RAVAK XC00100041 Freedom Corner Instruction Manual
- June 12, 2024
- RAVAK
Table of Contents
RAVAK XC00100041 Freedom Corner
Product Information
The product is the FREEDOM Corner (L/R) 170×80, designed and manufactured by RAVAK. It is a corner bathtub with dimensions of 170×80. The bathtub is available in both left and right configurations.
The manufacturer, RAVAK, reserves the right to make amendments or improvements to the design or features of the product. For more information about the product, it is recommended to contact your local Ravak dealer.
It is important to observe local country guidelines or laws regarding recycling to help preserve the environment. Materials that are not suitable for recycling should be disposed of at an official and suitable waste control center.
Product Usage Instructions
To clean the bathtub, you can use RAVAK Cleaner, which is specifically designed for this purpose. Apply the cleaner to the bathtub’s surface and clean it using a soft cloth or sponge. Rinse thoroughly with water after cleaning.
For disinfection, RAVAK Desinfektant can be used. Follow the instructions provided with the desinfektant for proper usage.
For further assistance or inquiries about the product, you can contact RAVAK’s representative offices:
-
RAVAK a.s., Representative Office in Ukraine: 21 Dniprovska Naberezhna str., 2nd floor, 02081, Kyiv, Ukraine;
Tel: 00380 44 2203232, 00380 44 3605200;
Fax: 00380 44 2204343;
Email: ravak@ravak.kiev.ua;
Website: www.ravak.ua -
OOO RAVAK ru: ul. Staropetrovskiy pr. 7A, Moskva 125 130;
Tel/Fax: 007 495 710 82 23, 007 495 450 12 77;
Email: ravak@inbox.ru;
Website: www.ravak.com -
RAVAK Baltic: Butrimoni g. 5, Kaunas, Lietuva;
Tel: +370 37 328013;
Fax: +370 37 328016;
Email: info@ravak.lt
For additional information, you can also visit RAVAK’s website:
www.ravak.com
Version: 02012023
Assembly Instruction
TOOLS
ASSEMBLY STEPS
For further information, contact your local Ravak dealer. The manufacturer reserves the right to amend or improve on existing designs or features. Please help preserve the environment by observing local country guidelines or laws regarding re-cycling. Materials which are not suitable for re-cycling must be disposed of at an official and suitable waste control center.
Maintenance
Clean the plastic parts with a cloth and mild detergent. never use any abrasive pastes, dissolvent, acetone or detergents and disinfectants, that contain chlorine. the manufacturer accepts no liability for any type of use or care other than those contained in these instructions. The manufacturer reserves the right to introduce technical changes without notice. For further information about assembly, use, and care contact your local dealer. The manufacturer recommends: RAVAK CLEANER – works to remove old and dried-on debris from glass surfaces, shower frames, enamel and acrylic bathtubs, washbasins and water taps; RAVAK DISINFECTANT – is a special preparation with considerable anti-bacterial and anti-fungal effects.
RAVAK a.s., Obecnická 285, 261 01 Příbram I
tel.: +420 318 427 200, 318 427 111
fabx: +420 318 427 269
e-mail: info@ravak.cz,
www.ravak.com
References
- RAVAK COM - Acrylic Bathtubs and Shower Enclosures
- RAVAK a.s. - Když koupelnu, tak RAVAK – české koupelny světového designu!
- RAVAK GmbH - Das Badeerlebnis in Ihrem Badezimmer
- RAVAK Hungary Kft. - ha fürdőszoba akkor RAVAK
- Ravak Polska S.A. - dożywotnia gwarancja na wszystkie wanny. Kompleksowe wyposażenie łazienek.
- Kúpeľňa a zariadenie kúpeľne | RAVAK
- RAVAK UA - ЕСЛИ ВАННАЯ КОМНАТА, ТО RAVAK (ванны, душевые уголки, умывальники, гидромассаж )
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>