Lenco TFT-1038 Portable DVB-T2 TV User Manual

Lenco TFT-1038 Portable DVB-T2 TV

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in This unit should not be adjusted or repaired by anyone except qualified service personnel.

PRECAUTIONS BEFORE USE KEEP

THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.
2. Clean only with a slightly damp cloth.
3. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2″) 1. 2. 3. free space around the whole device.
4. Install in accordance with the supplied user manual.
5. *Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the heavy items on the power adaptor, which may damage it. Keep the emit device out of children’s reach! When playing with the power cable, they can seriously injure themselves. cable’s exit pair Do nonplace
6. • Unplug this device during lightning storms or when unused for a long period.
7. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other 6. 7. heat-generating products or naked flame,
8. Avoid using the device near strong magnetic fields.
9. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operating static-free environment.
10. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
12. Do not use this device when condensation may occur.
13. Although this device is manufactured with the utmost care and checked several times before leaving Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools. Do not use this device when condensation may occur. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
14. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
15. *The socket outlet must be installed near the equipment and must be easily accessible.
16. • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
17. • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
18. • Devices With class 2 construction do not require a earthed connection.
19. Keep away from rodents. Rodents enjoy biting on power cords.
20. • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord.  This can cause a short circuit.
21. Avoid placing the device on any surfaces that may be subject to vibrations or shocks.
22. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.
23. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
24. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be Corrupted or lost.
25. If the unit has USB playback function, the usb memory stick should be plugged into the unit directly. Don’t use anusb extension cable because it can cause interference resulting in failing of data.
26. The apparatus shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
27. *TO Completely disconnect the power input, the mains plug of the apparatus shall be disconnected from the mains, as the disconnect device is the mains plug of apparatus.
28. If the unit works with battery, Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
29. Attention should be drawn to the environmental aspects of battery disposal.
30. The apparatus can only be used in moderate extremely cold or climates warm environments should be avoided.
31. The rating label has been marked on the bottom or back panel of the apparatus.
32. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
33. This product is intended for non professional use only and not for commercial or industrial use.
34. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
35. Never remove the casing of this apparatus.
36. Never place this apparatus on other electrical equipment.
37. Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration.
38. Do not allow children access to plastic bags.
39. Only use attachments/accessories specified by the manufacturer.
40. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the apparatus, when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
41. *Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
42. Prolonged exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

INSTALLATION

• Unpack all parts and remove protective material.
• *Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

*Those instruction are related only to products using power cable or AC power adaptor.

Warning :

• Use only the power supply listed in the user instructions.
• Power supply adaptor
• Manufacturer: Shenzhen Mass Power Electronics Limited
• Model number: EFF0900150E1B A
• Adapter type: VDE
• Use only original AC adaptor

Identification of Controls

Main Uni

1. SOURC E
2. SETUP
3. OK
4. UP
5. DOWN
6. LEFT/VOL-
7. RIGHT/VOL+
8. AV OUT
9. AV IN
10. Earphone Socket
11. ON/OFF
12. DC IN 9-12V
13. ANT.
14. HDMI OUT
15. USB

Identification of Controls

1. POWER
   On/Standby

2. VOL ‐
   Adjust VOLUME.

3. 0‐9 NUMBER BUTTON
   Selects numbered items in a menu.

4. SUBTITLE
   Press SUBTITLE repeatedly during playback to a different subtitle languages, if available.

5. ZOOM
   JPEG: Use ZOOM to enlarge or shrink the picture. Each press of the ZOOM button change the TV screen

6. OK
   Confirm and Enter

7. SETUP
   Main Menu/Return

8. FAV
   Open Favorite Programs List Menu

9. TV/RADIO
   Switch between TV and Radio source

10. EXIT

11. DISPLAY
    Display the information of the current signal

12. SOURCE
    DVB/AV IN

13. VOL +
    Adjust VOLUME.

14. REPEAT
    Repeat Play mp3 and video

15. MUTE
    Mute the sound

16. AUDIO
    Press AUDIO repeatedly during play backstop hear a different audio language or audio track, if available.

17. MODE
    Mode: Picture menu setting

18. STOP

19. PLAY/PAUSE

20. RETURN

21. BUTTON
    Previous option.

22. BUTTON
    Next option.

23. BUTTON
    Fast forward

24. BUTTON
    Fast backward

25. RED/GREEN
    Some specific function

MMODE MENNU SETTINGG

PPICTURE

• Brightness
  Set the brightness of the screen.

• Contrast Set the
  Contrast of the screen.

• Color
  Set the colors of the screen.

• ENGLISH
  Set the OSD Language

• RESET
  Reset to default setting.

OPTION

STANDBY

• This function makes it possible to automatically put the device into standby mode
• 3 or 4 hours. 3H(3 hours): The device will automatically go into standby mode after3 hours have passed from the time that any button was pressed.
• 4H (4 hours): The device will automatically go into standby mode after4 hours have passed from the time that any button was pressed.
• OFF (Off): The automatic standby function will be deactivated
  

Machine model and soft version

First Time Installation

After all connections have been made properly, switch on TV and make sure the receiver is connected to the Main Power. Press Power button to switch receiver on. If you are using the receiver for the first time or restored to Factory Default, the Main Menu will appear on your TV screen.

1. Select [OSD Language] and press RIGHT/LEFT key to select a language.
2. Select [Country] and press RIGHT/LEFT key to select your country of residence.
3. Select [Channel Search] and press RIGHT or OK key to begin Automatic channel search.
4. Once channel tuning is complete, you are now ready to watch TV

Basic Operation

Program Manage Settings

To access the Menu, press the SETUP button and select [Program]. The Menu provides options to adjust the Program Manage Settings. Select an option and press OK or RIGHT to adjust that setting. Press the EXIT button to exit the Menu.

Program Edit

To edit your program preferences (lock, skip, favorite, move or delete), you will need to enter the Program Edit Menu. This Menu requires a password to access. Enter the default password ‘000000’.

Set Favorite Program/s
You can create a shortlist of favorite programs that you can easily access. Set Favorite TV or Radio program:

• Select the preferred program then press the FAVOURITE button. A Star-shaped symbol will appear and the program is marked as a favourite.
• Repeat the previous step to select more Favorite programs.
• To confirm and exit the Menu, press the EXIT key.

Disable Favorite TV or Radio Program:
Press the FAV button on the Remote Control with the heart-shaped symbol.

View Favorite Programs:

• Press the Fav button and the Favorite Menu will appear.
• Press UP/DOWN to select your Favorite Programs.
• Press OK to select your favorite program.

Delete a TV or Radio Program/s

1. Select the Program and then press the BLUE button. A message will appear. Press OK to delete the program.
2. Repeat the previous step to select more programs to delete.

Skip TV or Radio Program/s

1. Select the program you would like to skip and press the GREEN button. A skip symbol is displayed. The program is marked as a skip.
2. Repeat the previous step to select more programs.
3. To confirm and exit the menu, press EXIT key.

Disable a skip TV or Radio Program:
Press the GREEN button on the skip program with the skip symbol.

Move a TV or Radio Program/s

1. Select the preferred program then press the RED button. A move symbol will appear.
2. Press UP/DOWN to move the program.
3. Press OK to confirm.
4. Repeat the above steps to move more channels.

• Please note : when LCN is set to on, the TV station number will not change according to the position
  number to have the channel number changed to the position number, set LCN to off. Lock Program/s You can lock selected programs for restricted view.

Lock  Program:

1. Select the preferred program then press the YELLOW button. A lock-shaped symbol is displayed. The program is now marked as locked.
2. Repeat the previous step to select more programs.
3. To confirm and exit the menu, press the EXIT button
4. Press the YELLOW button to disable the locked program.
5. To view the locked program, you will be require to enter either the default, or the modified Password.(refer to system se “Set Password”)

Sort

• Sort your channels from the following options:
• [By LCN] – Sort the channels in ascending order.
• [By ONID]-Sort the channels according to the original network ID.
• [By Service Name] – Sort the channels in alphabetical order.
• [By Service ID] – Sort the channels according to the station.

LCN (Logical channel number)

Set LCN on or off.

Video Setting

To access the Menu, press SETUP then select [Picture]. The Menu provides options to adjust the video settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust that setting. Press EXIT to exit the menu

Aspect Ratio
You must set the display format to either 4:3 Pans can, 4:3 Letter Box, 4:3 Full, 16:9 Wide Screen, 16:9 Pillar-box, 16:9 Pan & Scan or Auto to get the maximum display when watching TV.

Resolution
If the video does not appear correctly, change the setting. This setting is to match the most common setting for HDMI.

• [576i] for PAL system TV.
• [576P]: for PAL system TV.
• [720P]: for NTSC or PAL system TV.
• [1080I]: for NTSC or PAL system TV.
• [1080P]: for NTSC or PAL system TV.

TV format
If the video does not appear correctly, you need to change the settings. This should match the most common setting for TVs in your country.

• [NTSC]: for NTSC system TV.
• [PAL]: for PAL system TV.

Channel Search

To access the menu, press SETUP and select [Search Channel].
The Menu provides options to adjust the Search Channel settings. Select an option and press RIGHT/LEFT to adjust the settings.

Press EXIT to exit the Menu.

Auto Search
Search and install all channels automatically. This option overwrites all preset channels.

1. Select [Auto Search] and press OK or RIGHT to start channel search.
2. To cancel channel search, press EXIT.

Manual Search
Install new channels manually. This option adds new channels without changing the current channels list.

1. Select [Manual Search] then press OK or RIGHT. The channel search screen will appear.

2. Press the RIGHT/LEFT key to select the channel frequency.

3. Press OK to start searching channels.

If a channel is found, it is saved and added to the channels list. If channels can’t be found, then exit the menu.

• Country
  Select your country of residence.

• Antenna Power
  Supply Power to Antenna.

Time Setting

To access the Menu, press MENU then select [Time]. The Menu provides options to adjust the time settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the settings.Press EXIT to exit the menu.

Time offset
Select auto or manual for GMT offset adjustments.
Country Region
Country Region is set automatically when you set the country at channel search menu.
Time Zone
Select the Time Zone Offset when [Time Offset] is set to Manual.

Option

To access the Menu, press SETUP and select [Option]. The menu provides options to adjust the OSD Language, Subtitle Language and Audio Language. Select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to exit The Menu.

OSD Language
Select an OSD language.
Audio Language
Select the preferred audio language for watching TV channels. If the language is not available, the default program language will be used.
Subtitle Language
Select the preferred subtitle language.
Digital Audio
Set the desired audio format at the HDMI slot: PCM, Raw HDIM On, Raw HDMI Off, Off (if available).

System Setting

To access the Menu, press SETUP and select [System].The menu provides options to adjust the system settings. Press the UP/DOWN key to select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to exit the Menu.

Set Password
Set or change the password for Locked programs. Enter your old Password or the default password’000000′.You will then be asked to enter your new password. To confirm re‐enter your new password. Once it is confirmed, press EXIT to exit the Menu. Master password ‘888888’

Restore Factory Default
Reset your Set Top Box to the Default Factory Settings. In Main Menu select [Restore Factory Default]and press OK or RIGHT to select. Enter your password or the default password ‘000000’ and press OK to confirm. This option will delete all preset channels and settings.

Information
View model, hardware and software information.

Software update
Software update

USB

To access the Menu, press the SETUP button and select USB.

Multimedia
Switch to USB mode and plug in USB to view files.

Photo Configure
Set the parameters for viewing photographs.

Movie Configure
Set the parameters for displaying movie subtitles.

Technical Specifications

Tuner

| Input Frequency| 170~230MHz

470~860MHz

RF Input level| -25~-80dBm (64QAM)

-10~-75dBm (256QAM)

IF Bandwidth| 7MHz and 8MHz
Modula on| QPSK,16QAM,64QAM,256QAM

Video

| ****

Decoder Format

| MPEG4 AVC/H.264 HP@L4 HEVC/H.265 HT@L4 MPEG2 MP@ML.HL
Output Port| CVBS,HDMI
Input Port| CVBS

Audio

| Decoder Format| MPEG-1(layer1&2&3)
Audio output| Stereo
Audio Input| Stereo

Power

| Voltage| DC 9V (1.5 A)
Working Power| ≤ 10W
Battery| LI-ION 7.4V, 2800mah

Troubleshooting

audio cable correctly
Sound on mute| Turn off mute fanon
Incorrect sound track| Try another sound track
Only sound, no image on the screen| No or incorrect connect with AV cable| Make sure cables are connected correctly
The program is a radio program| Press <TV/RADIO> key to         into TV mode
Remote Controls not responding| The b          is exhausted| Change       eyry
Remote Control is no acing or close enough to the Set Top Box| Adjust the plosion of the Remote Control and move closer to the unit
The image stopped suddenly or mosaic| The signal is too weak| Strengthen the signal

• Remark about reception of HD channels: the reception of HD DVB-T channels requires a better signal than normal SD quality channels. For that reason the TV should be positioned at places where the reception quality is higher. If the reception is not strong enough, the image of HD channels can be interrupted or from bad quality. Important remarks for the reception of the TV channels:
  • The base of the antenna is magnetic; for a better reception of the TV signal, if available, put the base of the antenna on a metallic surface like the bodywork of a car, a fridge, a heating..
  • The TFT-1038 can only receive non encrypted free TV channels.

Guarantee
Lenco offers service and warranty in accordance with the European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

Service
For more information and helpdesk support, please visit www.lenco.com Lenco Benelux BV; Thermae strata 1a, 6361 HB, The Netherlands.

References

• Telepathy - Powering Successful Brands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>