HAUNTeD LiViNG 4925654 Giant Animated Mummy User Guide
- June 9, 2024
- HAUNTeD LiViNG
Table of Contents
ITEM AS22093
Printed in China
GIANT ANIMATED MUMMY
HAUNTED LIVING and logo design are trademarks or registered trademarks of
LF, LLC. All rights reserved.
4925654 Giant Animated Mummy
Thank you for purchasing this Haunted Living product. We’ve created these
easy-to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item
number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
888-251-1006, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
[email protected].
SAFETY INFORMATION
BATTERY USAGE
Please keep these instructions for future reference because they contain important information.
- Keep these instructions for future reference because they contain important information.
- Batteries may explode or leak and cause burn injury if recharged, disposed of in fire, mixed with a different battery type, inserted backwards or disassembled.
- Products that contain batteries should not be disposed of in fire. The batteries inside may explode or leak.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
- Do not mix old and new batteries. Replace all batteries of a set at the same time.
- Use only batteries of the same or equivalent type as recommended by the manufacturer.
- Be sure to insert batteries with correct polarities and always follow manufacturers’ instructions.
- Remove exhausted batteries from product promptly.
- Do not short-circuit supply terminals.
- Remove batteries before storage or extended periods of non-usage.
- Clean the contacts on the batteries and the device prior to battery installation. Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are not recommended for use in this product. If rechargeable batteries are being used, however, please follow these guidelines.
- Rechargeable batteries should be removed from the product before being charged.
- Rechargeable batteries should only be charged under adult supervision.
WARNING:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna..
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FIGURE FUNCTIONALITY
(Sensor) -This switch mode will activate sound animation and lighting when
sound.
(OFF/Try Me) – This switch mode allows the item to be activated only if
triggered by using a Try Me button. The item will operate for one audio cycle
with each Try Me activation audio
(Timer) -This switch mode will be in the timer setting, the built-
in timer function will continually operate for 6 hours ON and 18 hours OFF, In
6 hours ON, lighting and movement will work per 15 sec on and off
automatically
Raise or lower the volume using the volume control turn dial; turn all the way
down to turn the volume off Estimated assembly time: 15-20 minutes Input:
100–240V 50/60Hz 0.5A Max Output: 5.9V 1.5A
PACKAGE CONTENTS
ASSEMBLY INSTRUCTIONS
- Set base (A) and pieces on a clear, flat surface, make sure the curved poles on the base face the front. Places poles (C) on the top in the holes of the base (A), and make sure the clips on the top of the poles face towards the outsides of the base (A). Places poles (D) on the top in the holes of the poles (C), and make sure the clips on the top of the poles face towards the top of the base (A), then connect the cord from the poles (C) to the cord from the poles (D).
- Put the trousers (P) on the legs. At the same time, put the end of the adapter (the other end is fixed on the back of triangle support) and the end of the TRY ME button through the trousers (the other end is connected to the back of triangle support). Places poles (E) on the top in the holes of the poles (D), and make sure the clips on the top of the poles face towards the top of the base (A), then connect the cord from the poles (D) to the cord from the poles (E). Then put the assembled parts in laying position and the front of the parts should face towards the outsides.
- Place the triangular support (F) on the top of the poles, and make sure the clips on the top of the poles face towards the outside of the base (A), then connect the cord rom the triangular support (F) to the cord from the poles (E). Place waist (I) on the top of the triangular support (F). Then untie the ropes.
- Take out the shoulder support (H) and put on the coat (O). Then connect the shoulder support (H) to the breast support (G), and make sure the clips on the top of the oles face towards the outside of the base (A), then connect the cord from the shoulder support (H) to the cord from the breast support (G).
- Connect the assembled torso to the breast support (G), and make sure the clips on the top of the poles face towards the outside of the base (A), then connect the cord rom the shoulder support (H) to the cord from the breast support (G). Pull the trousers onto the waist (I) and tie it on the triangle with the tapes.
- Place arms (K) on the sides of the shoulder support (H), and make sure the clips on the top of the poles face towards the outside of the base (A), then connect the cord rom the arms (K) to the cord from the shoulder support (H).
- Attach the left hand (M) on the left arm and the right hand (L) on the right arm, then secure the sleeves on the sides of the arms with the hook and loop fasteners. Adjust as desired.
- Attach the head (J) as shown, making sure it clicks securely into place. Then connect the cord from the shoulder support (H) to the cord from the head (J). Adjust as desired.
- The upper body of the 12-foot skeleton needs to be lifted while in its laying position. More than two people are strongly recommended for this step. There are two ropes from the triangular support (F) that will secure the item firmly to the ground using helix yard stakes, and secure the base to the ground using yard stakes. Connect poles (B) to the side of the base (A), and make sure the clips on the top of the poles face towards the top of the base (A). Unplug adapter when not in use.
CARE AND MAINTENANCE
Before using and reusing, inspect the product carefully. Discard any product
that has cut, damaged or frayed wire insulation cords, loose connections, or
exposed copper wire.
Do not discard box as it should be used for storage. Return all parts to the
original packaging.
When not in use, store neatly in a cool, dry location protected from sunlight.
FEELING CONFIDENT? START YOUR NEXT PROJECT.
Visit www.lowes.com for more information.
C 02022 GEMMY INDUSTRIES CORP. 117 WRANGLER DRIVE, SUITE 100 COPPELL,
1X 75019 U.S.A. 1877-250-9032
WWW.GEMMY.COM MADE IN CHINA!
Printed in China