LAMBARIO 06610 LED Panel Light User Manual

LAMBARIO 06610 LED Panel Light

Product Information

The LED Panel Light is designed for efficient and long-lasting lighting in various indoor applications. With an input voltage of AC200~240V and a frequency of 50/60Hz, it provides reliable and consistent illumination.

Product Specifications

• Power: 48W
• Dimensions: 595mm x 595mm x 44mm

Product Usage Instructions

Before installing or using the LED Panel Light, please read and follow these instructions carefully:

1. Ensure that the power supply is compatible with the AC200~240V, 50/60Hz input voltage of the LED Panel Light.
2. Choose a suitable location for installation, such as hotels, conference/meeting rooms, factories & offices, commercial complexes, residential/institution buildings, schools, colleges & universities, hospitals, etc.
3. Make sure the installation surface is clean and free from any obstructions.
4. Turn off the power supply before installing the LED Panel Light.
5. Carefully connect the LED Panel Light to the power supply, following the provided wiring diagram.
6. Securely mount the LED Panel Light to the installation surface using the appropriate mounting brackets or accessories.
7. Double-check all connections and ensure that they are properly insulated.
8. Turn on the power supply and test the LED Panel Light to ensure it is functioning correctly.
9. Do not exceed a maximum daily usage of 10-12 hours to maintain the warranty. Continuous usage for 24 hours a day may void the warranty.
10. If any issues or abnormalities are observed during usage, immediately disconnect the power supply and consult a qualified technician or contact our customer support for assistance.

WARNING/AVERTISSEMENT

• Turn power off before inspection, installation or removal.
• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from themanufacturer of his service agent.
• Supply connection and other external wiring conductor shall be at least 0.75mm? and confirm to 60227IEC52.
• Suitable for a maximum use of 10-12 hours daily usage of the product, for 24hours per day would void the warranty

Applications

• The LED Panel lighting fixture can be applied to hotels, conference / meeting rooms, factories & offices, commercial complexes, residential / institution buildings, schools, colleges & universities, hospitals, etc.

INSTALLATION

1. Make a hole ceiling

2. Put up the panel onto the ceiling

3. Wiring the DC cable of the panel to the powersupply. And wiring the AC source cable to the powersupply

4. Turn on the switch, test the fixture light on

DIMENSION

WARNINGS

1. Please read the user guide carefully before you install or use the product.
2. Before installation, please read and follow the technical specification and symbols shown in the product box.
3. Before installing, make sure that the electrical power is disconnected
4. The product is not suitable for regulating circuit breaker
5. The product is not suitable for covering with thermo-insulating material
6. Do not throw the product away from household waste. Please ask your municipality about how to use it.
7. The product must be installed and maintained by qualified persons.

WARRANTY CONDITIONS

1. If a defect occurs during the warranty period, the company is responsible for repairing it. If repair is not possible then the company must replace the product.
2. The warranty is valid by affirming that the product is correctly installed in accordance with the remarks, symbols and / or technical specifications printed on the box or the usage guide
3. The Company shall not be liable for any injury or damage from improper use of the product.

www.lambario.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>