LAMBARIO LY30-01130 IR24 RGB Controller Instruction Manual
- June 12, 2024
- LAMBARIO
Table of Contents
LAMBARIO LY30-01130 IR24 RGB Controller
Technical parameters
-
Working temperature: -20-60 ℃
-
Voltage supply: 12V-24V
-
Output: 3 channels
-
Connecting mode: common anode
-
Net weight: 50g
Function model: 20 models. -
Static power consumption: <1 W
-
Output current: <2 A (each channel)
-
Output power: 72W
Direction for use
- Connect the load wire at first, following by the power wire; Please ensure short circuit can’t occur between connecting wire before you turn on the power
- Standard color changes as follows:
Brightness +( 16 in all )| Brightness-( 16 in all )| Off|
On
---|---|---|---
Static red| Static green| Static blue| Static white
Static orange| Static pea green| Static dark blue| 7 color
jumpy change/7 color fade change
Static dark yellow| Static cyan| Static brown| White color
shrobe flash
Static yellow| Static light blue| Static pink| All color
fade change
Static straw yellow| Static sky blue| Static purple| 3 base
color jumpy
change/ 3color fade
change
Direction:
- When switching to dynamic modes the button of “Brightness +”/ “Brightness -” means the speed of light change is up/ down, there are 100 step in all.
- The FADE and SMOOTH all have two modes, which are “3 base colors jumpy/7 colors jumpy” and “3 base colors fade/7 colors fade”, you can press one more time to change it.
- when press FADE and SMOOTH, the “FLASH” and “STROBE” key are invalid.
- When in the static modes, press the “FLASH” /“STROBE” key, the mode will change to be “ the single color Stroboflash/ Gradual changing”.
Suitable for a maximum use of 10-12 hours daily usage of the product, for 24hours per day would void the warranty
Key instruction
Connecting drawing
WARNINGS
- Please read the user manual carefully before installing or using the product.
- Before installation please read and follow technical specification and symbols indicated on the product box.
- Before installation ensure that electricity is turned off.
- Product is not suitable for dimmer switches.
- Product is not suitable for covering thermally insulating material.
- Do not dispose with household waste. please ask your local municipality for the way of utilization.
- Product must be installed and maintenanced by qualified person.
Customers Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>