PANGEA AUDIO 325MEGA4PK Mega Sorbothane Feet Instructions
- June 9, 2024
- PANGEA AUDIO
Table of Contents
Mega Sorbothane Feet
Sorbothane is one amazing material. NASA used it to isolate high-speed cameras during Space Shuttle launches. Our National Park Service used it to protect the Liberty Bell from street vibrations. And professional athletes use it in their shoes to protect their bones and joints.
Pangea Audio Mega Feet have been carefully designed to enhance the performance of power amps, receivers, power conditioners, and other heavier components. They isolate components from performance degrading mechanical vibrations inside the components and outside in the room.
One set of four Mega Feet is designed for gear weighing 40-80 lbs. For heavier gear, simply add more Mega Feet.
Recommended Use
For best results, place the bottom of the foot directly under the bottom of the component’s chassis with the “‘P” on top of the foot facing downward. Avoid placing the foot under a component’s own feet. Do not apply more than the recommended weight. Do not apply excessive heat. Do not use in direct sunlight. Do not place the foot directly on fine wood or other finishes, rather, place the supplied plastic discs under the feet to protect the surface.
Guarantee
Pangea Mega Feet are guaranteed to be free from manufacturing defects for a period of one year from their retail purchase date. This guarantee is void if the feet are damaged, marred or not used as recommended.
Care
Clean the feet by hand with lukewarm tap water and allow to air dry.
Mega Sorbothane Feet
Set of 4 supports up to 80 lbs
Distributed by WS Distributing, LLC – wsdistributing.com