eira ER2602EX HDMI Extender User Manual

ER2602EX HDMI Extender

HDMI Extender User Manual

Thank you for purchasing our HDMI Extender product. Please read the following instructions carefully to ensure optimum performance and safety.

Safety Instructions

• Do not hot plug when it is working.
• Do not mix up the transmitter unit (TX) and the receiver unit (RX), IR blaster extension cable, and IR receiver extension cable before installation.
• Use DC5V/1A power supply only. Make sure specification matched if using adapters not supplied by the factory.

Product Features

• Plug and play, without installation.
• Includes a transmitter unit (TX) and a receiver unit (RX), working as a pair.
• Transmission distance up to 120m via 5E cable, CAT6 cable, 100m via CAT 5 cable, 80m via 5 cable, CAT 4.
• Supports passback for remote control source device to receiver IR site easily.
• Uncompressed and zero latency.
• Supports resolution up to full HD 1080p@60Hz.
• Compliant with CAT5/5e/6 for long-distance transmission.

Product Usage Instructions

How to Make a CAT5/5E/6 Network Cable

Follow the standard of IEEE-568B:

1. white and orange;
2. orange;
3. white and green;
4. blue;
5. white and blue;
6. green;
7. white and brown;
8. brown.

Connection

• DVD HDMI IN Transmitter Cable Receiver HDMI Cable IR IR HDMI Display

Connection Instructions

1. Connect source device to Transmitter unit (), and display device to TX Receiver unit (cables HDMI) via RX.
2. Connect Transmitter unit () via network RX and Receiver unit (TX cables 6) CAT5e or CAT6.
3. Plug the power supplies into the devices to get started.

IR User Guide

1. IR blaster extension cable should plug in the IR OUT port of TX (Transmitter) unit of HDMI extender, and the IR receiver extension cable should plug in the IR IN port of the RX (Receiver) unit.
2. The emitter of IR blaster should be as close as possible to the IR receiver window of the signal source device.
3. Using the IR remote controller of the signal source device towards the IR receiver (connected to the RX), to remote control source media playback.

Product Specifications

• Voltage/Current Power Supply
• Power consumption
• HDMI compliance
• HDCP compliance
• HDMI resolution
• Supports audio formats
• Maximum transfer rate
• Input and output TMDS signal
• Input and output DDC signal
• Input cable length
• Output cable length
• CAT5
• CAT5E
• CAT6
• Protection Level
• Operating Environment
• Body Properties
• Electrostatic protection of the whole machine
• Working temperature
• Storage temperature
• Humidity (no condensation)
• Dimension
• Material Treatment process
• Color
• Weight

Important Safety Notice

Please read below safety instructions carefully before installation and operation:

1. Do not hot plug when it is working.
2. Do not mix up the transmitter unit (TX) and the receiver unit (RX) , IR blaster extension cable and IR receiver extension cable before installation.
3. Use DC5V/1A power supply only. Make sure specification matched if using adapters not supplied by factory.

Introduction
This HDMI Extender is a solution for transmission and extension uncompressed full HD 1080p@60Hz HDMI signal over a signal CAT5/5e/6 network cable. It includes a transmitter unit (TX) and a receiver unit(RX), working as a pair. Long transmission distance is up to 120 meters with zero latency. This HDMI Extender support IR pass back for remote control source device from receiver site easily.
This product is perfect for AV transmission in applications of HD conference system, HD video shooting, HD multimedia education system, HD digital advertising and signage etc.

Features

1. Plug and play, without installation.
2. Include a transmitter unit (TX) and a receiver unit (RX), working as a pair.
3. Transmission distance up to 120m via 5E cable, CAT6 cable, 100m via CAT 80m via 5 cable.CAT
4. Support passback for remote control source device to receiver IR site easily
5. Uncompressed and zero latency.
6. Support resolution is up to full HD 1080p@60Hz.
7. Compliant with CAT5/5e/6 for long distance transmission.

Package Contents

Installation Requirements

1. HDMI source device(computer graphics card, DVD,PS3, HD monitoring equipment etc).
2. port. HDMI, projector with HDTV, SDTV display device like HDMI
3. IEEE5/5e/6 cable, follow standard CAT STP/UTP‑568B.

Panel Description

1. Transmitter unit(TX)
   1| Reset button| Restart the unit
   ---|---|---
   2| RJ45 signal output| Connect with network cable
   3| LINK indicator| LED turns on all the time with HDMI signal
   transmission, flashes with no signal
   transmission
   4| Power input| Connect with DC5V1A power adapter
   5| HDMI signal input| Connect with source device
   6| IR signal output| Connect with IR blaster extension cable

2. Receiver unit (RX)

transmission, flashes with no signal transmission
4| Power input| Connect with DC5V1A power adapter
5| HDMI signal output| Connect with display device
6| IR signal input| Connect with IR receiver extension cable

Installation and Connection

1. How to make a CAT5/5E/6 network cable Follow the standard of IEEE-568B꞉
2. White and orange;
3. Orange;
4. White and green;
5. Blue;
6. White and blue;
7. Green;
8. White and brown;
9. Brown.
10. Connection
11. Connection instruction
12. Connect source device to Transmitter unit (), and display device to TX Receiver unit ( cables HDMI) via RX
13. Connect Transmitter unit () via network RX) and Receiver unit (TX cables (6)CAT5e or CAT5,CAT
14. Plug the power supplies into the devices to get started.
15. IR User Guide
16. IR blaster extension cable should plug in the IR OUT port of
17. TX (Transmitter) unit of HDMI extender, and the IR receiver extension cable should plug in the IR IN port of the RX(Receiver) unit.
18. The emitter of IR blaster should as close as possible to the IR receiver window of the signal source device.
19. Using the IR remote controller of the signal source device towards the IR receiver (connected to the RX ), to remote control source media playback

FAQ

Q꞉ No image output?

1. A꞉ Check and make sure all cables are connected well;
2. Restart the TX/RX by RESET button.

Q꞉ RX LINK indicator is flashing all the time

1. A꞉ Make sure network cable connection follows the standard of IEEE568B
2. Check whether transmitter has HDMI signal input
   Reset transmitter and receiver and reconnect.

Q꞉ Receiver “LINK” led lights on all the time but no image output?

1. A꞉ Make sure the monitor supports the current HDMI signal mode;
2. Make sure HDMI cable is well connected with TV
3. Make sure the network cable is fine copper wires.

Specification

Disclaimer
The product name and brand name may be registered trademark of related manufactures. ™ and ® may be omitted on the user manual.
The pictures in this user manual are just for reference. The terms HDMI, HDMI High‑Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
We reserve the rights to make changes without further notice to a product or system described herein to improve reliability, function or design.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>