BROILMASTER PREMIUM GRILLS BSACT-26 Grill Cart User Guide

BEFORE GETTING STARTED

Unpack and lay out all of the included parts. A A
Most of the stainless-steel pieces come with a protective film. Remove all of the film and take care with stainless steel components as to not  scratch them during the assembly process.

Overview – Assemble On Level Surface

Hardware And Parts List

Follow Steps 1 Through 5.

STEP 1:

Remove all parts from the carton and please use an assistant to help in this cart assembly.

STEP 2:

With the Bottom Panel #2 positioned upside down on a protective surface, attach all of the Locking Caster #1 using 4 pcs M5x12 screw and 4 pcs M5 flat washer on each.

STEP 3:

Attach the Right and Left Side Panel #3A and #3B to the Bottom Panel #2 by using 6pcs M5 x12 screw and 6pcs M5 flat washer. (The tank hole of Bottom Panel #2 is on the right side.)

STEP 4:

Attach Bottom Back Panel #4 to the Side Panels (#3A & #3B) by using 6 pcs M5x12 screw and 6 pcs M5 flat washer and then to the Bottom Panel #2 by using 3 pcs M5x12\ screw and 3 pcs M5 flat washer.

STEP 5:

Attach Upper Back Panel #5 to the Side Panels (#3A and #3B) by using 4pcs M5 x12 screw and 4pcs M5 flat washer, and then to use 3pcs
M5x12 screw and 3pcs M5 flat washer to be attached with Bottom Back Panel #4.

Follow Steps 6 Through 8.

STEP 6:

Attach Step Panel #6 to the Bottom Panel #2 by using 2 pcs M5x12 screw and 2 pcs M5 flat washer, and then to use 2 pcs M5x12 screw and 2pcs M5 flat washer to be attached with Left Side Panel #3A

STEP 7:

Attach the Tank Bracket with Ring #7 by using 2pcs plum screw, and then to use 4 pcs M5x12 screw and 4 pcs M5 flat washer to be attached with Bottom Back Panel #4.

STEP 8:

Attach the Assembled Door Unit #9 to the Right & Left Side Panel (#3A and #3B) by using 8 pcs M5x12 screw and 8 pcs M5 flat washer, and then to use another 3 pcs M5x12
screw and 3pcs M5 flat washer to be attached with the Bottom Panel #2.

Follow Steps 9 And 10.

STEP 9:

Attach two Door Handles #8 to the assembled
Door Unit 39 by using 4 pcs M4x8 screw and 4 pcs M4 flat washer

STEP 10:

Attach 4 pcs Side Shelf Brackets #10 to the Right and Left Side Panels #3A &

3B by using 16 pcs M5x12 Countersunk Head Screw,

and then attach a Side Shelf #11 to each Side Panel.

Follow Step 11.

STEP 11:

Finally, the barbecue is ready to be installed into the cart. Once installed, secure the barbeque head with 2 pcs M5x12 screw through the holes that are on each side, towards the front, on the inside of the firebox.

NOTE 1:

The mounting holes in the Bottom Back Panel 4 are for mounting the transformer. (Theseholes are only for the BBQ head with lights.)

NOTE 2:

The larger round holes in the Upper and Bottom Back Panel #4 & #5 are for the gas hose and the transformer wire.

NOTE 3:

Some adjustments may be needed to properly position and level the cart. Make sure to tighten all screws with a screwdriver.

Installation Is Complete.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>