Ecosmart LR431U RGB Color Changing Outdoor Rope Light User Guide
- May 15, 2024
- Ecosmart
Table of Contents
LR431U RGB Color Changing Outdoor Rope Light
USE AND CARE GUIDE
16.4 ft RGB COLOR CHANGING
OUTDOOR ROPE LIGHT
Questions, problems, missing parts? Before returning to the
store, call EcoSmart Customer Service
8.am.-7 p.m., EST, Monday – Friday
9am. – 6 p.m,, EST, Saturday
1-800-910-7164
HOMEDEPOT.COM/ECOSMART
Safety Information
IMPORTANT SAFETY INSTRUCTIONS
Read All Instructions
WARNING: Do not plug into the power before
all installation being finished.
WARNING: Do not submerge the flexible light in liquids or use the
product in the vicinity of standing water or other liquids.
WARNING: Do not use if there is any damage to the
light or cord insulation. Inspect periodically.
WARNING: Do not cover this product as the covering may cause the flexible
light to over heat and either melt or ignite.
WARNING: Risk of Electric Shock. When used outdoors, install only to a
covered Class A GFCI receptacle that has a weatherproof enclosure.
WARNING: When using outdoor portable lighting products, basic safety
precautions
should always be followed to reduce the risk of fire, electric shock, and
personal injury, including the following:
-
Use only three-wire outdoor extension cords that have three-prong grounding
plugs and grounding receptacles that accept the appliance’s plug. -
Use ground fault circuit interrupter (GFCI) protection on the circuit(s) or outlet(s)
-
Use only UL approved outdoor extension cords, such as type SOW, STW, STOW,
SJW, SJOW, SJTW, or SJTOW. This designation is marked on the jacket of the
extension cord. Receptacles are available having built-in GFCI protection and are
able to be used for this measure of safety.
Class 2 Power Supply
Model: S036F2401500U
Input: 120Vac, 60Hz, Max.1000mA
Output: 24Vdc, 1.5A
To comply with the published safety standards, the following must be observed
when using
this switching power supply.
Note:
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS and DANGER-TO
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS.
Safety Information(continued)
-
For connection to supply not in the U.S.A. use an attachment plug adapter of the proper
configuration for the
Power outlet, if needed. Or, If the shape of the plug does not t the power outlet, use an
attachment plug adaptor
of the proper configuration for the power outlet. -
Please read the instructions Before using the power supply.
-
This unit is not intended for use by persons(including children) with reduced physical,
sensory or mental capabilities,or
lack if experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.Children should be
supervised to ensure they do not play with the unit. -
Please Don’t use the charger in the damp environment and High temperature.
-
Don’t operate unit with damaged plug.
-
Don’t disassemble charger. Disassembly may result in a risk of electric shock or re.
-
To reduce the risk of electric shock, unplug the charger from the outlet when not in use.
-
Don’t operate unit if it has been subjected to damage in any way.
-
Never open the equipment. For safety reason, qualified service personnel should only open
the equipment. -
If one of the following situations arises, get the equipment checked by service personnel:
a. Liquid has penetrated into the equipment.
b. The equipment has been exposed to moisture.
c. The equipment has not work well or you can not get it work according to user‘s manual.
d. The equipment has dropped and damaged.
e. If the equipment has obvious sign of breakage -
The power supply shall be installed according to specification.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two
conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class
B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable
protection against harmful interference in a residential installation. This
equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with
the instructions, may cause harmful interference to radio communications.
However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance
could void the user’s authority to operate the equipment.
Responsible Party-U.S. Contact Information
Elecwish Inc/Add: 4225 Etiwandaavenue, Suite 1 mira loma, California 91752,
USA/Elecwish.com
Care and Cleaning
□ Before attempting to clean the light strip, unplug the adaptor from the
power outlet.
□ To clean the light strip, use a clean, dry, or slightly damp cloth.
□ Do not use any cleaners with chemicals, solvents, or harsh abrasives, as
damage to the strip light may occur.
□ Allow the light strip and components to dry thoroughly before plugging the
power adaptor back into the outlet.
Warranty
2-YEARS LIMITED WARRANTY
The manufacturer warrants this lighting fixture against defects in materials
and workmanship
for a period of two years from the date of purchase. If within this period the
product is found to
be defective in material or workmanship, the product must be returned, with a
copy of the bill
of sale as proof of purchase, to the original place of purchase. The
manufacturer will, at its
option, repair, replace, or refund the purchase price to the original
purchaser or consumer.
This warranty does not cover light bulbs or the fixture becoming damaged due
to misuse,
accidental damage, improper handling and/or installation, and specifically
excludes liability for
direct, incidental, or consequential damages. As some states do not allow
exclusions or
limitation on an implied warranty, so the above exclusions and limitations may
not apply. This
warranty gives you specific rights and you may also have other rights that
vary from state to
state.
Contact the Customer Service Team at
1-800-910-7164 or visit
www.HomeDepot.com/EcoSmart.
Pre-installation
Package Content
Part Description Quantity
A Rope light 1
B Inline controller 1
C Plug-in power supply 1
D Remote control 1
E Mounting clips 8
F End cap 16
G Screws 1
Installation
Install the rope light
CAUTION: This LED product is designed to be used only with the
24V DC power supply included with the kit. Do not operate with any
other power supply type. Disconnect power at the source prior to
attempting installation.
□ Connect the rope light(A), controller(B) and the power supply(C); Use
the caps to secure all the connection joints tightly
□ Mount the clips with screws and fix the rope light
□ Plug the 24V DC power supply(C) into an appropriate 120V power outlet
Install the Extension With Additional Rope Light (Buy Seperately)
1 Remove the end cap (G) from the first rope light(A) in the series by
turning counterclockwise.
CAUTION: After connecting an extention, caps must be tightly
secured before the power is connected. The maximum connecting
length is 65.6ft. Do not exceed this limit.
□ Connect the end of first rope light(A) in the series with the extension
rope’s head(A1) and use the attached cap to secure it.
□ Attach the end cap (G) to the last extension rope light in the series and
ensure the connection is secure.
□ CONNECTING THE ROPE LIGHTS
2 MOUNTING THE WHOLE ROPE LIGHTS
□ Use the screws (F) to fix the clips(E) on the desired position
□ Place the combined rope light securely into the mounting clip (E)
3 After fix the rope light, check again if every connection point is well secured.
□ Plug the power supply(C) into the power source to start your colorful life.
□ PLUG INTO THE POWER OUTLET
Operation
1. Operating the remote
CAUTION: The remote control included utilizes a 3V CR2025 battery; Do not
dispose of batteries
in fire as they may explode or leak. Please dispose of used batteries
immediately and safely. Only
replace with the same battery type. Examine devices and make sure the battery
compartment is
correctly secured, e.g. that the screw or other mechanical fastener is
tightened. Do not use if
compartment is not secure.
WARNING: KEEP BATTERIES OUT OF THE REACH OF CHILDREN! BATTERIES ARE NOT A
TOY! If swallowed,
they can cause severe injury or death within 2 hours. In case of swallowing,
call emergency
services immediately. Tell others of the risks associated with button
batteries to keep kids safe.
□ Remove the plastic tab from the back of the handheld remote (C).
□ Ensure the battery contacts are clean prior to battery installation.
□ Remove batteries from equipment when not in use for an extended period to
time.
□ Aim the remote directly at the controller.
2. Operating The Controller
Questions, problems, missing parts? Before returning to the store,
call EcoSmart Customer Service
8 am_7 pm,, EST, Monday-Friday, 9 a1m.-6p.m., EST, Saturday
References
- Elecwish - Shop Quality Home Furniture at Affordable Price
- EcoSmart - Light Bulbs - Lighting - The Home Depot