LAMBARIO LT47-05022 LED Lights User Manual
- June 12, 2024
- LAMBARIO
Table of Contents
LAMBARIO LT47-05022 LED Lights
Product Information
- Model Number: LT47-05022
- Power: 48.9W
- Light Output: 4500 lumens
- Light Source: 4100K LED
- IP Rating: IP50
- Barcode: 8605036697952
- Energy Efficiency Class: Non-replaceable light source
- Control Gear: Non-replaceable
- Dimensions: 46mm x 124.6mm x 263mm
Product Usage Instructions
This product is suitable for a maximum use of 10-12 hours daily. Using the product continuously for 24 hours per day would void the warranty.
This product contains a light source of energy efficiency class
Suitable for a maximum use of 10-12 hours daily usage of the product, for 24hours per day would void the warranty
Non-replaceable light source
Non-replaceable control gear
NOTICE
- Read thoroughly before installing. the luminaire shall be installed by a qualified electrician,and hand over these introductions to user for maintenance afterwards.
- Once turn on the luminaire, after about 1 second the lamp will light. The delay is normal and is due to the soft startcircuitry of the Driver.
WARNING
- Turn off the main power before maintenance.
- If not, may cause the risk of electric shock and fire.
- Check the strength of installation material.
- Ifinstalled incorrectly.may cause the luminaire to drop down.
Warranty
This product is under warranty from manufacturing defects only. The warranty is valid for two (2) years from the date of purchase. This warranty does not apply to damage caused by improper installation or abnormal wear and tear. There is no warranty against damage to any surface due to incorrect removal or installation.
Dimensions
WARNINGS
- Please read the usc:r guide carefully before you install or use lhe product.
- Before installation, please read and follow the technical specification and symbols shown in the product box.
- Before installing, make sure that the electrical power is disconnected
- The product is not suitable for regulating circuit breaker
- The product is not suitable for covering with thermo-insulating material
- Do not throw the product away from household waste. Please ask your municipality about how ta use it
- The product must be installed and maintained by qualified persons.
FEATURES
Installation
Strictly follow these instructions for installing.
- Fixing the hanging parts, the hanging parts need to be strong enough.
- Installing the brackets and fixing the screws into the brackets.
- Hanging the lamp into the hooks.
- Connecting the wire to the lamp.
- Turning on the power to make sure the light is working
SPECIFICATION
WARRANTY CONDITIONS
- If a defect occurs during the warranty period, U1e company is responsible for repairing it. If repair is not possible then the company must replace the product
- The warranty is valid by affirming that the product is correctly installed in accordance with the remarks, symbols and / or technical specifications printed on lhe box or the usage guide.
- The Company shall not be liable for any injury or damage from improper use of the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>