AUX FREEDOM ECO WiFi-Modul Freedom Owner’s Manual

AUX FREEDOM ECO WiFi-Modul Freedom

Product Information

The product is a WI-FI enabled air conditioner that allows users to control and manage the device using a smartphone, tablet, or other mobile terminals. It comes with a control software called AC Freedom that needs to be downloaded and installed on the mobile terminal. The air conditioner also has a WI-FI module inside that needs to be reset in certain situations.

Introduction to WI-FI Functions

The product allows users to connect their mobile terminals to WI-FI or a hotspot, enabling them to control the air conditioner remotely.

Download and Install the Control Software

To download and install the control software:

1. For Android devices (version 4.1 and above) or iOS devices (version 6.0 and above), search and download AC Freedom from Google Play or App Store and install it on your system.
2. Alternatively, you can use a third-party scan tool on your Android or iOS device to scan the QR code provided in the manual. This will automatically direct you to the download interface of AC Freedom for software installation.

Reset AC WI-FI Module

In case of first-time configuration or after changing the connected wireless router, the WI-FI module inside the air conditioner needs to be reset. To reset the module:

1. Press the HEALTH key on the remote control for 8 times within 5 seconds after turning on the air conditioner.
2. The reset is confirmed when you hear two beeps from the buzzer.

Smartphone, Pad or Other Mobile Terminals Connect to WI-FI or Hotspot

To connect your mobile terminal to WI-FI or a hotspot:

1. Activate the WI-FI function on your mobile terminal.
2. Connect your mobile terminal to a wireless router or an access point.
3. Note: A wireless router is required for the WI-FI function to work. If you don’t have one, please purchase it separately.

Configure the Devices

After downloading and installing the control software on your mobile terminal, follow the instructions in the manual to configure the AC devices using the provided control software.
Please refer to the user manual for more detailed instructions and information.

• Please read this owner s manual carefully and thoroughly before operating the unit!
• Take care of this manual for future reference.

Introduction to WI-FI Functions

• The AC system is equipped with remote control technology, with the WI-FI module inside the machine connected to the display panel and the command to run the AC transmitted.
• The AC system is in constant connection with a wireless router or access point attached to the Internet.
• Mobile terminals such as smart phones and tablet computers, on which special control software are installed and WI-FI modules successfully configured locally, can be used as remote controllers once they are connected to the Internet.

Download and install the control software

The control software can be downloaded and installed as follows.

1. For mobile terminals such as smart phones and tablet ( Android 4.1 and iOS 6.0 or above only), search and download “AC Freedom” from Google Play or App store on and install it on your system.
2. You may also use your mobile terminal (Android 4.1 and iOS 6.0 or above only) to scan the “QR code” (see Fig.1) with a third party scan tool, which will automatically direct you to the download interface of AC Freedom for you to download and install the software.

• Once the control software is installed, enter the “Scanning Interface”(for downloading the Welcome Page).There are two types of log-ons contained in the Scanning Interface(See Fig.2):

1. By clicking “scan” and scanning the QR code on the right .(See Fig.3)
2. By entering the activation code (6364d) in the area prompted by“enter activation code”(see fig.4)

Reset AC WI-FI module

• In the case of first time configuration or after changing the connected wireless router is, the  WI-FI module inside the air conditioner needs to be reset.

To reset the module:

• Press the “HEALTH” key on the remote control for 8 times (see Fig.5) within 5 seconds after the air conditioner is turned on. The reset is not done until you hear two beeps of the buzzer.

Note:

• The remote control provided in this figure is just one of many models which is for your reference only. Please rely on the model you have actually bought, though the operations are the same for all models.

Smartphone ,pad or other mobile terminals connect to WIFI or hotspot

• Activate the WI-FI function of the mobile terminal and connect it to a wireless router or an access point.
• Note:
• A wireless router is required for the WI-FI function to work. Please purchase one if you do not already have one.

Configure the Devices

• After the control software is downloaded and installed on the mobile terminal, configure the AC devices according to the following figure.

Note:

1. In the case of first time configuration or after the connected wireless router or access point is changed, make sure the mobile terminal is already connected to the wireless router or access point to be paired with the WI-FI module.
2. If the configuration is failed, press “Config faild check items” to check the notes about the failure before reconfigure the AC.

After the configuration is successful, click the corresponding AC name to enter the control interface for further operation.

Manage the Devices

1. Modify and Lock the Devices
   • In the “Device List” interface, press and hold for more than 0.5 second (for Android system )or press (for IOS system) the icon of an existing device to activate the modify the name” interface.
   • You can change the name or the icon, to identify different AC devices.
   • To lock a device, simply touch the “Locking Device” icon. Once a device is locked, other users won’t be able to search for it, thus preventing it from hostile control. After the configurations of the AC device names, icons and locking status are complete, touching “Save” will save and validate them.
2. Delete an AC under control
   • For Android: Click “Delete Device” button under “Modify the name” in Fig.7.
   • For IOS: Swipe over the AC name to the left under “Device List” and click “Delete”.
3. Remote control with wireless router
   • Once the wireless router is connected to the Internet, activating the GPRS on the mobile terminal will enable the remote control of the devices.

Others

1. The software provides help service through which the users may check the operational instructions of the software and other information.
2. Besides, as the operation interface and the function of the software is under constant improvement, we will keep you informed about the subsequent upgrades for your updating.
3. As the operation interface may change due to the constant version upgrading, the figures in this manual are for reference only, so please rely on the actual operation interface.

Appendix A: <>

1. Please check the Wi-Fi icon on the air conditioner panel, if the icon not display please contact customer service.

2. Please make sure the mobile phone network under the current router WI-FI environment: Close the mobile phone 3G/4G data connection, to be connected to the router WI-FI pairing.

3. Please check whether the module reset successfully: Press the button health on the remote controller 8 times to reset, a “drip drip ” sound said reset successfully.

4. Please check the Wi-Fi name of the router, recommended not contain spaces and other non-alphanumeric characters.

5. Please check the Wi-Fi password of the router, not allowed more than 32 bits, recommended not contain spaces and special symbols in addition to letters
   and numbers.

6. Please check whether the Wi-Fi password input is correct when APP configuration：you can check show password to confirm when input the WI-FI password.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>