BIGGERFIVE ID115U Fitness Tracker User Guide

BIGGERFIVE ID115U Fitness Tracker

Working Conditions for Mobile

Note : hardware and system of the devices should meet the requirements

If the device doesn’t work well with IOS13, please do as follow steps on your phone:
1. Open the bluetooth option,and find the device name;
2. Click the device name and you will see the optionftShare system notification”, please switch it on.

Quick Start Guide

Device Active & Charge
The product must be activated by charging before initial use. Please find the USB charge port as below photo shows, and insert it to a normal DC port (5V- 500mA) to charge.

Note: When it is charging, it will show a red light and a battery symbol on the display. If it doesn’t show the red light, please flip over the USB charging port to the right direction.

Touch key:
Single click the touch key: interface switch Press and hold the touch key : Enter

Download VeryFltPro APP
Download method 1 : Scan below QR code and download .
In case there is any problem to open the link, please try to copy the link and open it by browser.
Download method 2 :Search and download the “VeryFitPro” from App store or Google play store.

Pair the device
Please make sure the Bluetooth of the smartphone is ON , and open the “VeryFitPro” APP. The APP will search the device automatically, choose the correct device name and confirm to bind the device.

Know Your Device

Once the device is connected to the app successfully,it will record and analyze your activities and sleep automatically. Tap the touch key,the interface will be toggled.

Nonnal mode interface

Note : Alarm mode and find phone mode will only be displayed on the fitness watch after you switch on the 2 functions on the VeryfitPro app.

Remote Camera Shoot Mode interface

Open the VeryFitProAPP, find the interface “Device”,Click “Camera shooting”, then click the key on the fitness watch and shoot a picture.

Sport Mode interface

Notification Mode

The incoming call notifies, alarming notify, sedentary notify and message notify will only work when you switch on the corresponding functions in the VeryFitPro APP.

Functions Instruction

• Activities record:
  Record daily activities,you could check daily activities including steps, distance and calories consumption in app;

• Sleep monitor:
  The device could automatically recognize your state and monitor the whole sleep process with analyzing the deep sleep and light sleep hours.

• Notification Alerts:
  Alarm alert, call alert, sedentary alert, etc. by silent vibration

• Anti-lost:
  When the smartphone is beyond the Bluetooth range(Sm), the device vibrates to remind.

• Remote Camera control:
  Operation on the screen could control remote photograph shooting

• Device data storage:
  The activity data will be cleared every 0:00 am as a cycle, but the device itself could restore 7 days’ data, after 7 days,the data will be cleared. We suggest user to sync data with the app at least one time within 7 days during use.

Wearing and Maintenance

Our products are designed for wearing throughout the day,so please follow a few brief instructions when you are wearing and maintaining your smart devices. To keep your wristband clean and your skin comfortable,we put forward the following tips:

• Regularly clean your wrist and the smart wrist band , especially after sweating may attach on the internal side of the wristband
• Do not wash the wristband with a household cleanser. Please use soap-less detergent,rinse thoroughly and wipe with a piece of soft towel or napkin
• For spots or stains that are not easy to remove.scrub with alcohol and then follow the above steps.

FAQ

• How to remove straps?
  Please pull parallel the straps and do not bend down or up and pull. Removing straps may be hard at the beginning, but it will be easier in later using.

• The device doesn’t charge, is it defective?
  If your device doesn’t charge, please check if you charge it in the correct way by following the steps:

  • Find the charging USB port( should be the side with a built-in golden chip).
  • Please put the built-in USB charging plug (where the white oval icon and the metal strips are located) into a standard USB port. When it is charging, the red indicator light comes on.
  • If the red indicator is not shown when charging, please flip it over; turn the device’s charging plug to the opposite direction.

• Why the fitness tracker cannot be connected with your smartphone?

  • Make sure the watch is fully charged and close to your phone, the Bluetooth of your phone has been turned on;
  • Please install the latest version of the “VeryFitPro” APP, set to trust this app, and turn on the function that app auto-launch if you have the option when install the app. Please allow all the requirements of the app;
  • Please turn on the GPS function on your phone if there is a reminder when pairing;
  • Enter into the page of the app, please swipe the screen, until it shows the page “Add Device” ;
  • Find the name of your fitness tracker; and select it to confirm bind device.
    Note: Some smartphones have the access restriction, please enter into the •Permissions” of your phone’s setting, and find the VeryFitPro application, then set it as a trusted app.

• Why the fitness tracker always reset?
  Please note that the fitness tracker will reset under the following situations:

  • The watch time will reset when a new day begins(00:00 AM);
  • The bracelet will be off automatically if there is no power;and it will be on once you put it to charge, then the time will reset to
    00:00 again. So you need to connect the watch with your phone again to sync the time.

• Why the step counting is not accurate?
  The step counter is implemented through a Three-axis Sensor, it records steps according to your displacement and wrist shaking. The following situations may cause the inaccurate steps counting:

  • Continuous walking is less than 30 steps: To reduce the step counting errors like the wrist shaking when you are not walking, the steps will go back itself automatically if your continuous walking is less than 30 steps.
  • The steps counting is related to your age, sex, height and weight etc. So before initial use, please go to the ”VeryFitPro” app to set your personal information.
  • The steps will reset to zero when a new day comes (00:00 AM), so please make sure the time of the bracelet is correct.

Basic Specifications

• Model Number: ID115U
• CPU: Nordic
• Sensor: Kionix
• Host Weight: 17g
• Battery Type: Polymer Rechargeable Li battery
• Battery Capacity : 45mah
• Data Sync: Bluetooth 4.0
• Working Temperature: -20 – 40
• Dust-proof and waterproof level : IP67
• Standby: Up to 7 days
• Frequency bands: 2402-2480MHZ
• Maximum output power : 0.57dBm
• IC: 28916-BF200

This product is applied with a professional Bluetooth RF signal and a self- developed algorithm, the accuracy of step pedometer could be up to 95%.

FCC

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.
   Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These Limits are designed to provide reasonable protection against harmful interference radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION
RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT DISPOSAL OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Correct disposal of this product. This marking indicates that this product should be disposed other household wastes throughout the EU. To prevent possible harm to the environment or humans he from uncontrolled waste disposal. Recyclable responsibly promotes the sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

IC Warning
This device contains licence-exempt transmitter(s)/receivers) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

For FAQs and more information, please visit: support.biggerfive.com

VeryFi!Pro
Scan here to download APP

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>