zippo 09b Rechargeable Hand Warmer Instructions

zippo 09b Rechargeable Hand Warmer

ZIPPO MANUFACTURING COMPANY Bradford, Pennsylvania 16701 USA

Caution!
READ ALL USE INSTRUCTIONS CAREFULLY BEFORE USING. FOLLOW FUEL FILLING ANO IGNITION INSTRUCTIONS CAREFULLY. 00 NOT OVERFILL!

• HANO WARMER MUST BE FILLED WITH FUEL TO USE. Use Zippo Lighter Fuel only. This is a refillable device. It is intended for multiple uses and instructions must be carefully followed to ensure safe use.
• After ignition, no flame will be visible. However, the Hand Warmer gets very hot during use. To avoid burning yourself and others, always keep it in the supplied protective fabric bag. If it is still too hot, wrap it in an additional piece of cloth. If removed from supplied protective fabric bag the Hand Warmer will get very hot until fuel is consumed. 00 NOT TOUCH.
• To avoid a low temperature burn of the skin, do not allow the Hand Warmer to remain on only one of your body. Change its position frequently. Do not use while sleeping. Low-temperature burn is a burn caused by long time contact with a heat source having a temperature higher than body temperature but not high enough to cause immediate burning. Symptoms can include red spots or blisters on the skin. It may occur without you being aware of it.
• Children, the elderly, the handicapped, and those unable to remove the Hand Warmer by themselves should be supervised when using this product. Remove Hand Warmer immediately from the skin if it becomes uncomfortably hot. If used incorrectly or out of the supplied protective fabric bag, higher temperatures will occur, which can cause burns and permanent scarring.

LIGHTER FUEL IS FOR EXTERNAL USE ONLY

• DANGER OF FIRE! Do not put lighter fluid directly on burner to ignite. Do not lay Hand Warmer down after filling and before ignition. Allow Hand Warmer to rest in the upright position for at least two minutes before lighting.
• Do not allow lighter fuel or Hand Warmer to contact eyes or mouth. Consult a physician if fuel is swallowed.
• Do not induce vomiting. For medical emergency intonation 24 Hours a day 1-800-255-3924 North America or + 1-813-248-0585 Worldwide.

How to fill

1. Make sure Hand Warmer is coot to touch. Remove Hand Winner lid. then remove the catalytic burner unit from the base unit by holding it lengthwise (upright with Zippo logo). {Burner unit may have a tight fit.) See Figure 1.
2. Pour Zippo Lighter Fluid into the appropriate 6 or 12 hour plastic filling cup provided in the package. Do not spill. See Figure 2.
   • For 6–Hour Warmers: Fill to line for about 6 hours of heat.
   • For 12-Hour Warmers: Fill to line for about 12 hours or heat
   • Do not fill cup above the line.
   • Then carefully and slowly pour contents of filling cup into the spring filling hole on the Hand Warmer body, while maintaining the Hand Warmer in an upright position. See Figure
3. Do not overfill. Overfilling will cause malfunction. risk of injury and fire.
4. If filler nozzle pushes the white absorbent material down during filling, use toothpick or similar tool to fluff material up to top of hand warmer body.
5. Keep the Hand Warmer upright and careful-,, replace the catalytic burner unit, making sure it is fully seated.
6. Carefully wipe off any excess fuel from the Hand Warmer surfaces and allow excess fuel to evaporate before igniting.
7. Be sure fuel can is closed and there is no spilled fuel in the vicinity before igniting. Fuel is flammable.
8. Allow Warmer to rest In the upright position for at least two minutes before igniting to allow fuel to be fully distributed in the absorbent material and become available to the catalytic burner.
9. Do not lay Hand Warmer down after filling and before ignition. If laid down, liquid fuel can get into the catalytic burner, which may cause a flame to occur upon ignition. If a visible flame develops, it must be put out. Usually, any flame can be easily blown out but use extreme care and caution. If necessary, place hand warmer on fire proof surface and allow the flame to burn out or be extinguished in a safe manner.
10. Hand Warmer may not operate for as long as stated following initial filling and ignition due to break-in process of catalytic burner and absorbent material.

How to ignite

1. With the lid off the Hand Warmer, hold the base unit upright with one hand and apply flame to the catalytic burner unit for approximately 10 seconds using !he other hand. See Figure 4. ignition upon first use after initial filling could take longer than expected and require application of flame more than one time. Flame can come from a Zippo lighter, utility lighter or a match. Follow lighting appliance use instructions. Keep hands and clothing away from any flame. The Hand Warmer heats by a catalytic process. There is no flame present after ignition. Presence of flame upon ignition indicates over filling. Put flame out and allow excess fuel to evaporate before attempting re-ignition.
2. After flameless ignition has been confirmed, replace Hand Warmer lid, then place warmer into the provided supplied protective fabric bag. See figure 5. The Hand Warmer must always be placed in the supplied protective fabric bag to prevent over-heating. Your Zippo Hand Warmer will now provide comfortable warmth hours. After ignition, heat is provided by a catalytic process without flame.
3. Once ignited there is no safe way to stop the heating action. If necessary. place the Hared Warmer in the supplied protective fabric bag and place on a fireproof surface until the fuel is exhausted and the Hand Warmer is cool to the touch. Catalytic burner is expendable. Burner lasts for many uses depending on how it is used and duration of use. Replace periodical. It is not warranted.

Product Demonstration Videos
Zippo creates demonstration videos for many of its Outdoor products. look for them on your local distributor’s website Ousted in this instruction booklet), Zippo’s YouTube Channels (www.youtube.com/ ZippoOutdoor) and Zippo.com .

Questions?
If you have questions about this or other Zippo products, please call the Zippo distributor in your country using the number listed in this instruction booklet.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>