Lenco SPR-070 Bluetooth Speaker User Manual
- June 4, 2024
- Lenco
Table of Contents
Lenco SPR-070 Bluetooth Speaker
CAUTION:
Usage of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
-
Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.
-
Install in accordance with the supplied user manual.
-
Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.
-
Avoid using the device near strong magnetic fields.
-
Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.
-
Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
-
Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
-
The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
-
Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.
-
Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
-
This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
-
Keep away from animals. Some animals enjoy biting on power cords.
-
To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids.
To remove severe stains, you may use a damp cloth with dilute detergent. -
The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
-
Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.
-
If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause interference resulting in failing of data.
-
The rating label has been marked on the bottom or back panel of the device.
-
This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
-
This product is intended for non professional use only and not for commercial or industrial use.
-
Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
-
Never remove the casing of this device.
-
Never place this device on other electrical equipment.
-
Do not allow children access to plastic bags.
-
Only use attachments/accessories specified by the manufacturer.
-
Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.
-
If the product is delivered with power cable or AC power adaptor:
- If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
- Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
- Unplug this device during lightning storms or when unused for a long period.
- The socket outlet must be installed near the equipment and must be easily accessible.
- Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
- Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
- Devices with class 2 construction do not require a earthed connection.
- Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
- Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
-
If the product contains or is delivered with a remote control containing coin/cell batteries: Warning:
-
“Do not ingest battery, Chemical Burn Hazard” or equivalent working.
-
[The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just
2 hours and can lead to death. -
Keep new and used batteries away from children.
-
If the battery compartment does not close securely, stop using the product and keep it away from children.
-
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
-
-
Caution about the use of Batteries:
- Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
- Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
- Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- Attention should be drawn to the environmental aspects of battery disposal.
INSTALLATION
-
Unpack all parts and remove protective material.
-
Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.
-
Those instruction are related only to products using power cable or AC power adaptor.
FEATURES:
- 2.0CH portable Bluetooth waterproof speaker
- Water resistant IPX5, splash-proof, rainproof, Perfect for beach, poolside, boat and more outdoor activities;
- Dedicated button for TWS function, achieve true wireless Bluetooth playing with double enhanced stereo sound;
- With A2DP Bluetooth, wireless stream music from any Bluetooth-enabled device such as your mobile phone, notebook, iPhone or iPad
- Bluetooth operating range 10 meters;
- With USB and Micro SD card supporting;
- With FM radio
- With Line-in function, suitable for PC, MID, TV and other audio devices;
- Built-in lithium rechargeable battery 3000mAh
- With handle, easy to take out.
Accessories:
Controls:
- 1Micro SD slot
- USB Port
- AUX Input
- Battery Indicator
- Backward/Volume down
- Forward/Volume Up
- Play/Pause
- Mode (Switch Bluetooth, USB disk, Micro SD, FM and AUX-IN)
- TWS On/Off
- Power On/Off
- Micro USB charging port
- Charging LED
Bluetooth:
- Switch on the unit by long pressing the power On/Off button (10). The button will light up in blue. A message “the Bluetooth device is ready to pair” will sound.
- Activate the Bluetooth of your mobile phone and scan for Bluetooth devices, select the device named “Lenco SPR-070” and connect to it. If the connection is successfully made, the blue power button light will stop flashing and you will hear “the Bluetooth Device is Connected Successfully”.
- Now you can play music from your mobile phone/tablet/computer
- Long press the + (6) or – (5) button on the device to change to another music track.
- Press the Play/Pause button (7) on the device to Play/Pause the music.
- Short press the + (6) or – (5) button to adjust the volume up and down. (Or adjust the mobile phones’ volume).
“This product has a Bluetooth reception function, you can’t transmit any Bluetooth sound with it: this means that you can receive a Bluetooth sound signal from an external source like a smartphone.”
Playing music from Micro SD (TF) memory card or USB memory stick
- Long press the Power button (10) to switch the unit on (if not already on).
- Insert a Micro SD (TF) card (1) or USB memory stick (2) on the back of the unit. The speaker will say “SD card” when a micro SD card is inserted or “USB” when a USB memory stick is inserted. The music will start automatically.
- When playing music, long press the + (6) or – (5) button to go to the next/previous song. Short press the + (6) or – (5) button to adjust the volume up or down.
- Press Play/Pause (7) to play/pause the current music track.
NOTE: if a SD (TF) CARD or USB memory stick is inserted when Bluetooth mode is active and playing music, Bluetooth mode will exit and switches to the USB or Micro SD card play mode. You can press the MODE button (8) to switch back to Bluetooth mode again.
FM Radio:
- Multiple Press the mode button (8) until you hear “Radio mode”.
- Now you can long press the Play/Pause button (7) to start an automatic channel search with automatic store.
- When the automatic search is done, you can switch the found channels by pressing the + (6) or – (5) buttons.
Note: if your favorite radio station can’t be received or reception is
with noise
You can rotate the SPR-070 unit to change the reception quality. (The SPR-070
has an internal antenna). You can also use the supplied 3.5mm jack cable as an
extra antenna. Insert it into the aux port and alter the cable position for
better reception.
TWS (True Wireless Stereo) Function:
With the TWS function you can combine 2 identical SPR-070 speakers as a
wireless stereo speaker set.
To do this:
- Turn on the two Lenco SPR-070 speakers which you want to setup. Both have to be in Bluetooth mode.
- Press the “TWS” button (9) on one unit. The speaker will make a “di” tone when it starts pairing. It will make a “di” sound 3 times when pairing was successful.(The TWS buttons on both devices will light continuously)
- Make a Bluetooth connection with your mobile phone/tablet/computer (if not already made) to play music through the TWS paired Speakers.
- When you want to exit the TWS mode, press the “TWS” button (9) on one of the units again to exit the TWS function. The TWS light will go out.
NOTE: the TWS function can only be used in Bluetooth mode.
AUX-IN:
For other music devices or MP3/MP4 players with a 3.5mm jack connection, use the supplied audio line cable (3.5mm jack) to connect from the device’s “Line Out” or “Headphone” to the “Aux In” of this device, the speaker will prompt “Auxiliary”. When using an external device, all functions can be controlled by the external device.
Remarks:
- When the Lenco SPR-070 has a Bluetooth connection with your mobile phone, there will be a battery icon on your connected mobile phone/tablet showing the speakers battery charge.
- Press the MODE button to switch the different modes, the order is Bluetooth, USB disk, Micro SD, FM radio and AUX-IN.
- User can long press the TWS button to disconnect the previous connected Bluetooth device and enter Bluetooth pairing mode.
- Default volume is at 50% status of max volume;
- Long press the Mode button (8) to turn the RGB LED lights on/off;
- Turn off the device when not in use to save battery life.
Charging the battery
- A mains charger is not included in the package. Please use a universal 5V/1A micro USB charger to charge this device. (Lenco can’t be held responsible for any damage caused by using a wrong type of charger)
- Power off the unit, put the included micro usb charge cable into the charge slot of the unit, connect the other end to a usb charger with 5V/1A output (or use a usb port of a computer, but charging will take longer)
- Charge time will be ~4-6 hours. The red led is on while charging and will turn off when the battery is fully charged.
- The 4 white LEDs on front left (4) show the battery remaining power. If the battery power is low, the red charging led, next to the micro USB connector on
the back panel, will start to flash and a message “low battery” will be hearable. Please charge the battery.
SPECIFICATIONS:
- Bluetooth version: 5.0
- Speaker size: 3 inch x 2
- Music output: 2 x 12W RMS
- Battery Capacity: 7.4V 3000mAh
- Frequency Response: 100Hz-16KHz
- Playtime battery: up to 15 hours at 30% of volume
- Product size: 354 (L) x 138 (W) x 183 (H)mm
Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.
Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).
CE Marking
Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands,
declares that this product is in compliance with the essential EU directive
requirements.
The declaration of conformity may be consulted via
[email protected]
Service
For more information and helpdesk support, please visit
www.lenco.com Lenco Benelux BV, Thermiekstraat 1a,
6361 HB, The Netherlands.