FOSCAM DBW5 Video Doorbell User Manual

FOSCAM DBW5 Video Doorbell

Overview

Key Features

• 4.0 Megapixels Resolution, support HDR
• Supports WPA and WPA2 Encryption
• Support full duplex 2-way Audio
• Ultra wide Angle lens, diagonal Angle up to 170°
• Supports AI algorithm (Face recognition)
• Support 2.4GHz & 5GHz dual-band WiFi
• Supports image snapshot
• Supports dual-stream
• Built-in High efficiency IR LED, has excellent night vision image
• Supports remote viewing & record from anywhere anytime
• Multi-level users management with password protection
• Supports multiple network protocols: IP、TCP、UDP、FTP、DHCP、RTSP、
• Providing Video Management Software to manage or monitor multi-cameras
• Supports sound detection
• Supports Alexa
• Supports Google Home
• Complete mounting bracket and kit are available
• Supports 256G Micro SD Card Storage(External)

Read before Use
Please first verify that all contents received are complete according to the Package Contents listed below. Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Setup Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly as intended.

Packing Contents

Physical Description

Front Panel
Rear Panel

• Camera: Ultra wide Angle lens
• Microphone: Built-in Microphone.
• Reset: Press and hold on the reset button for 10 seconds. Releasing the reset button, the password will back to the factory default administrator password.
• Micro SD Card slot: Supports up to 128GB SD card for storing the video.
• Power Input Port: AC wiring interface.
• Type-C Port: Use with C-type cable and 5V DC power distribution network.
• Speaker: Built-in speaker
• Security screw hole: Used to install anti-theft screws to prevent the doorbell from being stolen.

SD Card Management
This camera supports Micro SD Card. When you plug in the SD card during the camera work process, please reboot the camera again, or else the SD card might not work well. On Foscam app go to the Settings RIGHT Device Status RIGHT Device Status page, you can see the SD card status.

Add Device: Connection via the Foscam App
Scan the QR code below to download and install the Foscam APP.

Please refer to the Quick Setup Guide. It is strongly recommended that you complete the “add devices” process on the Foscam app before the doorbell hardware is installed. You can scan the following QR code to watch the added video

Installation

Please refer to the Quick Setup Guide.
Note: Make sure you have installed the Foscam App, and have scanned the doorbell QR code and completed the “add device” process in the app before beginning the hardware installation process. You can scan the QR code below to search and watch the power kit installation video.

Default Parameters

Default network parameters

• IP address: obtain dynamically
• Subnet mask: obtain dynamically
• Gateway: obtain dynamically

Specification

Image Sensor

| Sensor Type| High Definition Color CMOS Sensor
Display Resolution| 4.0Megapixels(2560*1440)
Min. Illumination| 0 Lux (With IR Illuminator)
Lens| Lens Type| f.1.9mm ;F2.0
Angle of view| Diagonal: 170°, Horizontal: 152°, Vertical: 81°

Video

| Image Compression| H.264+/H.264
Image Frame Rate| Max 25fps (2K)
Resolution| 2K(2560*1440) 25fps,1080P(1920×1080) 25fps,720P(1280 x 720)
Stream| Dual stream
HDR| Support HDR
Flip Image| Flip and mirror
Infrared Mode| 1pcs 850nm SMD IR-LEDs
Night Mode| Manual and automatic modes
Night Visibility| 5m
Audio| Input/Output| Build-in mic and speaker,support full duplex 2-way Audio
 | Audio Compression| AAC
---|---|---

Network

| Ethernet| Transfer via USB type C to RJ45
Wireless Standard| 2.4GHz&5GHz,IEEE802.11b/g/n/ac
Wireless Security| WPA, WPA2
Remote Access| P2P
Wifi configuration Mode| Support scan QR code , sound wave to add camera
Network Protocol| IP, TCP, UDP, SMTP, FTP, RTSP, DHCP
System Requirements| ****

Operating System

| Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android

(Foscam app), iOS (Foscam app)

Other Features

| Motion Detection| Alarm via E-Mail, FTP and Foscam app when an event is detected
Sound Detection| Alarm via E-Mail, FTP and Foscam app when an event is detected
Face Detection| Alarm via E-Mail, FTP and Foscam app when an event is detected
Face Recognition| Face recognition of max 20 persons(support only with Foscam Cloud)
Privacy Block| Yes
Custom Ringtones| Support to customize exclusive ringtones through mobile APP
HDR| Improve image clarity in complex scenario
Zoom| 6X digital zoom function

Storage

| Support max. 256GB Micro SD card, local and FTP storage,Foscam cloud

storage

Visitors Leave a message| Support the push of guest messages to the APP
Power| Power Supply| AC8~24V/USB C 5V/ DC12~30V
Power Consumption| 8 Watts (Max.)
Physical| Dimension(LxWxH)| 115(L)x45 (W)x25 (H) mm
Net Weight| 125g

Accessories

| Power Kit| 1pcs(work with existing electronic chime )
Leveler| 1pcs(Pre-install the Leveler on the mounting plate)
Mounting Bracket| Flat Mounting Plate2pcs,Horizontal Wedge1pcs,Vertical Wedge1pcs
Connector| U-type Connector1pcs,Fork Connector*1pcs
Doorbell Wire Extenders

and Nuts

| With 1pcs extra screw for backup (for AC power of Doorbell), pre-install 2

Wire Extenders on the Doorbell body

L-shape Screwdriver| 1pcs
Screws| Wall Mount Screws1sets,Anti-theft Screws2pcs

Environment

| Waterproof| IP65
Operating Temperature| -20°C~ 50°C  (-4°F ~ 122°F)
Operating Humidity| 20% ~ 85% non-condensing
Storage Temperature| -20°C ~ 60°C (-4°F ~ 140°F)
Storage Humidity| 0% ~ 90% non-condensing
Certification| CE, FCC, RoHS,WEEE

For other parts, please refer to the “FOSCAM Camera User Manual”
Model: VD1/DBW5

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>