eiRa ER2662KVMIP HDMI KVM Extender User Manual

HDMI KVM EXTENDER
User ManualHDMI KVM Extender over IP (120m)
ER2662KVMIP

Important Safety Instruction

1. Do not mix up the transmitter and receiver before instruction.
2. Do not unplug the device, when it is in using, keep distance from inflammable and explosive devices.
3. Power Supply : DC 5V, Use only the supplied power supply unit, Do not use the power supply if it Is damaged.

Product Introduction

This is a HDMI KVM EXTENDER, is made up of a transmitter unit(local site) and a receiver unit(remote site). The HDMI signal can be extended up to 120 meters via network cable, and the resolution supported is up to 1080p@601-1z. It allows access to a computer system from a remote console by USB connectors(US B keyboard and mouse). It is perfect for factory and construction sites, or any type of installation where the console needs to be in a conveniently accessible location. It is a Iso useful for control and security purposes. Therefore it is widely used In command center, data control center, operation rooms in military, bank, government, enterprise etc.

Features

1. The HDMI signal transmission distance can reach 120m through the network cable.
2. Resolution supported is up to 1080p@60H z.
3. Support point to point connectionor one to manyconnection through network switch(es).
4. Support KVM function.
5. Aluminium alloy casing, stable and durable.
6. Lightning Protection, Surge Protection, ESD Protection.

Package Content

Installation Requirements

1. Source devices : PC or other devices with HDMI graphics card.
2. Display devices : With HDMI input port, SDTV, HDTV, and monitor.
3. Network cables : UTP/STP CAT5E/6 network cables, which following the standard of IEEE-568B. Transmission length: CATS 80m/CAT5E 100m/CAT 6120m.

Panel Introduction

1. HDMI EXTENDER TX (Transmitter)

the PC successfully
③| LAN signal output| Output modulated HDMI signal
④| Reset button| Restart the device
⑤| Power input| Connect with DC5V1 A power adapter
⑥| HDMI input| Connect with the source device
⑦| USB port| Connect with PC

2. HDMI KVM EXTENDER RX (Receiver)

one-to-many situation)
④| LAN signal input| Input modulated HDMI signal
⑤| Reset button| Restart the device
⑥| Power input| Connect with DC5V1 A power adapter
⑦| HDMI output| Connect with HDMI  display device
⑧| USE. port| Connect with keyboard and mouse

Installation Procedures

1. How to make a CATSE/6 network cake
   Follow the standard of IEEE-568B: 1-Orange/white
   2-Orange
   3-Green/white
   4-Blue
   5-Blue/white
   6-Green
   7-Brown/white
   8-Brown

2. Install driver Software Connect the transmitter to the computer via a USB cable, and the USB driver will be installed automatically.

3. Supported OS and version Windows 7, Windows 7 x64, Windows Server 2008, Windows Server 2008 x64, Windows Vista, Windows Vista x64, Windows Server 2003, Windows XP, Windows XP-x64, Windows 2000, Windows ME, Windows 98SE, Windows 8, Windows 10

4. General Connection
   Transmission distance can be up to 120 meters for 1080p over one CAT6

One to one connection:

One-to-many Connection: by using network router/switch, one transmitter to several receivers, realize extender and splitter function.

Switch Connection: by using network router/switch, realize unlimited extension.

NOTE :

1. Transmission distance depends on type of network cable, CATS: Wm, CAT5E : 100m, CAT6: 120m.
2. It is recommended that Gigabit Ethernet switches be used in LAN. Fast Ethernet switches (100Mbps) and Gigabit Ethernet switches (1000Mbps) can not be mixed-use in cascade.

FAQ

Q: How to use the KVM function in one-to-many connection?****

– A : Press the KVM switch of the receiver you want to use, and then the keyboard and the mouse which connect to that USB port of the receiver will work.

Q: Yellow light of Lan port is flashing quickly but no display?****

– A : 1) If source is graphics card, please set the resolution to be HDMI supported by display.
– 2) Check whether cable of Receiver is well connected.HDMI
– 3) Change the cable of Receiver.HDMI
– 4) Check whether signal correctly.HDMI source device output HDMI
– 5) Change the cable of Transmitter.HDMI

Q: Yellow Led light of Lan port is not light?****

– A: 1) Check and make sure all the cables are connected well.
– 2) Try again with shorten network cable.

Q: Abnormal color display or flashing after all the devices are well connected?****

– A: 1) Please press reset button of HDMI extender.
– 2) Make sure the network cable is made according to the standard of IEEE- 568B.

Q: Why is the keyboard /mouse not working?****

– A: 1) Please press the KVM switch of the receiver again.
– 2) Please make sure the USB cable is connected well.
– 3) restart the transmitter or receiver.
– 4) Reinstall the USB driver.

Specification

1280720@60Hz – 1360768@60Hz – 1440900@60Hz
14001 050@60Hz – 16801050©60Hz – 19201080@60Hz
Audio support| PCM (44.1 KHz, 48KHz)
HDMI connector| Type A,19 pin, Female
LAN connector| RJ-45
Operation temperature| -10 ∼60
Relative humidity| 10-95% (Non condensing)
Protection| Lightning Protection
Surge Protection
ESD Protection
Power Consumption| TX<3.5w – RX<3.5w
Dimensions| 109.6(L) x 89.5(w) x 26.3(H)mm 2pcs
Weight| TX: 240g – RX: 240g
Color| Black

Disclaimer
The product name and brand name may be registered trademark of related manufactures. ™ and ® may be omitted on the user manual. The pictures in this user manual are just for reference. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. We reserve the rights to make changes without further notice to a product or system described herein to improve reliability, function or design.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>