BIGGERFIVE BH100 Bluetooth On-Ear Headphone User Manual
- June 12, 2024
- BIGGERFIVE
Table of Contents
BIGGERFIVE BH100 Bluetooth On-Ear Headphone
Product Information
Specification Number| Version| Product Category| Product Description| Pair
Name| Product Dimension| Product Weight| Operating Temperature| Storage
Temperature
---|---|---|---|---|---|---|---|---
21BK02-20211015| V1.0| Bluetooth headset| Bluetooth on-ear headphone|
BIGGERFIVE BH100| 18316976mm| 208g| -10~+45°C| -20~+60°C
Feature / Characteristic / Materials
Bluetooth Version| V5.0
Bluetooth Profile| HFP, A2DP, HSP, AVRCP
Working Frequency| 2.402GHz-2.480GHz
Receiving Sensitivity| Class 1, Class 2
Battery Type| Not specified
Battery Capacity| Not specified
DC Input| Not specified
Headset Charging Current| Not specified
Headset Charging Time| Not specified
Product Usage Instructions
To use the Bluetooth on-ear headphone (Model: BH100), please follow these instructions:
- Make sure the headphone is charged and powered on.
- Enable Bluetooth on your device (e.g., smartphone, tablet, computer).
- Go to the Bluetooth settings on your device and search for available devices.
- Select “BIGGERFIVE BH100” from the list of available devices.
- If prompted, enter the pairing code provided with the headphone.
- Once connected, you can start using the headphone to listen to audio or make/receive calls.
- To control playback, use the buttons on the headphone (refer to the user manual for button functions).
- To charge the headphone, connect it to a power source using the provided charging cable.
- Monitor the battery level of the headphone and recharge as needed.
Chips and Photographs
Headset Specifications
Basic Description
| Specification Number | 21BK02-20211015 |
|---|---|
| Version | V1.0 |
| Product Category | Bluetooth headset |
| Product Description | Bluetooth on-ear headphone |
| Pair Name | BIGGERFIVE BH100 |
| Product dimension | 18316976mm |
| Product weight | 208g |
| Operating temperature | -10~+45℃ |
| Storage temperature | -20~+60℃ |
Feature / Characteristic / Materials
| Items | Description | Remark |
|---|
Key Performance
Bluetooth version| V5.0|
Bluetooth profile| HFP A2DP HSP AVRCP|
Working Frequency| 2.402GHz-2.480GHz|
Receiving sensitivity| <-85dBm|
class1,class2| 0dBm| Class2
Battery type| polymer lithium battery|
Battery capacity| 600 mAh| 423343 3.7V 600mAh
DC input| DC5V 1000mA|
Headset charging current| ≤370 mA|
Headset charging time| About 2.5 hours|
Quiescent current| 1uA| Test in shutdown state
---|---|---
Standby current| About 10mA|
Working current| About 28mA| The RGB light does not light up when answering
the call
Turn on bluetooth + all LED lights turn on working current| About 40mA| 70%
volume test
（Turn off LED）Music playback time| About 50 hours
（Turn on LED）Music playback time| ****
About 21 hours
Talk time| About 21 hours| | |
Standby time| About 60 hours|
Effective communication range| Forward ≤9M ，Backwards ≤8M|
Effective music range| Forward ≤10M ,Backwards ≥9M|
Waterproofing grade| No|
Controlling button| 4|
Cushion
(PU/PVC)Cushion covering (Leather (Suede / Sheep Skin) / Protein leather
(Japan / Korea / China) / imitation protein leather / Normal PU (Poly
Urethane) / Thin PU / PVC /PU/PVC)| PVC|
Cushion assembly method (High Frequency / Sewing / Adhesive)| Sewing|
Cushion/Padding Material| Sponge|
Tear Strength| |
How Attached (Friction, Twist Off, Sewn, Snap on| |
omments| |
Headband
headband materials| PC+ABS|
Headband cushion covering| PVC|
Headband padding/cushion| Sponge|
Swivel Ear Cups| |
Clamping force (R-L)| |
Length of the adjust rail| 31MM|
Headband adjust force| |
Comments| |
Driver/Speaker
Driver Diameter| DLBR-30FE19-010|
Magnet Type|
---|---
Type of speaker driver (Dynamic / Balanced armature / Planar Magnetic| Dynamic
Speaker driver quantities / per channel| 1
Magnetization intensity| 2200GS
PET / PEN / PEI / PI / LCP / PEEK / PC / PPS / PAR| PET
4µ/5µ/6µ/7µ-ibrating diaphragm thickness|
Voice coil (CCAW (Copper Clad Aluminum Wire) / OFC (Oxygen Free Cooper))| OFC
Speaker type| DLBR-30FE19-010
Impedance| 32Ω
Sound pressure level| 91dB
Sound pressure level| 81dB
THD Graph| TBD
L-R Tracking| +/-3dB
Distortion| ≦5%
Rated input power| 20mW
Maximum input power| 100mw
Powered Features
| NFC | / |
|---|---|
| Internal Amplifier Power(Wrms) | TBD |
| Active Noise Reduction Frequency Response Hz | TBD |
| Max Noise Reduction Level(dB) | TBD |
| Sound-Control Circuit to cap peak volume levels at 85dB | TBD |
| Power Input Connector | TBD |
Accessory
Micro USB Charging Cable
Microphone Cable
3.5MM Audio Cable
Travel Adapter
Extra Cushions
Battery
Carry Case/Pouch
Comments
Change Notes
| Regulatory and Certification | As Stated |
|---|---|
| Engineering Change Notice | |
| Date Code |
Reliability Requirement
| Connector insertion test | 100 cycles minimum |
|---|---|
| Cable Strain Relief Bending | 200g; +/-90 degree; 1500 cycles; 30 cycles per |
minute
---|---
Cable Pull Testing| 10 lb
Other|
Product Operation Guide
No| Function| Operation| tone| LED status|
Remark
---|---|---|---|---|---
1| Powering on| Turn the switch to the ON position for power-on| Power on| The
blue light flashes 3 times|
| | | | |
3| pairing| Automatically enter pairing mode| Pairing| Red and blue lights
flicker alternately| In the absence of paired information
4| Power off| Turn the switch to the OFF position for shutdown| Power off| The
red light flashes three times|
5| connected| The phone turns on bluetooth and searches for a pairing called
to click connect| connected| Blue LED flashing， Flashes once every 5 seconds|
6| Disconnected| Manually click to disconnect the bluetooth connection from
the phone| Disconnecte d| Red and blue lights flicker alternately|
7
| ****
Automatic link back
| Users do not need to pair the paired headphones. After booting, the
headphones can automatically connect back to the last connected cell phone.|
connected| The blue light flashes quickly, after reconnecting successfully,
the blue light flashes once for 5S|
8| Call reminder| /| | Blue LED flashing， Flashes once every 5 seconds|
9| Answer calls| Press the PLAY button once| /|
10| On Calling| /| |
11| Call End| Press the PLAY button once| /|
12| Call Rejected| Long press PLAY button 2s and release| Call Rejected|
13| Last number redial| Double-click the PLAY button| /|
14| Cancel dialing| Press the PLAY button once| /| |
---|---|---|---|---|---
15| Speech switching| Long press PLAY button 2s| /| Blue LED flashing， Flashes
once every 2 seconds|
16| Volume +| Click the volume + button| ****
Maximum volume
| The blue light flashes once in 5seconds|
17| Volume –| Click the volume – button| minimum volume|
18| Previous track| Long press volume – 2S| /|
19
| ****
Next track
| ****
Long press volume + 2S
| /|
20| Play/Pause music| Press the PLAY button once| /|
23| RGB light control key| 1. Press the MODE button to turn on the RGB light
2. Press the MODE button to turn off the RGB light
| | | Connect bluetooth playing state with music amplitude flashing light
| | | Breathe flash while Line IN External Music
24| Audio switch EQ1| Long press the MODE control key for the first time to
switch| TONE| /|
25
| ****
Audio switch to EQ2
| ****
Long press the MODE control key again to switch 95dB
| ****
TONE
| /|
26| SIRI| Long press PLAY 1S and release| /| /|
27| Low battery| When the battery voltage is drop to (3.3V)| Battery low| Red
LED flash once in 5 seconds| The prompt sound is reported every minute.
| | After plugging in the 3.5mm| | | If you are in the
| | stereo audio cable, you can play| | RGB three primary| power-on state,
| | the songs of the external LINE| /| color light breathing| inserting LINE
IN
28| LINE IN| IN.| | flash| will disconnect
| | | | | the bluetooth
| | | | | without shutting
| | | | | down.
29| Clear Pair Information| In the pairing state, press the LED control key
+VOL- at the same time| /| The red and blue indicators are on for 1S at the
same time
---|---|---|---|---
30| DUT MODE| In the pair state, press PP and VOL- at the same time| /| Red
and blue lights go on simultaneously
31| Charging| Insert the Micro USB charging cable into the charging port to
realize charging. The headset will not be turned off at this| /| ****
Red LED is lit
32| Fully charged| /| /| The red light out
Trouble Shooting and Common Situations
| No | Common Situations | Trouble Shooting |
|---|---|---|
| 1 | Earphone/Headphone cannot power on | Battery drain, please charge the device |
for 30 minutes, and then powering on.
2| Smart phone cannot search Bluetooth Earphone /Headphone| 1. Make sure the
Earphone/Headphone is in pairing mode ( red and blue LED flashingalternately)
2. Delete pairing list in smart phone and searching Earphone/Headphone again.
3. If it still cannot be found, please restart smart phone and Earphone/Headphone again.
3| Earphone/Headphone will be disconnected from time to time| 1. The battery drain.
2. The Earphone/Headphone is beyond the communication range(10m)
4| No sound on talking mode| 1. Confirmed the Earphone/Headphone connected to earpiece mode on talking.
2. Try to volume up Earphones/Headphone or smart phone.
3. Smart phone is not via Bluetooth mode.
4. Do not open Smart phone voice.
5| No sound with music playing| 1. Try to volume up Earphones or smart phone.
2. Earphone/Headphone disconnected with smart phone，please reconnected again.
6| Cannot charger for Earphones/Headphone| 1. The charger cable connected not well.
2. Charger line was damaged.