LEDVANCE AP721402-01 Power Bank Earphones Molik User Manual
- June 12, 2024
- LEDVANCE
Table of Contents
AP721402-01 Power Bank Earphones Molik power bank
AP721402-01_POWer Bank Earphones Molik User manual
It is recommended to read this user manual carefully and keep it for future reference.
Product overview:
Important Safety Precautions:
Before use please note the following safety precautions. Failure to comply may
be dangerous and cause damage to your mobile electronic devices.
– The power bank unit contains an internal 5200mAh polymer lithium battery.
Upon initial use or after a prolonged period of storage, fully charge the
unit. The unit will reach its maximum performance after 2 or 3 full charging
and discharging cycles.
– Using an incorrect power adaptor or USB cable could cause damage to both
your mobile devices and the Power Bank.
– Do not submerge in water or expose to adverse weather conditions.
– Avoid dropping the device.
– Keep the device away from fire and high temperatures.
– Keep the device out of reach of children.
– Do not dismantle, repair or modify this product by yourself, contact an
authorized specialist.
– In order to avoid any risk, do not dispose of this product inappropriately
or throw it into the fire as there is a built-in Lithium battery.
– Clean it with a dry cloth.
– Do not insert any metal objects into this device as there is a risk of
causing a short circuit in the unit.
– Excessive sound pressure from earphones and headphones can cause hearing
loss.
Specifications:
- Bluetooth Version 5.0
- Frequency: 2402-2480MHz
- Earphones: Lithium polymer battery 3SmAh
- Charging voltage: 5V
- Working Time: 2h
- Charging Time: : 2h
- SNR: 90dB
- Frequency response: 20Hz – 20KHz
- Impedance: 32ohms
- Distortion: less than 1%
- Compatible with A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3
- Charging cable included
- Capacity: 5200mAh / 3.7V – Lithium Polymer Battery.
- Input. 5V ****2k
- Output. 5V ****2A.
- Battery Life: More than 500 charging cycles.
- Charge indicator: 4 LEDs
- Wireless charge indicator: 1 LED
Wireless charge: Suitable for all mobile devices with Qi technology.
Charging:
Power Bank
Connect USB cable to computer / AC adapter and connect the other end of the
cable into the charging port of the charging station. During the charging
process of the power bank, the blue indicators light will start to flash. As
the charging process is completing the lights will start to remain solid.
Note: If the earphones are in the charging station, both will be charge
at the same time.
Earphones
Place the earphones into the charging station. During charging the indicator
light of the earphones will turn red. When the earphones are fully charged the
indicator light will turn off.
Power Bank operation:
Connect the USB cable to the mobile device and connect the other end of the USB cable to the (out) port of the portable charger. When a mobile device is connected to the power bank the indicator lights will appear, according to the charge level available on the unit. During the charge transmission, the power of the portable charging device will decrease and the lights on the charge indicator will start to disappear indicating the remaining charge capacity available. Every light represents 25% of the total charge.
Wireless Charge operation:
To use the Wireless chargter, press the ON/OFF button and place your Qi
compatible device on top of the wireless charger, ensuring that it is
centrally positioned.
When it is charging correctly a red light indicator will light up.
Note: If your phone has a protective case you may need to remove it for a
sucessful connection. Cable and wireless charging can be used at the same
time.
Earphones operation : You can use one or both earphones at the same time.
Simple synchronization Hold the multifunction button to power on the earphone
until the red and blue indicator light starts flashing.
This indicates that the device is ready to be paired. From the Bluetooth menu
of your device, search for new devices and select “6302”to pair. Once they are
paired successfully, the light indicator will turn off.
Controls:
Answer/End call: Short press the multifunction button.
Reject call: Long press the multifunction button.
Play/Pause music: Short press the multifunction button.
Next Track: Press the multifunction button twice consecutively.
Double synchronization
Note: Only for the first connection. For future connections, the
earphones will be synchronized automatically. Hold the multifunction button to
power on both earphones at the same time until the blue and red indicator
light starts flashing.This indicates that the devices are ready to be paired.
Press twice the multifunction button on one of the earphones to enter
synchronization mode.
Once synchronized, the red and blue indicator light on the right earphone will
continue flashing, while on the other earphone, the indicator light in blue
colour will flash every 5 seconds. This indicates that both earphones have
been synchronized correctly. From the Bluetooth menu of your device, search
for new devices and select “6302”to pair. Once they are paired successfully,
the blue light indicator will turn off on both earphones.
Hold the multifunction button, on any of the earphones to power off the
device.
Controls: Answer/End call: Short press the multifunction button of any
earphone. Reject call: Long press the multifunction button of any earphone.
Play/Pause music: Short press the multifunction button of any earphone.
Next/Previous Track: Press the multifunction button twice on the left earbud
to previous track.
Press the multifunction button twice on the right earbud to go to next track.
Note: The volume must be adjusted from your mobile device.
Troubleshooting:
| Fault | Solution |
|---|---|
| Unable to pair up with other devices. | 1.Check whether the earphone is still |
on the process of search or switch it off and on again.
2.There are too many Bluetooth devices in the proximity that cause difficulty
in connection. Turn off other Bluetooth devices.
3.Make sure your earphone is in “Pairing Mode.
The sound is low or distorted.| 4.Check the Bluetooth device’s volume and then
adjust it to an appropriate level.
5.Recharge the battery.
Occasionally the music stops.| 6.Check whether the earphone effective
transmission range is exceeded or if there is an obstacle standing between the
earphone and other Bluetooth devices.
**** MADE IN PRC
This symbol both in the product and its user manual indicates that at the end
of the devices electrical life, it should be recycled separately from your
household waste. There are adequate means to dispose of this material for
proper recycling. For more information, contact your local authorities.
Distributor. Cool Collection. 1476, Budapest, P013:176. Hungary Registration nr.: 01.09-276783, Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>