ULTIMEA U2520 Poseidon D60 5.1 Channel Virtual Atmos Soundbar User Manual

Poseidon D60
Model No.: U2520
5.1 Channel Virtual Atmos Soundbar
support@ultimea.com
User Manual

U2520 Poseidon D60 5.1 Channel Virtual Atmos Soundbar

WE ARE READY TO HELP

support@ultimea.com

Prefer video tutorial?
Setup guidance video, USER MANUAL or Trouble Shooting on ULTIMEA website. @Ultimea_Official

support.ultimea.com

+1 888-598-8875(US) Mon-Fri 9am- 5pm(PST)
+49 89-628-25828(EU) Mon-Fri 9am-5pm(CET)

ACCESSORIES LIST

SOUNDBAR CONTROLS

Control Panel

1. “ ”: Power Button
   Press to power on / Hold for 3 seconds to power off.

2. “ ”: Input Mode
   Press to switch channels: eARC-BT-OPT-AUX-USB.

3. “ ”: Bluetooth
   Press to switch to BT channel and enter pairing mode.
   Hold for 3 seconds to disconnect current device and choose to connect to a new device manually on your mobile phone / PC / TV (BT ID: Poseidon D60).

4. “ ”: Volume Down

5. “ ”: Volume Up

Remote Control

1. “ ” : Power Button
   Press to power on / Hold for 3 seconds to power off.

2. “ ” : eARC
   Press to switch to eARC channel.

3. “ ”: BT
   Press to switch to BT channel and enter pairing mode. Hold for 3 seconds to disconnect current device and choose to connect to a new device manually on your mobile phone / PC / TV (BT ID: Poseidon D60).

4. “ ”: OPT
   Press to switch to OPT channel.

5. “ ”: AUX
   Press to switch to AUX channel.

6. “ ”: EQ
   Press to switch among Movie, Dialogue, Music mode, the display will show:

7. “ ”: USB
   Press to switch to USB channel.

8. “ + ”: Volume Up

9. “ – ”: Volume Down

10. “ < ”: Previous
    BT and USB mode: Skip to previous track.

11. “ > ”: Next
    BT and USB mode: Skip to next track.

12. “ ”: Play / Pause
    For BT and USB mode only.
    USB mode: Hold for 3 seconds to switch between single loop playback and list loop playback.

13. “ SURROUND ”: Surround
    Press to adjust surround sound level, the display will show:

14. BASSMX
    Press to adjust bass level, the display will show:

15. “ ”: Mute / Recover the volume.

CONNECT TO TV VIA eARC / ARC

Note:
Your TV’s HDMI port needs to support eARC to transmit the Dolby Atmos audio format to your Soundbar.
Atmos：If you are watching a movie in the Dolby Atmos format, please set the audio output on your TV to Pass Through:
TV Settings > Home > Settings > Sound > Digital Audio Output > Pass Through
DTS: If you are watching a movie in the DTS format, please set the audio output on your TV to PCM：
TV Settings > Home > Settings > Sound > Digital Audio Output > PCM
What’s the difference between: HDMI IN, HDMI ARC, HDMI eARC?

1. HDMI IN is a standard HDMI input that allows you to connect devices to your TV or audio system. It supports audio and video signals, but it does not support audio return channel (ARC) or enhanced audio return channel (eARC) functionality.
2. HDMI ARC is a special HDMI port that supports two-way communication between your TV and audio system. This means that audio can be sent from your TV to your audio system, and audio system can send audio back to your TV.
3. HDMI eARC (Enhanced Audio Return Channel) is an updated version of HDMI ARC that supports higher quality audio formats such as Dolby Atmos and DTS:X.

Note: Please turn on the “CEC” function on your TV.
When eARC / ARC is connected, your TV remote control can control the soundbar and TV simultaneously:

1. Turn on / off
2. Adjust the volume

CONNECT TO TV VIA OPTICAL / AUX

OPTION 1: OPTICAL
NOTE:

1. Make sure the TV’s port is OPTICAL OUT.
2. lf audio is coming from the internal TV speakers, mute or minimize the TV volume.

OPTION 2: AUX
NOTE:

1. Connect the 3.5mm to RCA Audio Cable to your TV’s AUDIO OUT port.
2. Make sure the color of the cable ends matches the color of the TV ports.

In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM

CONNECT TO BLUETOOTH

NOTE:

1. Press the “ ” button on the soundbar or remote control to enter Bluetooth pairing mode.
2. Go to the Bluetooth setting on your phone, find and select “Poseidon D60” to connect the soundbar.

Note: If it’s already in the Bluetooth mode and connected, press and hold “ ” button for 3 seconds to disconnect current device and choose to connect to new device manually on your mobile phone / PC / TV.

CONNECT TO SUBWOOFER AND SURROUND SPEAKERS

1. Use the 6m RCA-RCA cables to connect the subwoofer and surround speakers, please pay attention to match the same color interfaces on the surround speakers with the corresponding ones on the subwoofer and place the surround speakers accordingly.
2. Use power cable to connect your subwoofer and power port.

PAIRING SUBWOOFER

The subwoofer has been paired with the soundbar by ULTIMEA.
However you may need to re-pair the soundbar and subwoofer if there is no sound coming from the subwoofer. Step 1:
Press and hold the “ ” button on the remote control for 3 seconds, the display will show “SUb” flashing.
Step 2:
Press and hold the ON/OFF button on subwoofer for 3 seconds, the white LED will be fast flashing.
The white LED will be solid on when the subwoofer is paired successfully.

PLACEMENT OPTIONS

1. The soundbar and surround speakers should be placed at or near ear level.
2. For a better listening experience, please choose one of the two placement options shown in the illustration above based on your home environment.

WALL MOUNT INSTALLATION

Note: Wall-mounted surround speakers follow the same configuration as shown in the above pictures

SPECIFICATIONS

(Subwoofer)
Frequency Response| 40Hz – 18kHz
Standby Power| <0.5W
Operating Temperature| 0°C – 45°C/32°F – 113°F
Dimensions and Weight

Soundbar| 400(W) x 70(H) x 90(D)mm 15.7” x 2.8” x 3.5”
Subwoofer| 155(W) x 244(H) x 215(D)mm 6.1” x 9.6” x 8.5”
Surround Speaker| 135(W) x 70(H) x 90 (D)mm 5.3” x 2.8” x 3.5”
Packaging| 335(W) x 442(H) x192(D)mm 13.1” x 17.4” x 7.5”
Net Weight| 5.7kg / 12.6Ibs
Gross Weight| 6.3kg / 13.9Ibs

SAFETY INSTRUCTIONS

Please read this user manual carefully and save it for future reference. Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.

• Avoid dropping.
• Do not disassemble.
• Do not submerge in water
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not place dangerous items on top of this device (e.g. liquid filled objects, lit candles).
• Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
• The ideal operating temperature for this product and its accessories is between 41°F/5°Cand 95°F/35°C.
• The adapter should be installed near the device and should be easily accessible.
• Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

PROPER DISPOSAL INSTRUCTIONS

This mark shown on the product or its packaging, indicates that this product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Waste Electrical & Electronic Equipment
Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC REGULATORY COMPLIANCE

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer. ence by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the receiver.
– Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED WARNINGS

This device contains licence-exempt transmitter(s)/ receiver (s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS (s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator & body.

Declaration of Conformity

We (Manufacturer is responsible for this declaration)
Dynanic (Shenzhen) Technology Limited (Company name)
20th Floor, Building 4, Tianan Cloud Park, Bantian St.,
Longgang District Shenzhen, China 518000 (Company address)
Declare under our sole responsibility that the product Trade Mark: ULTIMEA
Product Name: 5.1 Channel Virtual Atmos Soundbar Model No.: U2520
To which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive (2014/53/EU) & RoHS (2011/ 65/ EU) product is responsible to affix CE marking, the following standards were applied:
EN 55032:2015/A11:2020
EN 55035:2017/A11:2020
ENIEC 61000-3-2:2019
EN 61000-3-3:2013/A1:2019
ETSIEN 301 489-1 V2.2.3(2019-11)
ETSIEN 301 489-17 V3.2.4(2020-09)
EN 300 328 V2.2.2(2019-07)
EN 50663:2017
ENIEC 62368-1:2020+A11:2020
IEC62321-3-1:2013
IEC 62321-4:2013+A1:2017
IEC 62321-5:2013
IEC 62321-6:2015
IEC 62321-7-1:2015
IEC 62321-7-2:2017
IEC 62321-8:2017
Full Name: Yoyo.Yu
Position: Approbation Manager
Signature:
Place/Date: Shenzhen,China/Dec.25-2022

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Dolby Atmos, Dolby Vision, and the double-D symbol are trademarks of Dolby.Laboratories.
5.1 Channel Virtual Atmos Soundbar
Model No.: U2520
SHUNSHUN GmbH
Remeracker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
UK Crossborder limited
7 Bell Yard London WC2A 2JR, UK United Kingdom
Made in China
Manufacturer: Dynanic (Shenzhen) Technology Limited
Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St.,
Longgang District, Shenzhen, China 518000

If you need our support, kindly reach out to our service team. We are always glad to help.
https://support.ultimea.com/hc/en-us/sections/19479371339673-Apollo-SR60
+1 888-598-8875 (US)
Mon-Fri 9am-5pm (PST)
+49 89-628-25828 (EU)
Mon-Fri 9am-5pm (CET)
support@ultimea.com
support.ultimea.com
@ultimea_official

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>