iclever BTH19 Wireless Headphone User Manual

BTH19 Wireless Headphone
User Manual Model :BTH19
Ver.2023.04.17

Package Contents

| 1 x iClever BTH19 Wireless Headphones
---|---
| 1 x User Manual
| 1 x 3.5mm Audio Cable
| 1 x USBType•C Cable

Product Diagram

ON/Off

1. Power on: Switch the button to the “ON”direction.Then the LED indicator flashes blue for 1 second, and the colorful lights are on
2. Shutdown: Switch the button to”OFF”direction, and the head-phone is turned off. The LED indicator flashes blue for 1 second and then goes off. c

Bluetooth Pairing

1. In the power-on state, switch the button to the”ON”direction; the colorful lights are on; Bluetooth enters the pairing state, and the red and blue lights flash alternately
2. Turn on the Bluetooth of the mobile phone. Then find and select the “iClever-BTH19” Bluetooth pairing name in the device list for Bluetooth pairing connection.

Light On / Off

Short press the “Light On / Off” button to turn on / off the light.

Volume Limit Gear Switching

1. Press and hold the”+”&”-” buttons at the same time to switch the volume limit to 74dB, and the voice broadcast to”74dB”.
2. Press and hold the”+”&”-” buttons at the same time to switch the volume limit to 85dB, and the voice broadcast to”85dB”
3. Press and hold the”+”&”-” buttons at the same time to switch the volume limit to 94dB, and the voice broadcast to”94dr

Operation of Buttons

simultaneously for 4 seconds in the power-on state to clear the pairing list. Then the headphone will automatically enter pairing state.

Voice Prompt

Specification

How to Charge the Headphone

Connect the Type-C cable to the Type-C port on the headphone, and a 5V power outlet (power adapter is not included). The indica-tor light will glow red to indicate charging. When the headphone is fully charged, the indicator light will change from red to blue.

Warning

1. If the product is damaged, please stop using it
2. When the charging cable USB interface is hot, please replace it in time
3. Keep away from high temperature and fire sourceand a 5V p

FCC Statement

Changes or modifications not expressly approved by the party re-sponsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the lim-its for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular instal- lation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Hereby, Thousandshores Deutschland GmbH declares that the radio equipment type Wireless Headphones BTH19 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration conformity is available at the following internet address: http://filesiclever.com/BTH19-DOC-EN.pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>