Antari M-11 Dual Nozzles Stage Fog Machine User Manual

Antari M-11 Dual Nozzles Stage Fog Machine

Product Information

The M-11 Dual Nozzles Stage Fog Machine is a professional-grade fog machine designed for stage and event use. It produces thick fog to enhance lighting effects and create a captivating atmosphere. This fog machine features dual nozzles for maximum coverage and has various safety precautions to ensure safe operation. Please read the user manual carefully before operating the machine to understand its installation, operation, and safety guidelines.

Product Usage Instructions

1. 1.  **Read the User Manual:**

It is essential to read the entire user manual before operating the machine. Keep the manual accessible for future reference.

1. Safety Precautions:
   • DANGER: Connect the machine to the correct rated voltage and ensure proper grounding to avoid electrical shock or burns. Refer to Appendix I on page 23 for grounding instructions.
   • WARNING: Maintain a minimum distance of 1 meter from the machine’s nozzle when it is running, as the nozzle gets extremely hot.
   • Operate the machine on a flat, level, well-ventilated surface, with at least 1 meter of space around it. Ensure there are no flammable gases or materials nearby.
   • Do not disassemble, repair, or modify the machine, as it may result in damages, malfunction, electrical shock, or fire.
   • The machine should only be operated by adults or professionals. It is not intended for use by individuals with reduced physical, sensory, or mental capabilities, including children.
   • Do not leave the machine running unattended. Turn off all powers before leaving. Supervise children to prevent them from playing with the machine.
   • Avoid using the machine upside down or tilting it, as it may cause damages or malfunctions.
   • Store the fluid in a well-ventilated area without direct sunlight and keep it out of reach of children.
   • In case of eye contact or accidental ingestion of the fluid, seek immediate medical attention.
2. General Precautions:
   • CAUTION: Keep the machine dry at all times. Do not expose it to water, rain, or moisture.
   • Ensure the power outlet is undamaged and secure before plugging in the power cord. If the power cord is damaged, it must be replaced by Antari or its local dealers to maintain warranty coverage.
   • Before operating the machine, ensure that the fluid tank is filled to avoid the pump being in an idling state, which can lead to overheating or malfunction.
   • When transporting the machine, ensure that the fluid is drained and the tank is empty. It is recommended to use the original packaging for transportation.
   • The machine is designed for indoor use only. Do not operate it in areas with unstable voltage.
   • If you experience any strange sounds or malfunctions, immediately turn off the power and unplug the power cord.

Introduction

Please read all the user manual before operating the machine, and place the manual where the user can refer to it at all time. The manual includes how to install and operate the machine under safe condition and explain all the labels printed on the machine. If you encounter any problem, contact your local Antari dealer for assistant immediately.

Safety Information

**| DANGER| If the danger is not avoided, it will cause death or serious injury
---|---|---
**| WARNING| If the warning is not heeded, it can cause death or serious injury.
**| CAUTION**| If the precaution is not taken, it may cause minor or moderate injury.

DANGER

• Must connect the machine to the correct rated voltage or it might lead to an electrical shock or a burn and may cause serious consequences.
• Must connect the machine to a protected circuit and ensure it is properly grounded to avoid the risk of electrocution. For grounding instruction, please refer to Appendix I on page 23.
• Do not operate the machine with a bundled power cord, it could lead to a fire hazard.
• When operating the machine, do not point at people, animals, or fire.

WARNING

• Machine’s nozzle is extremely hot, please keep at least 1m distance from the nozzle when the machine is running.
• Please operate the machine on a flat, level hard and well ventilated surface area, reserve at least 1m space around the machine and make sure there is no flammable gas or material nearby.
• Do not disassemble, repair or modify the machine, it may cause damages, malfunction, risk of electrical shock or result in fire.
• The machine can only be operated by adults or professionals, is not intended for use by person with reduced physical sensory, mental capabilities, or lack of experience and knowledge including children.
• Do not leave the machine running unattended, make sure all powers are off when leaving.
• Children should be supervised to ensure that they do not play with the machine.
• Do not use the machine upside down or tilt it, it might cause damages or malfunction.
• Please store the fluid inside in a well ventilated area without direct sunlight and keep out of reach of children. In case of eye contact or accidentally swallow the fluid, please seek medical attention immediately.

CAUTION

• Keep the machine dry at all time. The machine is not waterproof, do not expose the machine to water, rain, or moisture environment.
• Please make sure the power outlet is not damaged or loose before plug in the power cord.
• If the power cord is damaged, it must be replaced by Antari or its local dealers, otherwise the warranty will be void.
• Before operating the machine, please sure the fluid is filled in the fluid tank to avoid the pump in idling state which could lead to overeat or malfunction.
• Before transporting the machine, please make sure the fluid is drained and tank is empty. (Recommend using original package)
• The machine is for indoor use only.
• Do not operate the machine in any area with unstable voltage.
• If you experience strange sound or malfunction, turn off the power and unplug the power cord immediately and contact your local Antari dealer for assistant.
• Do not contact any moving part.
• Only use accessories recommended or sold by Antari.
• Please make sure the power is off when not using the machine and unplug the power cord if not intend to use for a long period of time.
• To disconnect, turn all controls to the off position, then remove plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Unplug from outlet before servicing or cleaning.
• Do not operate the machine with a damaged cord or plug, or after the machine malfunctions or is dropped or damaged in any manner. Return machine to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.
• To ensure the lifespan of the machine, please only use the fluid manufactured by Antari, do not use other fluid or additive, otherwise it may clog the heater and cause malfunction.

Before operating the machine, please read all warning labels on the machine, description as below;

Top Cover Printing
WARNING!

• HOT NOZZLE!
• KEEP AT LEAST 1 METER DISTANCE

LIQUID
ONLY USE MANUFACTURER DESIGNATED FLUID.
ATTENTION!

• NEVER ADD FLAMMABLE SUBSTANCES
• Front Cover Printing

WARNING!
DISCONNECT POWER BEFORE CHANGING FUSE USE ONLY WITH ADULT SUPERVISION DO NOT OPERATE WITHOUT LIQUID FOR INDOOR USE ONLY. KEEP DRY NO USER SERVICEABLE PARTS INSIDE

Package Contents

Inspection

Immediately upon receiving the machine, carefully unpack the carton, check the content to ensure it is the correct model and all parts are included. If any part appears to be damaged or missing during transportation, please contact your local dealer and return in original package for inspection.

• 1 x M-11 Dual Nozzles Fog Machine
• 1 x 10 Liters Fluid Tank
• 1 x Neutrik powerCON Power Cable
• 1 x User Manual or Scan QR Code on the Machine

Optional Accessories

Machine Details

Technical Label Information

Please read the technical label information on the back of the machine before operating it.

1. Model Name| 5. Breaker/Fuse
2. Input Voltage| 6. QR CODE for User Manual
3. Frequency| 7. Serial No.
4. Rated Power|

Fog Fluid

CAUTION
Always turn off the power before filling the fluid tank. Do not add flammable liquid to the fluid tank. If fluid gets inside the machine, please contact your local Antari dealer for assistant.

• Only the fog fluid manufactured by Antari can be used, do not mix or dilute the fog fluid. Due to improper storage or using other fluid might clog the heater and cause malfunction.
• The machine is tested and calibrated with the specific fog fluid to get the best performance.
• Please empty the fluid in the tank before switching to another fluid to avoid mixing.
• Only the essence manufactured by Antari can be used, and add according to the ratio recommended by Antari (Recommended ratio is 1:1000), if using other essence or different ratio might clog the heater and cause malfunction.
• The warranty on your fog machine will be void if you use fog fluid not manufacture by Antari.

Setting and Manual Operation

WARNING
Machine falling off might cause serious injury, please make sure it is secure and firm on the overhead.

Step 1. Place the machine on a flat, level hard and well ventilated surface area and reserve at least 50 cm open space around the machine, and make sure there is no flammable gas or material nearby;
Step 2. Fill the fluid tank with Antari approved fog fluid, and make sure the tube is not twisted;
Step 3. Connect the machine to the power outlet. Please read the technical label on the back of the machine and make sure the power outlet is the correspond to the rated voltage for the machine;
Step 4. Turn on the machine, warm up process takes approximately 13 minutes. Once the machine has reached operating temperature, the LCD display will show “Ready To Fog”. Now the machine is ready for operation;
Step 5. Please read “8. Control Setting” to operate the machine;
Step 6. To turn off the machine, please make sure the machine is not operating then turn of the power. If you will not use the machine a long period of time, please remove the power cord.

Control Settings

M-11 Dual Nozzles Fog Machine can be operated in the following modes. The machine can only accept 1 type of signal at a time.

• Manual
• Timer
• DMX512
• Wireless
• W-DMX

Control Panel Description

Fogging in Volume Mode

(100% output)

Fogging in Timer Mode

(100% output)

Menu and Setting

Menu Options Description

DMX

| Address| 001-512
Channel Mode| 1 Channel / 3 Channel
Link Mode| Wired/Wireless
W-DMX| Unlink

Timer

| Interval| 5 – 200 sec
Duration| 1 – 200 sec
Output Level| 1 – 100%

Manual

| Output Level| 1 – 100%
Priming| Start / Stop
Heater| On / Off

Information

| Software Version| v1.2
Wireless Signal| ● : Wireless DMX present

◎: No DMX present

⊙: Link to TX lost

○ : Not assigned

Fluid Level| Fine / Empty
Device Hour| XX Hour

Accumulated runing time

Setting

| Continuous Output| On / Off
Pump Mode| Single / Dual
Wireless Remote| Pair / Unpair
Fluid Sensor| On / Off
LCD Backlight| Auto Off / Low / Normal
Keypad Sound| On / Off
Auto Start| On / Off
Factory Reset| Proceed
Language| EN / 中文 (Chinese)
Fluid Option| FLG / FLY / FLZ / FLR

Machine Status

Machine Status with LCD Display

Antari M-11

v1.2

| Software Version
AC Voltage

AC-120V 60Hz

| Input Voltage

Antari M-11     PWS Ready To Fog

| Machine is ready to Operate W: Wireless On

S: Fluid Sensor On

P: Wireless DMX On, please see 13.1 for W-DMX Signal Status

Antari M-11   PWS

Heating Off

| Heater Off
Manual Output

100%

| Fog Output level at Manual Mode
Interval     200 sec

Duration   200 sec

| Running at Timer mode, Interval time

Running at Timer mode, Duration time

DMX-512

Add: XXX

| Current DMX 512 channel
Manual Priming| Priming Fluid
Power off

180 sec

| Power Off, countdown 180 sec
Sleeping| Sleeping
Warming Up

10 %

| Heating up
Empty Fluid| No fluid. Please refill the fluid tank and then press [VOLUME] knob

continuously to prime fluid from the tank.

Wrong!

Heater Overheat!

| Heater is over heat, unable to operate. Please contact your local Antari dealer

for assistance.

Warning!

Temp Error

| Heater temperature is abnormal, unable to operate. Please contact your local

Antari dealer for assistance.

• If LCD control panel display “Warning”, please stop operating and turn off the machine immediately. Please contact your local Antari dealer for assistance.

DMX Connection

DMX Connector Pin Assignment
This machine has a XLR 3-Pin and 5-Pin connector for DMX connection. The diagram below indicates pin assignment information;

DMX Channel Function

RDM Function
M-11 Dual Nozzles Fog Machines is RDM enabled, allowing control system to configure, monitor and manage. See below table for supported RDM parameters.

GET

Allowed

| SET

Allowed

| Category| RDM Parameter ID’s (Slot 21-22)| Value| Required
---|---|---|---|---|---
 |  | NetworkManagement

| DISC_UNIQUE_BRANCH| 0x0001| O
 |  |  | 0x0002| O
 |  |  | 0x0003| O

O|  |

RDM Information RDM

| QUEUED_MESSAGE| 0x0020|
O|  | STATUS_MESSAGES| 0x0030|
O|  | SUPPORTED_PARAMETERS| 0x0050| O
O|  | PAPAMETER_DESCRIPTION| 0x0051| O
 |  |  |  |  |
O|  |

Product Information

| DEVICE_INFO| 0x0060| O
O|  | PRODUCT_DETAIL_ID_LIST| 0x0070|
O|  | DEVICE_MODE_DESCRIPTION| 0x0080|
O|  | MANUFACTURER_LABEL| 0x0081|
O| O| DEVICE_LABEL| 0x0082|
O|  | SOFTWARE_VERSION_LABEL| 0x00C0| O
 |  |  |  |  |
O| O|

DMX512 Setup DMX512

| DMX_PERSONALITY| 0x00E0|
O|  | DMX_PERSONALITY_DESCRIPTION| 0x00E1|
O| O| DMX_START_ADDRESS| 0x00F0| O
O|  | SLOT_INFO| (0x0120)|
O|  | SLOT_DESCRIPTION| (0x0121)|
O|  | DEFAULT_SLOT_VALUE| (0x0122)|
 |  |  |  |  |
O|  | Sensors

| SENSOR_DEFINITION| 0x020|
O| O| SENSOR_VALUE| 0x0201|
 |  |  |  |  |
O|  | Control

| DEVICE_HOURS| 0x0400|
O| O| IDENTIFY_DEVICE| 0x1000| O
O| O| POWER_STATE| 0x1010|

WTR-20 Wireless Remote (Optional)
WTR-20 Wireless Remote is an optional accessory for M-11 Dual Nozzles Fog Machines, it included a W-2 wireless transmitter and a W-2 wireless receiver. If you already purchased the wireless model, it’s ready to use. If you purchase the WTR-20 Wireless Remote afterwards, please follow the instruction below. If you encounter any problem, please contact your local Antari dealer for assistant.

W-2 Wireless Transmitter & Receiver

• Battery: 27A 12V
• Effective Range: The effective range is approximately 50 meter, depends on actual condition, it may vary.
• If effective range is significantly shorter, please change battery.
• W-2 wireless transmitter has 4 buttons, each function as follow:

W-2 Wireless Receiver Installation
If you purchased the WTR-20 Wireless Remote afterwards, please follow the instructions below to install the receiver. If you encounter any problem, please contact your local Antari dealer for assistant.

1. Please see graph 1, remove the cover from the pointed place;
2. You will see a white cable like graph 2, pull it out and connect to the W-2 wireless receiver;
3. Screw it back to the machine like graph 3 and follow the instruction on 12.3 for pairing.

Pair & Unpair
Each receiver can pair up to 5 transmitters, please follow the steps below to pair or unpair the transmitters;
Step 1. Press and hold the [TIMER] knob for 3 seconds to enter menu;
Step 2. Rotate the [TIMER] knob to [SETTING] then choose [Wireless Remote];
Step 3A. Press the [TIMER] knob to show , please press it again to show , then please press [Button A] of your W-2 Wireless Transmitter and wait display shows < Set Ok> to complete the pair procedure.
Step 3B. Press the TIMER knob to show , please press it again to show and then shows < Set Ok> to complete the unpair procedure.

TIMO-W-DMX-PCBR W-DMX Receiver (Optional)
TIMO-W-DMX-PCBR W-DMX Receiver is an optional accessory for M-11 Dual Nozzles Fog Machines, it included a W-DMX PCB and a W-DMX receiver. If you already purchased the W-DMX model, it’s ready to use.
If you purchase it afterwards, please refer to the TIMO Installation Manual. If you encounter any problem, please contact your local Antari dealer for assistant.

Status of W-DMX

TIMO-WTR-70 2in1 Wireless Module (Optional)
TIMO-WTR-70 2in1 Wireless Module is an optional accessory for M-11 Dual Nozzles Fog Machines, it included a W-2 wireless transmitter, a 2in1 Receiver and W-DMX PCB. If you already purchased machine include this option, it’s ready to use. If you purchase it afterwards, please refer to the TIMO Installation Manual. If you encounter any problem, please contact your local Antari dealer for assistant.

Service and Maintenance

DANGER
Disconnect the power cord before starting maintenance operation!

• Always keep the machine clean and dry.
• Can use air compressor, vacuum or a soft brush to remove the dust on the machine.
• Can use a slightly damp cloth to clean the casing.
• Before store the machine, please make sure the machine is completely cool down to avoid moisture inside causing malfunction.
• It is recommended to run the machine at least once a month in order to maintain the machine’s best performance and output condition.
• Excessive dust and build up liquid residue will reduce the performance and cause overheat.

Breaker Reset (2 in 1 Power Switch)
The 2 in 1 power switch combines power and breaker function. Please follow below steps to reset the breaker;
Step 1: Please power switch to the OFF position;
Step 2: Wait 60 seconds;
Step 3: Flip the switch back on.

• If the breaker (switch) still jumps off after reset, please contact your local Antari dealer for assistance.

Breaker Specification

• 120V = 15A 250V
• 240V = 9A 250V

Technical Specifications

EU Model: AC 220-240V, 50/60Hz 7.0A

Rated Power| 1600W
Warming-up Time| 13 minutes (approx.)
Fluid Consumption| 400 ml/min (100% output)
Fluid Tank Capacity| 10 Liters (2.64 Gallon)
Compatible Fluid| Antari FLG Heavy Fog Fluid、Antari FLR Light Fog Fluid、FLH Super Fog Fluid、

Antari FLZ Long Hang Time Fog Fluid

Ambient Temp. Range| 0°C – 40°C (32°F – 104°F)
Control Methods| Manual、Timer、DMX512、Wireless (Optional)、W-DMX (Optional)
Interface| XLR 3-Pin and 5-Pin Connector (DMX) 、Neutrik powerCON Connector (Power)
DMX Channels| 1 or 3 Channel
Included Accessories| N/A
Optional Accessories| WTR-20 Wireless Remote、TIMO-W-DMX-PCBR W-DMX Receiver、TIMO-WTR-

70 2in1 Wireless Module

Dimension| L 675 W 320 H 285 mm (L 26.57 W 12.60 H 11.22 inch)
Weight| 25.0 kg (55.10 lbs.)

Warranty

Disclaimer
We guarantee the merchandise manufactured by us to be free from defect in material and workmanship for a period of one year. Our obligation and liability under this warranty shall be restricted to repair or replacement at our factory or local authorized dealer. We assume no liability of the products that are improperly used or used for any purpose other than that for which they are specially designed. This warranty shall not apply to any merchandise which has been repaired, altered or assembled outside our factory in any way so as in our judgment to affect its performance, nor which has been subjected to misuse, negligence, or accident nor to any merchandise operated contrary to our printed instructions. We will not allow or be liable of any loss or any damages of any kind in connection with the use, sale, or repair of any merchandise purchased from us.

Machine Dimension

Appendix I – Grounding Instruction
This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment- grounding conductor. If repair or replacement of the cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal. Check with a qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is for use on a nominal 120V circuit, and has a grounding plug that looks like the plug illustrated in sketch A in Figure. A temporary adaptor, which looks like the adaptor illustrated in sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adaptor should be used only until a properly grounded outlet can be installed by a qualified electrician. The green colored rigid ear, lug, and the like, extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Wheneverthe adaptor is used, it must be held in place by the metal screw.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>