niko 353-651021 Presence Detector Instruction Manual

niko 353-651021 Presence Detector

Product Information

• Product Name: Presence detector 353-651021
• Manual: Included
• Mounting: SnapFit
• Installation: Flush mounting
• LED Behavior:
  • Green LED continuous on – Connection OK
  • Green LED flashing – Warming up
  • Red LED continuous on – Error
  • Blue LED flashing – Walk test active
• Wiring:
  • Secondary: 353-x5xxx1 master
  • Secondary: 353-651021 secondary
  • DALI zone 1
  • DALI zone 2
  • DALI zone 3
• Product Safety: This product must be secured with a miniature circuit breaker (MCB) of max. 16 A in the electrical cabinet. The MCB rating is limited by national installation rules.
• Mounting Options:
  • Fixed Ceiling: NOT REMOVABLE
  • Suspended Ceiling: REMOVABLE
• Dimensions:
  • a: 56.9 mm
  • b: 9.5 mm
  • NL: 44 mm
  • c: 10 – 12 mm
  • d: 45 – 55 mm
• App Settings: Optional
• Factory Settings: Sensitivity – High
• Supported Languages: FR, DE, DK, SE, NO, IT, PL, SK
• Specifications:
  • Article number: 353-651021
  • Configuration: DALI-2 secondary/BMS
  • Input voltage: via the DALI bus
  • Maximum current consumption: 28.1 mA
  • Maximum startup time DALI: < 1200 ms
  • Maximum PIR detection startup time: 70 s
  • Light intensity range: Not specified
  • Detection angle: Not specified
  • Detection range (PIR): Not specified
  • Ambient temperature: Not specified
  • Mounting method: Flush mounting with SnapFit mounting bracket
  • Mounting height: Not specified
  • Drill diameter: 76 mm
  • Minimum flush mounting depth: 56.9 mm
  • Colour: White (RAL 9010)
  • Dimensions visible (HxWxD): Not specified

Product Usage Instructions

1. Mounting:
   • For flush mounting, use the SnapFit mounting bracket.
   • If using a fixed ceiling, the product is NOT REMOVABLE.
   • If using a suspended ceiling, the product is REMOVABLE.
   • Ensure the minimum flush mounting depth is 56.9 mm.
   • Drill a hole with a diameter of 76 mm for mounting.
2. Wiring:
   • Connect the secondary 353-x5xxx1 master and 353-651021 secondary to the DALI zone 1, zone 2, and zone 3.
   • Follow the wiring diagram provided in the manual for proper connection.
3. LED Behavior:
   • If the green LED is continuously on, it indicates a successful connection.
   • If the green LED is flashing, it means the product is warming up.
   • If the red LED is continuously on, there is an error.
   • If the blue LED is flashing, the walk test is active.
4. App Settings:
   • The app settings are optional and can be configured according to user preferences.
   • The factory settings have sensitivity set to high.
5. Additional Information:
   • For more information or troubleshooting, refer to the manual or contact customer support at 5413736374362.

Presence detector P46MR, DALI-2, secondary and BMS, 12-13 m, 360°, SnapFit, for flush mounting

Wiring

Secondary

This product must be secured with a miniature circuit breaker (MCB) of max. 16 A in the electrical cabinet. The MCB rating is limited by national installation rules.

BMS

Dimensions

Installation

230 V/DALI power – OFF

App settings 230 V/DALI power – ON

• App-intelligent

Settings by BMS software

DALI power – ON

Table memory bank 2

Address| Description| Default value| Memory type
0x00| Address and last accessible memory location| 0x03| ROM
0x01| Indicator byte (manufacture definable)| 0x00| any
0x02| Memory bank lock byte (<>0x55 = Read Only else Read/ Write)| 0xFF| RAM
0x03| PIR sensitivity segment A (MR, LR and HC detectors) 4 = MAX 3 = HIGH 2 = LOW 1 = MIN 0 = OFF| 0x03| NVM
0x04| PIR sensitivity segment B (LR and HC detectors)
4 = MAX 3 = HIGH 2 = LOW 1 = MIN 0 = OFF| 0x03| NVM
0x05| PIR sensitivity segment C (LR and HC detectors)
4 = MAX 3 = HIGH 2 = LOW 1 = MIN 0 = OFF| 0x03| NVM
0x06| LUX range

• 0 = NORMAL 0 – 1023 lux, 10-bit
• 1 = HIGH 0 – 10360 lux, 14 bit

| 0x00| NVM

LED behaviour

230 V/DALI power – ON

Green LED continuous on| | Connection OK|
---|---|---|---
Green LED flashing| | Warming up| Wait
Red LED continuous on| | Error| More info – >
Blue LED flashing| | Walk test active

Specifications

• Article number 353-651021
• Configuration DALI-2 secondary/BMS
• Input voltage: via the DALI bus
• Maximum current consumption: 28.1 mA
• Nominal current consumption (12 V, 25°C): 8.1 mA
• Maximum startup time DALI: < 1200 ms
• Maximum PIR detection startup time: 70 s
• Light intensity range: 0 – 10360 lux (see DALI BMS settings)
• Detection angle: 360°
• Detection range (PIR): ø 12 m from a height of 3 m
• Ambient temperature -25 – +40 °C
• Mounting method: flush mounting with SnapFit mounting bracket
• Mounting height: 2 – 3.5 m
• Drill diameter: 76 mm
• Minimum flush mounting depth: 56.9 mm
• Colour: white (RAL 9010)
• Dimensions visible (HxWxD): 100 x 100 x 9.5 mm
• Dimensions (HxWxD): 120 x 120 x 66.4 mm
• Wire capacity: 1.5/2.5 mm²
• Protection degree: IP20
• Impact resistance: IK02
• Modification  o f settingsapp (iOS/Android) and 2-way Bluetooth® communication/BMS software
• Maximum range Bluetooth® (free field, depending on the device): 50 m
• Operating frequency:   2.4 GHz
• Maximum radio frequency power: -2 dBm
• Halogen-free: yes
• Marking :CE

Detection area

Troubleshooting

• Problem: Possible cause
  • Load does not turn on The wiring is not correct
  • Load does not turn off The detector receives false triggers
  • App cannot connect to the detector
  • Bluetooth® has been disabled on your mobile device
• Proposed solution
  • Check the wiring scheme
  • Check for any objects that may cause false triggering and remove them from the detection range or lower the sensitivity
  • Enable Bluetooth® on your mobile device

Support & contact

• West 40 9100 Sint-Niklaas, Belgium
• www.niko.eu
• EN +32 3 778 90 80
• [email protected]

References

• Niko - home automation, switches, socket outlets and detector

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>