eira ER2644SP 4K60Hz HDMI Splitter User Manual
- June 10, 2024
- eira
Table of Contents
HDMI SPLITTER
User Manual
HDMI SPLITTER 1×8 (4K60Hz)
ER2644SP
IMPORTANT SAFETY INSTRUCTIONS
Please read below safety instructions carefully before installation and operation:
- Please pay attention to all the warnings and hints on this device.
- Do not expose this unit to rain, moisture, and liquid.
- Do not put any stuff into the device.
- Do not repair the device or open the enclosure without professional person guidance to avoid electronic shock.
- Make sure good ventilation openings to avoid product overheating damage.
- Shut off power and make sure environment is safe before installation.
- Use DC12V only. Make sure the specification matched if using 3rd party DC adapters.
Introduction
1×8 HDMI splitter distributes 1 HDMI source to8 HDMI displays simultaneously. Apply forSTB, DVD, Media Player, Laptop, D-VHS and other HD-Player devices. It’s Compatible with HDMI 3D and 4Kx2K.
Features:
- Distribute 1] HDMI source to 8 HDMI displays
- Support ultra HD resolution 4Kx2K@60Hz
- Support HDMI 3D
- Support YUV 4:4:4
- Support HDR
- HDMI 2.0 and HDCP2.2 compliant
- Low power consumption
- Support configures the video resolution automatically according to the capabilities of each connected monitor, allows simultaneous mixed 4K and 1080p display outputs
- Plug and play
Package Contents
Installation Requirement
- Source: HDMI video source, suchas DVD, PS3, STB, PC, Etc.
- Display: HDTV, projector or other display with HDMI port
- HDMI cable: HDMI12.0 standard cable (can support 4Kx2K@60Hz)
Panel Description
Installation and Connection
-
Connection
-
Connection instruction****
-
Connect the HDMI video source output port to the splitter input port by HDMI cable
-
Connect the splitter output port to HDMI display by HDMI cable
-
Power on the splitter(Power indicator led will light on)
-
Operation
-
Before output HDMI signal, the splitter will read EDID information of connected TVs and send it back to HDMI source part to let it determine the output mode
-
Indicator led shows the working status
-
The splitter build-in 16 kinds of EDID, select by 4 switch codes, corresponding as following
Switch up for“1” Switch down for “0”
Switch Status | 1 | 2 | 3 | 4 | EDID information |
---|---|---|---|---|---|
0 | 0 | 0 | 0 | 4k@60Hz 2CH | |
1 | 0 | 0 | 0 | 4k@60Hz 7.1CH | |
0 | 1 | 0 | 0 | 4k@30Hz 2CH | |
1 | 1 | 0 | 0 | 4k©30Hz 7.1CH | |
0 | 0 | 1 | 0 | 1080pg60Hz 2CH | |
1 | 0 | 1 | 0 | 1080p@60Hz 7.1CH | |
0 | 1 | 1 | 0 | 10801@60Hz 2CH | |
1 | 1 | 1 | 0 | 10801@60Hz 7.1 CH | |
0 | 0 | 0 | 1 | 1080pg50Hz 2CH | |
1 | 0 | 0 | 1 | 1080P@5OHz 7.1CH | |
0 | 1 | 0 | 1 | 4K®30Hz HDR | |
1 | 1 | 0 | 1 | 4K@60Hz HDR | |
0 | 0 | 1 | 1 | Copy once | |
1 | 0 | 1 | 1 | MIX1 | |
0 | 1 | 1 | 1 | MIX2 | |
1 | 1 | 1 | 1 | MIX3 |
[NOTE] Copy Once: Read the EDID of the first connected output only
MIX1 : Lowest format of audio, and lowest format of video
MIX2 : Highest format of audio, and compose down scaling of video
MIX3 : Lowest format of audio, and compose down scaling of video
FAQ
No image output
- Check the power supply of splitter, make sure the power light is on.
- Check if the HDMI cables connected firmly.
- Check and make sure the TV has been Set up to the right channel
- While connect with PC or notebook via HDMI, please make sure the output mode is mirror or extend.
6.2 Display is unstable, splash screen, snowflakes or audio stuck.
- Check and make sure all connections are good and correct.
- Try to directly connect HDMI source to display, if it is the same, please change the source device.
- Use high-quality HDMI 1.4 cable for transmitting 4Kx2K UHD signal.
Display can not output 4Kx2K UHD image when all connections are correct?
- Check and make sure the input sources are 4Kx2K@60Hz UHD signal.
2 ) Check and make sure the TV is Support 4Kx2K@60Hz resolution. - Check ifthe HDMI cables are compliant HDMI12.0 standard.
Display can not output HDR effect image when all connections are correct?
- Check and make sure the input sources are support HDR effect.
2 ) Check and make sure the TV is Support HDR effect image.
Specification
Items | Specifications |
---|---|
Input ports | 1 x HDMI |
Output ports | 8 x HDMI |
Power indicator led | 1 xLED |
Signal indicator led | 8 xLED |
HDMI Version | Compatible with HDM11.4,HDM12.0 |
HDCP Version | Compatible with HDCP1.4,HDCP2.2 |
HDMI Resolution | 480i/480p/576i/576p/720p/10801/1080p/ 4Kx2K@24/25/30/60Hz |
Frequency Range | 25MHz-600MHz |
Video form | Support 3D video and 4Kx2K@30/60Hz ultra HD video |
Input and output TMDS signal | 0.7-1.5Vp-p(TMDS) |
Input and output DDC signal | 5Vp-p(TTL) |
Audio | Support standard audio and DSD ( Direct Stream Digital ) and HD(HBR) |
audio
HDR| Support
EDID management| Support smart EDID management, available to display different
resolution monitors at the same time
Working temperature| 0°C — 60°C
Power supply| 12V/1A
Power consumption| <8W
Dimension| 262mm (L)x81.6mm(W)x23.5mm(H)
Weight| 453g
Color| Black
Disclaimer
The product name and brand name may be registered trademark of related
manufactures. ™ and ® may be omitted on the user manual.
The pictures in this user manual are just for reference. The terms HDMI, HDMI
High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc.
We reserve the rights to make changes without further notice to a product or
system described herein to improve reliability, function or design.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>