ecosmart Fire AB8 Bioethanol Fireplaces Instruction Manual
- June 2, 2024
- ecosmart Fire
Table of Contents
CLEARANCES & INSTALLATION MANUAL
BIOETHANOL ONLY
AB8 Bioethanol Fireplaces
Please read these instructions completely before operating the EcoSmart™ Fire.
Not intended for table-top use where frequent relocation is required.
|
---|---
Mix Fire Bowls
From 23.4 kg, 52lbs| Nova Series
From 19.9kg, 43.9lbs
|
Pod Series
From 39.3kg, 86.4lbs| Stix Series
From 20.7kg, 45.5lbs
e-NRG bioethanol is the ONLY fuel to be used in this appliance.
! WARNINGS:
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR
EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF
LIFE.
NOTE: Weight is approx only. Weight includes burner and black glass charcoal
(if applicable).
Fireplace Clearances
Please read these instructions completely before operating the EcoSmart™ Fire.
When using Bioethanol as a fuel source this model is suitable for indoor and
outdoor use.
Not intended for table-top use where frequent relocation is required.
Before installation ensure that the model is positioned in accordance with the
compulsory minimum clearances outlined below.
If used indoors ensure that you pay attention to the Minimum Room Sizes below:
| AB8/ AB8(EN) | 116m3 [4096ft3] per burner |
|---|---|
| AB3 | 40m3 [1413ft3] per burner |
| BK5 | 70m3 [2472ft3] per burner |
WARNING: Ensure that your fire is positioned away from flammable
materials and other sources of ignition at all times. Pay very close attention
to positioning the fire away from items that may move as a result of wind and
drafts. For example trees/branches/curtains/ paper and the like.
The base of the burner within the model must never come into direct contact
with flammable materials.
Side clearances to fixed and stable furniture items that are not susceptible
to movement (e.g lounges or patio furniture) must remain a minimum of 600mm
[23.6in] away from the flame at all times.
Overhead clearances to items that are susceptible to movement (e.g. Trees)
must remain a minimum of 2000mm [78.7in] away from the flame at all times.
Stainless steel will rust or corrode over time if contamination or debris is
not cleaned or removed immediately. When not in use, it is recommended that
you protect your fireplace from water damage or corrosion with a protective
cover and always use the Burner Lid included with your model to safeguard the
burner.
Fireplace Installation
MIX FIRE BOWLS & NOVA SERIES
- Add the majority of the chosen decorative media around the unit platform. Do this before inserting the burner to avoid scratching the surface of the burner;
- Insert Burner into base then carefully adjust or add more of the decorative media around the burner – be careful not to scratch the burner surface;
- Do not place decorative media on top of the burner or where they can interfere with the operation of the burner or the flame;
- These models come with Ground Fixing Brackets so they can be installed in a fixed position. Follow the instructions supplied with the Ground Fixing Brackets to complete the installation of the product.
These products feature 360º height- adjustable articulating feet. Adjust the
feet by turning them in either direction until you achieve a perfectly level
and stable model before operating.
If you live in extreme weather conditions where accumulation of snow is
likely, use of the Winter Bag is imperative in order to be covered by the
warranty.
OPERATE ACCORDING TO THE BURNER OPERATIONS MANUAL INCLUDED WITH THE
BURNER.
POD SERIES
- Insert the metal tray into the base.
- For Indoor Installations insert the Indoor Safety Tray. The appliance must not be operated indoors without the Safety Tray installed. For outdoor installation go to Step 3.
- Insert Burner into metal tray.
- If you have the optional glass screen, refer to instructions included with your glass screen.
- Add glass charcoal around the burner – be careful not to scratch the burner surface. Do not place glass charcoal on top of the burner or where they can interfere with the operation of the burner or the flame.
- These models come with Ground Fixing Brackets so they can be installed in a fixed position. Follow the instructions supplied with the Ground Fixing Brackets to complete the installation of the product.
If you live in extreme weather conditions where accumulation of snow is
likely, use of the Winter Bag is imperative in order to be covered by the
warranty.
OPERATE ACCORDING TO THE BURNER OPERATIONS MANUAL INCLUDED WITH THE
BURNER.
STIX SERIES
Equipment required: Philips head screw driver
- Confirm you have received all necessary parts as illustrated.
- Remove the three (3) screws (part A) that are in place on the outside rim;
- To insert burner, carefully turn the model upside down;
- Insert burner from above, with burner face facing down;
- Once the burner is positioned against the top rim of the Stix centre, screw into position with three (3) screws (part A) from the outside of the model;
- Carefully turn the model to upright position. Position the fireplace in accordance to the compulsory minimum clearances outlined in the Instruction Manual.
- This model comes with Ground Fixing Brackets so that it can be installed in a fixed position. Follow the instructions supplied with the Ground Fixing Brackets to complete the installation of the product.
OPERATE ACCORDING TO THE BURNER OPERATIONS MANUAL INCLUDED WITH THE BURNER.
MAD Design Group
Tel: +61 2 9997 3050
Email: [email protected]
REV0123
© Copyright 2004 – 2023 MAD Design Group.
All rights reserved. V0123