual
DANGER: EXTREMELY FLAMMABLE. CONTENTS UNDER PRESSURE. KEEP OUT OF THE REACH OF CHILDREN. Do not puncture or incinerate container. Do not expose to heat or store at temperature above 120°F (49°C). Do not use near sparks or open flame. Do not store in direct sunlight
WARNING: KEEP LIGHTERS AND THEIR FUELS OUT OF REACH OF CHILDREN. Ignite
utility lighter away from face and clothing. Do not use to light cigarettes,
cigars or pipes. Be sure flame is out after use. Never expose to heat above
50°C (122°F) or to prolonged sunlight. Never puncture or put in fire. Follow
all instructions and warnings provided by manufacturer of appliance or any
other item when using this product. Do not keep lit for more than 30 seconds.
Wait 2 minutes after refilling before using the utility lighter. When filled,
will contain flammable gas.
Do not refuel over containers such as sinks or near a flame. Butane tends to
settle and collect in the lowest point
Initial Fill Instructions
WARNING: This lighter does not contain butane- be sure to carefully fill lighter according to these instructions.
-
Set flame adjustment to minimum position.
-
Fill with Zippo Butane or other high quality butane gas. Please ensure proper mating between the refill container and fuel reservoir of the lighter during refilling to avoid leakage of fuel. Do not use lighter for a minimum of 4 hours.
This is to let the butane and internal parts stabilize before use. Igniting the lighter prematurely could cause an excessive and dangerous flame height. -
When igniting lighter for the first time, be sure that the flame adjustment is set to the minimum position. Use with caution and aim safely away from person and combustible materials.
-
After the flame is stabilized, adjust to preferred flame height setting.
Zippo Butane Fuel is recommended for your Zippo Flex Neck Utility Lighter XL and other refillable butane products.
INSTRUCTIONS
Our classic design features a patented child resistant safety lock button (A), which releases and allows the ignition switch (B) to engage
To operate:
- Depress and hold safety lock button (A).
- Slide ignition switch (B) forward to ignite and hold to maintain flame.
- Release the ignition switch to extinguish flame and stop fuel flow.
To adjust flame:
Turn regulator (C) to + (higher) or to – (lower).
Do not refill near flame, heat source or sparks. Use only in well ventilated area.
To refill with butane fuel
- Use only a high-quality grade butane fuel to refill. Use of other than Zippo Butane Fuel may result in damage to the filling valve and could cause clogging.
- Always refill Product in the position shown. Place Butane fuel nozzle into filling valve (D) and depress several times with firm, even pressure. For safe filling: ensure proper mating between fuel can and Refill Valve. Hold for several seconds. Repeat if necessary.
- Wait at least two minutes after refueling before using. Zippo Butane Fuel is recommended for this Product and other refillable butane products.
