LED WORLD SF10TL2 Clear Dice Strip to Strip Corner Connector Instructions
- June 12, 2024
- LED WORLD
Table of Contents
Clear Dice Strip to Strip Corner Connector SF10TL2
Instructions
SF10TL2 Clear Dice Strip to Strip Corner Connector
CAUTION: Max 3 Amps 12/24VDC (low voltage). Use only with Class 2 power
supply. Indoor dry location use.
ATTENTION: Utiliser seulement avec la classe 2 bloc d’alimentation.
For use only with LED World’s type A (IP20) 12VDC and 24VDC 10mm wide LED Flex
Strips. Not to be used with Type B or C (Strips that have covers or coatings).
Important Note: Check the Polarity and make sure that connector contact
points are directly over (and centered) the LED Flex Strip connector pads. Do
not connect LED strips at soldered contact points.
STEP 1
STEP 2
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version
1.0 – 07/13/2023
Copyright @2023 LED WORLD INC™. All Rights Reserved. We are not responsible
for errors or omissions.
Product and specifications subject to change without notice. Registered
trademarks are owned by their respective registers, or licensee(s).
ledworldlighting.com |
ledworld.ca
1-800-387-4081
References
- LED World Canada - A Commercial LED lighting supplier
- LED World Lighting - A Commercial LED lighting supplier