eira ER2692UEX 4 Port
USB
2.0
Extender User Manual

eira ER2692UEX 4 Port
USB
2.0
Extender

Product Information

The USB Extender is a device that allows you to extend USB connections over IP/Ethernet. It supports USB 2.0 High-Speed and is compatible with USB 1.1 Full-Speed and USB 1.0 Low-Speed. The extender has 4 USB 2.0 inputs and 1 USB 2.0 output, allowing you to connect multiple USB devices. It is compatible with CAT5e/6/7 network cables, with a transmission distance of up to 100m for CAT5e and up to 150m for CAT6/7. The transmitter is powered by the source device, eliminating the need for an additional power supply. It also supports USB hub connection, switch relay for increased transmission distance, and hot- plugging of USB devices. The extender provides lightning protection, surge protection, and ESD protection. It is a plug-and-play device, making it easy to set up and use.

Package Contents

• Transmitter x1
• Receiver x1
• DC5V/1A x1
• User Manual x1
• USB Cable x1

Connection Instructions:

1. Connect the transmitter to the signal source device via USB cable.
2. Connect the USB device to the receiver.
3. Connect the transmitter and receiver with Cat5e/6/7 network cable.
4. If needed, connect a switch between the transmitter and the receiver to further extend the transmission distance.
5. Plug the power supply into the receiver to power on the system.

Q & A:

Q: There is no response after USB device is connected?
A: Please check the following:

1. Ensure the driver is installed properly.
2. Check if the network cable conforms to IEEE-568B standard and if the cables are firmly connected.
3. Reset the receiver by pressing the reset button or repower it.

Q: The receiver is unstable when connected to an external web camera?
A: When connecting high-power USB devices, it is necessary to supply additional power to external devices.

Specification:

• Item Compatibility: USB 2.0, compatible with USB 1.1, USB 1.0
• Transmission Rate: Compatible with High-Speed (480Mbps), Full-Speed (12Mbps), Low-Speed (1.5Mbps)

Important Safety Instructions

1. To prevent electric shock, please ensure that all apparatus is properly grounded.
2. Place the device in a well-ventilated area, do not block any ventilation openings.
3. Do not expose this apparatus to rain or place it near water. Any liquid that goes into the apparatus may cause a failure, fire, or electric shock.
4. Do not place the device on an uneven or unstable surface. The device may fall resulting in a malfunction.
5. Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
6. If a three-party power supply is used, please ensure that the power supply specifications meet the product requirements.

Introduction

• This is a USB 2.0 extender, which can realize one-to-one connection through CAT5e/6/7 network cables, with a transmission distance of up to 100m for CAT5e and 150m for CAT6 and above;
• When the connection passes through the switch, the input and output cable distances can reach 100m respectively.
• It supports 4 channels of USB 2.0 device input, such as printer, camera, scanner, USB flash drive, keyboard, mouse, touchscreen, etc., and supports gigabit switch cascade.
• It can be used for security monitoring, gaming, industrial control, professional audio-visual, smart medical and other fields.

Features

1. Support USB 2.0 High-Speed, Compatible with USB 1.1 Full-Speed, USB1.0 Low-Speed.
2. Support 4 USB 2.0 inputs and 1 USB 2.0 output.
3. Compatible with CAT5e/6/7 network cables, CAT5e transmission distance can reach 100m, and CAT6/7 transmission distance can reach 150m.
4. Support USB hub connection.
5. The transmitter is powered by the source device, no additional power supply is required.
6. Support switch relay, the transmission distance of signals can be increased through the switch.
7. Support hot-plugging of USB devices and automatically identify USB High-Speed, Full-Speed and Low-Speed
8. Lightning protection, surge protection, ESD protection.
9. Plug and play.

Package Contents

Panel Description

Transmitter

1. RJ45 Ports: Connect with CAT5e/6 network cable
2. USB-A Ports: Connect with computer
   

Receiver

1. Reset Button: Press to restart the device
2. RJ45 Ports: Connect with CAT5e/6/7 network cable
3. Power Input: Connect with DC5V/1A power adapter
4. USB-A Ports: Connect with USB 2.0 devices such as USB flash drive, keyboard, mouse

Installation Procedures

One to One Connection

Switch relay

Connection Instructions

1. Connect the transmitter to the signal source device via USB cable, and then connect the USB device to the receiver.
2. Connect the transmitter and receiver with Cat5e/6/7 network cable. If the transmission distance needs to be further extended, connect the switch between the transmitter and the receiver.
3. Plug the power supply into the receiver to get started.

Q & A

• Q: There is no response after USB device is connected?
•  A：

1. Please check whether the driver is installed properly；
2. Please check whether the network cable conforms to IEEE-568B standard and whether the cables are firmly connected；
3. Reset the receiver by pressing the reset button or repower it.

• Q: The receiver is unstable when connected to an external web camera？
  • A: When connecting high-power USB devices, it is necessary to supply additional power to external devices.

Specification

Transmission Rat e

| Compatible with High -Speed(480Mbps), Full-Speed(12Mbps), Low- Speed(1.5Mbps)
Transmission Distance|

CA T5e≤100m；CA T6/6 A/7 ≤150m

USB Device

| Support printer, camera, scanner, USB flash drive, keyboard, mouse, t ouch screen…
Sw itch Extension| Supports Giga bit switches
USB Hot- Plug| Support
Operating System| Windows, MacOS, Linux, Android
USB-A|

• 4 ports USB-A input
• 1 ports USB-A output

Standard| CA T5e/CAT6/CAT6A /CAT7，Follow IEEE-568B Standard
Physical Properties
Housing| Iron
Dimensions| 76.0(L) x 60.0(W) x 21.0(H) mm
Weigh t| Tx：123g          Rx：128g
Color| Black
Power
Power Supply| TX: powered by the source device RX：DC5V/1 A
Power Consumption| TX≤2W RX≤2W
Operating Environment
Working temperature| -20～60℃
Storage temperature| -30～70℃
---|---
Humidity| 0～90%（No condensation）
Protect ion|

• ESD protection
• 1a Contact discharge level 2 (±4KV) 1b Air discharge level 3 (±8KV)
• Implementation of the standard꞉ IEC61000-4-2

Lightning protection, Surge protection
Application
Industrial Control, KVM Extension, Professional AV, Security and Monitoring, Gaming, etc.

Disclaimer
The product name and brand name may be registered trademark of related manufactures. ™ and ® may be omit ted on the user manual. The pictures in this user manual are just for reference. We reserve the rights t o make changes without further notice to a product or system described herein to improve reliability, function or design.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>