osmo Z7 GPS Tracker User Manual

osmo Z7 GPS Tracker

Product Information

The Osmo GPS Tracker is a 4G intelligent waterproof locator with GPS+ Beidou +WIFI+LBS multi-mode precise positioning. It offers real-time positioning, SOS call, voice monitoring, health meter, and low power consumption. This device is designed for use as an elderly location mobile phone or student location card.

Product Specifications

B12(17) B28A,
WCDMA: Band 1258, GSM: Band 2358
Europe/Asia/Africa Version: FDD: Band 123578 20, TDD:
Band38394041, WCDMA: Band 1258, GSM: Band 2358
15| Operating temperature| -20 ~ +70
16| Operating humidity| 5% to 95% Non-condensing
17| Certificate| CCC and CE

Product Usage Instructions

Turning on/off the device:

To turn on the device, long press the power button for 5 seconds. To turn off the device without a SIM card, long press the power button. With a SIM card, go to the APP More – Settings – Remote shutdown to turn off the device.

Power button:

Long press the power button for 5 seconds to turn on the device. Short press the power button to turn off the screen, brighten the screen, hang up, or return to the interface.

SOS button:

After setting the SOS number successfully in the APP, long press the SOS button for 3 seconds to make an SOS call. After receiving the voice, press the SOS button to return to the interface.

Voice button:

Press the voice button twice to tell the time. Short press the voice button to listen when receiving a voice. When you receive an incoming call, press the voice button to answer the call.

Working Modes:

• Fast tracking: 1 minute (3 minutes) interval for uploading location data.
• Standard Tracking: 10 minutes interval for uploading location data.
• Power saving tracking: 1 hour interval for uploading location data.
• Disable tracking: Manually click the location icon to update the location data.

Electronic fence:

The radius of the electronic fence can be set between 200-2000 meters. When the device goes beyond this radius, an alert will be triggered.

Micro chat and other functions:

Additional functions include micro chat and other features that may be available in the device. Please refer to the user manual for detailed instructions on using these functions.

Installation and Use

Preparation before use:

• A. Buy a Nano-SIM phone card and power off the device before installing the card.
• B. The phone card must be enabled with caller ID, 4G Internet access, and call function.
• C. If you only need the positioning function without calling, you can install a data card.

Purchase and installation of SIM card:

• Step 1: Buy a Nano-SIM phone card. Enable the caller ID, 4G data flow Internet access function, and HD call function.
• Step 2: Install the phone card by following the provided instructions. Make sure to shut down the device before loading the card. Align the notch of the card with the upper left corner of the card slot and then install the device. Do not remove the phone card directly while the device is powered on to preventdamage to the card slot.

Product Description

Osmo GPS Tracker is a 4G intelligent waterproof locator with GPS+ Beidou +WIFI+LBS multi-mode precise positioning,real-time positioning, SOS call, voice monitoring, health meter and low power consumption. It can be applied tothe elderly location mobile phone, student location card.

Product Specification

Product Function

Product Outlook

Product Function Descriptions

Install and use

Preparation before use

• A、Please buy a Nano-SIM phone card, please power off the phone before installing the card.
• B、The phone card must be enabled with the caller ID /4G Internet access/call function.
• C、You can install a data card if you only need the positioning function without calling.

Purchase and installation of SIM card

• Step 1: Buy a Nano-SIM phone card. Please enable the caller ID, 4G data flow Internet access function, HD call function.

• Step 2: Install the phone card
  Please shut down before loading the card, as shown in the picture above. Place the metal side of the card chip up, align the notch with the upper left corner of the notch of the card into the card, and then install the device. Note: Please do not remove the phone card directly in the boot state to prevent the card from being burned out. Using a clipper card may cause improper insertion or removal and damage to the card slot.

• Power on after inserting the card

• Mobile APP download and login

Step 1: Download the APP
Search “AIBEILE” in the mobile APP store to download, or scan the QR code to download the app

Step 2: Log in to the APP

1. After the card is installed, observe whether there is a display in the status bar of the device: signal grid, 4G, networking arrow, HD (there is no word HD in the card of things), if there are all, you can log in the APP to operate the device function.
2. To start the mobile app, select “Device Login” in the lower left corner and enter your ID and password to log in. 2、After the device is successfully added, you can save the mobile phone number to be contacted in advance (the short number must also be saved for those who have opened the short number) and SOS number in the APP Settings. Other functions can be operated on the APP.
   Note : Manage the device through APP, all the operations on the device need to be pushed to the device through the network, via the network situation, sometimes there will be a delay, please don’t worry!

Charging device

• Please use 5V1A charging with CCC certification mark, 5V⎓1A MAX, do not use fast chargers with output voltage higher than 5V and output current higher than 2A, use will cause equipment damage!
• Before charging, please dry the sweat at the charging thimble to prevent the salt in the sweat from electrolyzing the gold plating layer, resulting in failure to charge.
• It is recommended that the charging time not exceed 4 hours.
  Please use the standard charging cable of the charger to charge the device, and ensure that the charging cable is aligned with the charging interface until the charging icon or “charging..” appears on the device screen. “, start charging (if the charging interface is dirty, please clean it first and keep the charging place dry).

Short Message Instruction Description

The SMS command is sent to the SIM card on the device from any mobile phone number (supporting the SMS sending and receiving function).
Set the SOS number, you can set 3 SOS numbers, when triggering an SOS emergency call, dial the three emergency numbers in turn, the connection is terminated or the cycle is terminated twice without being connected.

• Format：pw,password,sos serial number , Tele number#
• Example：pw,123456,sos1,1234#
• Reply：sos1,1324# ok!

Delete the SOS number

• Format：pw,password,sos serial number #
• Example：pw,123456,sos1#
• Reply：sos1,# ok!

Query parameters

• Format：pw,password,ts#
• Example：pw,123456,ts#

Reply：

• ver:C405_365_FA81_04R4_EU_EC0_V1.0_2022.03.30_18.10.06; / Software version
• ID:4504556936; / Device ID
• imei:861245045569364; / IMEI Number
• url:a6.gps18.com; / IP
• port:7755; / Port
• profile:1; / Internal Software Parameters
• upload:600; / Motion status upload interval 600 seconds
• batlevel:54; / Remaining battery 54%
• language:0; / Language: English
• zone:0:00; / Time Zone: 0 Time zone
• NET:OK(100); / OK Indicates that the server is connected. 100 indicates that the signal is strong
• GPS:ZKW; /ZKW means from supplier ZKW

Set ip and port (either ip+ port or domain + port)

Format：pw,password,ip,x.x.x.x,y#
Example：pw,123456,ip,54.169.10.136,8001#
Reply：surl,54.169.10.136,port,8001# ok!

Set APN

Format：pw, password,apn,APN name,user, password,MCCMNC#
Example：pw,123456,apn,cmnet,,,,#
Reply：apn:cmnet;user:;password:;userdata:.

Restart the device

Format：pw, password,reset#
Example：pw,123456,reset#
Reply：reset..

Reset the device

Format：pw, password,factory#
Example：pw,123456,factory#
Reply：factory ok,reset..

Set SMS Password（default password:123456），

Format：pw, old password,pw,new password #
Example：pw,123456,pw,654321#
Reply：pw,654321# ok!

APP Related Interface

Personal Security Information

Please install and use this product correctly. In order to ensure the safety of your products, make sure that your products are not bound by unauthorized persons. Company promises, according to the National People’s Congress standing committee “decision on strengthening the network information protection”, the standing committee of the National People’s Congress on maintaining Internet security decision “and the” Internet electronic bulletin service management regulations “and other laws and regulations, technology and management measures to ensure the safety of network information, in accordance with the law to protect users’ personal information, to ensure the security of your personal information. The company is not responsible for any illegal use of this product.

Statement

• Welcome to use this product. The product contains two parts: hardware and smartphone client software. The two parts need to be used together to realize the function of the product. Before operating the hardware, read the operation instructions and safety information in this manual to ensure safety and correct use. For details about the smartphone client software, see the introduction in the software.
• If you remove or modify the shell of the product, the product will lose the warranty.
• Please use the parts supplied by the original factory to avoid unexpected damage. If you do not follow the correct procedures to use the product or connect incompatible parts, such behavior will automatically void the warranty, and may even endanger the safety of you and others. The company does not assume any responsibility for this.
• The function of this product depends on GPS network system, GSM(GPRS) network system, GIS (geographic information) system and electronic computer system. This product needs to install a mobile phone card, and open the Internet function. The product can function normally only when the network is unobstructed. We shall not be liable for any loss caused by service interruption due to network failure or other force majeure reasons.
• In line with the principle of continuous improvement and development, the company reserves the right to modify and improve any product described in the document without prior notice.
• The contents of this Manual are provided as they were at the time of manufacture, and no warranty of any kind, express or implied, is given as to the accuracy, reliability or content of the document, unless otherwise required by applicable law.
• To the maximum extent permitted by law, in no event shall the Company or its suppliers be liable for any special, incidental, incidental or consequential loss, regardless of the cause of such loss.

Precautions

1. Do not immerse the product in liquid chemicals such as salt water, detergents, etc.;
2. Please keep the product away from extreme environments such as fire sources, high temperature and high heat;
3. Please pay attention to remind children to avoid accidental ingestion of the product;
4. Do not use unqualified charger to charge the device;
5. The positioning function does not work when the product is powered off and outside the service area.

To read the user manual in a different language, go to osmousermanual.com
Have any questions or need more assistance?
Send us an email at support@tryosmo.com and we’ll be happy to help you!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>