ZIPPO Z8B22 Bit Safe Lighter Insert User Manual
- June 12, 2024
- ZIPPO
Table of Contents
ZIPPO Z8B22 Bit Safe Lighter Insert
Thank you for purchasing the ZIPPO’ BIT SAFE LIGHTER INSERT (“Product”). READ
ALL WARNINGS AND INSTRUCTIONS before using your Product for the first time.
Improper use ol this Product may result in Product damage. lor which damages
you (“Purchaser”) and not Zippo Manufacturing Company (“Zippo”) are
responsible.
If you have any problems with the operation of your Product. DO NOT return ii
lo the retail store. Instead. consumers in the U.S. should contact Zippo
Consumer Relatons at 888-442-1932 or
visit zippo.com
WARNING: Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in Product damage and/or serioos injury.
Extra care should be taken to prevent burn. injury. or fire. Save these
instructions for future reference.
GENERAL SAFETY WARNINGS AND INSTRUCTIONS
- Keep inserts out ol reach of children.
- When using the bits to loosen or tighten fasteners. it is recommended to use the insert ootside of the case.
- This insert is only designed to work with regular-sized geooine Zippo Windproof Lighter models including; Regular. Vintage, Armor4, and 1941 Replica.
- DOES NOT work with Slim or 1935 Replica model.
- D0 NOT attempt to disassemble the Product for cleaning or modify it in any manner. This will void the warranty.
- Always grasp lighter case edge(s) with linger(s) and thumb when inserting or removing insert. Gripping lace of lighter may cause difficulty.
- follow all instrucfons and warnings provided by manufacturer of any other item when using this product.
DISCLAIMER: ZIPPO WILL NOT BE RESPONSIBLE OR LIABLE FOR ANY DAMAGES YOU OR ANY THIRD PARTY MAY SUFFER AS A RESULT OF USE OR MISUSE OF THIS PRODUCT.
The Bit Sale Lighter Insert turns your Zippo lighter into a functional screwdriver, adding compact utility to your everyday carry. Pop the 4-in-1 insert into your classic Zippo windproof lighter case* and quickly and easily swap between the durable Phillips. flathead and screwdriver bits lor jobs on the go.
- Rugged, construction and durable bits
- Magnetic hex-shaped bit holder
- Includes #1 Phillips, #2 Phillips, #2 Flat and T20 heads
- Secure sell-storage lor bits not in use
- Famoos Zippo ‘click”
OVERVIEW
- Magnetic bit holder
- Cam
- Phillips #1
- Phillips #2
- T20
- ¼ Slotted bit
OPERATING INSTRUCTIONS
Install the Insert into your Zippo Lighter Case
- Carefully remove insert lrom package.
- Open lighter lid and remove lighter inserl
- Firmly grasp lighter case edge(s) with linger(s) and thumb. then slide new bit sale insert into lighter case.
- Be sure to flip insert cam down before inserting into lighter case.
ONE YEAR LIMITED WARRANTY
Zippo Manufacturing Company warrants the Product against manufacturing defects in material and workmanship under normal use. This warranty does not cover, and Zippo shall have no liability with respect to, damage, failure or loss caused by or attributable to abuse, accident, misuse, improper or abnormal use, neglect, improper or unauthorized repair, failure to follow instructions provided by Zippo or acts of God” or other contingencies beyond the control of Zippo. This warranty does not cover the incidental or consequential damages, although some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Warranty coverage extends to the original purchase and begins on the date of purchase and ends one (1) year thereafter. Other than as to the foregoing, this warranty is in lieu of all other express and implied warranties. Any implied warranties which by law cannot be excluded are limited to this same period. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain proper instructions for service under this limited warranty, refer to repair instructions at zippocom or contact Zippo Consumer Relations at consumerrelations@zippo.com or 1-888-442-1932. Do not return the Product to the retail store. If the Product is covered by the warranty, Zippo will repair or replace the item or will refund the purchase price. Any attempt to disassemble the Product by user or any non-approved repair center will void this warranty.
NOTE: Proof of purchase is required for warranty service.
ZIPPO MANUFACTURING COMPANY 33 Barbour Street I Bradford, PA 16701 U.S.A.
Zippo Manufacturing Company is not associated with the Phillips or Torx trademarks
ZIPPO MANUFACTURING COMPANY
33 Barbour Street Bradford. PA 16701 U.S.A.
zippo.com