Lotus Lantern Slim Surface Led Light Instruction Manual
- June 12, 2024
- Lotus Lantern
Table of Contents
Lotus Lantern Slim Surface Led Light
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
SAFETY PRECAUTIONS
- TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
- THIS – PERSON FAMILIAR PRODUCT WITH MUST THE BE CONSTRUCTION INSTALLED IN AND ACCORDANCE OPERATION WITH OF THE THE PRODUCT APPLICABLE AND THE INSTALLATION HAZARDS CODE INVOLVED.BY A
- CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH AUTION RISK CIRCUIT OF FIRE . CONDUCTOR.
- FOR EXETEMAL USE ONLY.RECOMMEND APPLYING WATERPROOF SILICONE TO SEAL AROUND TRIM AND CEILING.
TOOLS AND MATERIALS REQUIRED:
PACKAGE CONTENTS
PART | DESCRIPTION | QTY | NOTE |
---|
- A
- B
|
- LED Low Profile Flus mount
- Mounting screws
|
- 1
- 2
|
C| Wire nut| 3|
D| Mounting plate| 1|
E| Springs| 2| Optional
F| E26 lamp holder| 1| Optional
INSTALLATION INSTRUCTION
Slim surface led light
Option #1: FLUSH MOUNT
-
Prior to installation, install mounting plate into the electrical outlet box with mounting screws. Drive screws completely to the end of the junction box.
-
Connect supply wires to wires on fixture with wire nuts or push wires into Quick Connector. Connect white to white, black to black, and copper wire to copper wire as grounding connection.
-
Completing the installation by pushing the fixture into the mounting plate For 0-1 OV dimming circuits, connect grey to grey and purple to purple.
Option #2: RETROFIT A RECESSED CAN
- Insert wires into Quick connector. Black to black and white to white. Attach ground wire to ground screw in recessed can.
- Turn E26 lamp holder into socket base.
- Connect Quick Connectors Tuck all wires into recessed can. Squeeze springs and push up into recessed can.
844 245 6887
support@lotusledlights.com
WWW.LotusLEDLights.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>