DEBIX Windows 10 IoT Enterprise User Manual
- June 12, 2024
- DEBIX
Table of Contents
Polyhex Technology Company limited
DEBIX_Windows 10 IoT Enterprise
User Manual
Version: V2.2 (2023-05)
Windows 10 IoT Enterprise
Complied by: Polyhex Technology Company Limited (http://www.polyhex.net/)
Windows 10 IoT is a member of the Windows 10 family that brings enterprise-
class power, security, and manageability to the Internet of Things. DEBIX
products support Windows 10 IoT running on i.MX 8M Plus processors with highly
optimized systems that make it easier to build secure, scalable solutions from
device to cloud, from resource provisioning to managing and protecting devices
at scale.
DEBIX with Windows 10 IoT will be the new platform for fast, secure and real-
time data processing on the intelligent edge.![DEBIX Windows 10 IoT Enterprise
- Figure 1](https://manuals.plus/wp-content/uploads/2023/08/DEBIX-Windows-10 -IoT-Enterprise-Figure-1.jpg)
Chapter 1 Windows 10 IoT Introduction
Windows 10 IoT is a member of the Windows 10 family designed for a wide range
of smart devices, including larger, more complex devices from small industrial
gateways to point-of-sale terminals and ATMs. It leverages Windows’ embedded
experience, ecosystem and cloud connectivity to provide an end-to-end solution
for creating the Internet of Things with secure devices. These devices can be
quickly provisioned, easily managed, and seamlessly connected to an overall
cloud strategy.
1.1. Editor
Windows 10 IoT is available in two editions:
-
Windows 10 IoT Core, the smallest member of the Windows 10 operating system family.
While only running a single app, it still has the manageability and security expected from Windows 10. -
Windows 10 IoT Enterprise, a full version of Windows 10 with specialized features to create dedicated devices locked down to a specific set of applications and peripherals.
It is because of the uniqueness of Windows 10 IoT Enterprise that DEBIX has
chosen to support Windows 10 IoT Enterprise.
1.2. Feature
Windows 10 IoT Enterprise LTSC is the latest operating system designed for
embedded and IoT devices. It’s productive, trusted, and smart, and can be used
to build any kind of OEM style appliance.
Main features:
- Support built-in Microsoft Edge browser
- Customize Windows Update user experience via Device Update Center (DCU)
- Support Soft Real-Time
- Linux Subsystem for Windows (WSL)
- Support GPU computing for machine learning and other compute-intensive workflows
- Support WPA3 H2E standard for enhanced Wi-Fi security
- Unified Write Filter (UWF) updates, including allowing creation and use of UWF Swapfile (DISK Overlay), read-only media mode, etc. on any volume
Chapter 2 Windows 10 IoT Enterprise Installation Guide
Windows 10 IoT Enterprise specific release information is as follows:The following is a brief introduction to the installation process of Windows 10 IoT Enterprise systems on DEBIX.
2.1. Download installation package
- Prepare a Win10(and up) PC.
- Download the latest system installation package we provide for DEBIX, at official website address: https://debix.io/Software/download.html.
- The system installation package contains firmware.rar and win10_iot_x.x.x-xxxxxxx.img.
The firmware.rar file needs to be extracted for file burning. The composition of system installation package is referenced as follows:
2.2. Installation
Due to the large space occupied by the system installation package, two points
need to be met:
- DEBIX onboard memory capacity at least 8GB, eMMC capacity at least 16GB.
- Prepare a Micro SD Card of 8GB or more.
Note: DEBIX DIP switch, up is 1, down is 0.
2.2.1. Flash on DEBIX Model A
-
Turn the DIP switch of the DEBIX Model A to 01 (USB mode).
-
Prepare a USB-Type-c cable to connect PC to the motherboard OTG port.
-
Burn firmware to eMMC: On a win10 PC, open WindowsPowerShell in administrator mode.
• Type the command to enter the firmware folder• Enter flash command to start burning -
Use the Etcher tool to write the image to the Micro SD card. Etcher download address: https://www.balena.io/etcher/.
Burn img file: Start Etcher, insert the Micro SD Card, select the img file to be installed and the corresponding disk of Micro SD Card.
If there is a prompt as shown in the figure below, click Continue, then click Flash, and wait for the burning to end. When prompt Flash Complete! It means that the system has been successfully burned into the Micro SD Card. -
Make sure DEBIX is powered off, set the DIP switch to 10 (eMMC mode), and insert the Micro SD Card.
-
Connect the power supply and wait for the system to be installed automatically. Do not power off during the installation process.
-
After the system is automatically installed, DEBIX will automatically restart and enter the WindowsToGo page, and wait for the system to load after making settings according to your region and other conditions.
-
After the system is loaded, it can be used as normal. The desktop we see below is the familiar Windows 10 interface.
2.2.2. Flash on DEBIX SOM A IO Board
-
Turn the DIP switch of the DEBIX SOM A IO Board to 0001 (USB mode).
-
Prepare a male to male USB cable to connect PC with USB-OTG port highlighted on the board below.
-
Burn firmware to eMMC: On a win10 PC, open WindowsPowerShell in administrator mode.
• Type the command to enter the firmware folder• Enter flash command to start burning -
Burn img file: Start Etcher, insert the Micro SD Card, select the img file to be installed and the corresponding disk of Micro SD Card. If there is a prompt as shown in the figure below, click Continue, then click Flash, and wait for the burning to end. When prompt Flash Complete! It means that the system has been successfully burned into the Micro SD Card.
-
Make sure the motherboard is powered off, set the DIP switch to 0010 (eMMC mode), and insert the Micro SD Card.
-
Connect the power supply and wait for the system to be installed automatically. Do not cut off the power during the installation process.
-
After the system is automatically installed, DEBIX will automatically restart and enter the WindowsToGo page, and wait for the system to load after making settings according to your region and other conditions.
-
After the system is loaded, it can be used as normal. The desktop we see below is the familiar Windows 10 interface.
Chapter 3 Functions Supported on Windows 10 IoT Enterprise
Currently, Windows 10 IoT Enterprise has been adapted to some interface
functions of DEBIX
Model A and DEBIX SOM A IO Board.
Important: When used with USB, the size of SDRAM is limited to 6GB due to
USB host controller issues.
The supported functions are as follows:
Function | DEBIX Model A | DEBIX SOM A 10 Board |
---|---|---|
OS | Windows 10 loT Enterprise LTSC 21H2 | |
Power input | DC 5V | DC 12V |
USB | 1) 4x USB3.0 Host Type-A | |
2) 1x USB2.0 OTG Type-C | 1) 4x USB3.0 Host Type-A |
- 3x USB2.0
Storage| Micro SD Card
Ethernet| 1) 1 x Ethernet - 1 x pin header (without network
transformer)| 2 x Gigabit Ethernet
LVDS| 1x LVDS, support 1280 x 800
HDMI| 1x HDMI, support 1920 x 1080, 1366 x 768@60, 1024 x 768@60.
Support the option of rotated modes and enlarges modes.
MIPI DSI| 1x MIPI DSI, support 1920 x 1080
MIPI CSI| 1x MIPI CSI
Audio| –| Support left and right speaker SPK
Wi-Fi & Bluetooth| –
Key| 1) 1 x Reset key - 1 x ON/OFF key| 1 x ON/OFF key
Other I/O
SPI/GPIO/I2C/CAN/PWM/UART
Note: DMA mode is available in UART
References
- DEBIX Embedded Computer Solutions
- Polyhex
- Software
- 该页面没有找到
- balenaEtcher - Flash OS images to SD cards & USB drives