Sensor Switch MEW-OVS100W Switch Wall Switch Sensor User Guide
- June 1, 2024
- sensor switch
Table of Contents
Sensor Switch MEW-OVS100W Switch Wall Switch Sensor
Sensor Switch™ Mobile App
Visible Light Programming Quick Start Guide
The Sensor Switch™ Mobile App uses your smartphone’s display or Bluetooth® wireless technology to configure settings on VLP-enabled Sensor Switch occupancy sensors, photocontrols and luminaires available with standalone embedded controls from Sensor Switch.
Set occupancy time delay, trim values, photocontrol options and more with this visually intuitive tool. Sensor customization has never been easier.
Download
the App
Sensor Switch™ VLP Mobile App
| 
---|---
Program Settings
Step 1
Select Sensor
Step 2
Set or change the 3-digit PIN within 45 minutes of restored power, or after a
deliberate power cycle.
Step 3
Toggle the high trim option and slide the status bar down to 40%. Select the
Next button.
Step 4
Press send as shown above to initiate the 3-second countdown timer. Within the
3-second time window, flip the phone over and aim display towards the sensor
within 6-12 inches.
Step 5
The mobile display will flash a series of pulses, which will illuminate onto
the sensor. Do not cover the display. The camera flash will pulse once to
indicate programming complete. Please see below feedback codes highlighting
programming acceptance.
Feedback Codes
| Room Lights | LED | Meaning |
|---|
|
Blink–Blink
| Successfully set PIN and/or configuration option.|
|
Rapid Blink
| Correct PIN, configuration not modified.|
|
Rapid Blink
| Incorrect PIN, VLP enabled|
|
No Blink
| Not VLP enabled|
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Acuity Brands is under license. Other trademarks and trade names are those of their respective owners.
Customers Support
One Lithonia Way, Conyers, GA 30012 | Phone: 800.535.2465 |
www.acuitybrands.com
© 2021, 2023 Acuity Brands Lighting, Inc. All Rights Reserved. |
SSI_925693.03_1123
