iHome iBT64 Soundboost Bluetooth Mini Speaker Instruction Manual
- June 12, 2024
- iHome
Table of Contents
iHome iBT64 Soundboost Bluetooth Mini Speaker
Buttons and Functions
- POWER/PLAY/PAUSE/SPEAKERPHONE: Press and hold for 3 seconds to turn ON/OFF. Short press to play/pause audio. Short press to answer or end a call / long press for 2 seconds to reject call. Last redial by pressing the power button twice in a row.
- VOLUME DOWN/PREVIOUS TRACK: Long press and hold the – button to decrease volume. Short press the – button to skip to previous track.
- VOLUME UP/NEXT TRACK: Long press and hold the + button to increase volume. Short press the + button to skip to next track.
- LIGHT MODE/MICRO SD MODE (insert a micro SD card to play audio): Short press the M button to activate RGB light mode. Long press and hold the M button to toggle SD/Bluetooth modes. Micro SD mode is compatible with .mp3 files only and up to 32GB Micro SD cards.
- TRUE WIRELESS PAIRING (TWS) (REQUIRES 2 SPEAKERS): Steps to pair two iBT64 units for true wireless stereo audio.
Model: iBT64
POWER/PLAY/PAUSE/SPEAKERPHONE
- Press and hold for 3 seconds to turn ON/OFF
- Short press to play/pause audio
- Short press to answer or end a call / long press for 2 seconds to reject call Last redial: Presss the power button twice in a row.
BLUETOOTH Pairing
- When you power the speaker ON, it will automatically enter pairing mode
- Select ‘iHome iBT64’ on your Bluetooth device to connect
- A sound prompt will confirm when the speaker is connected
VOLUME DOWN/PREVIOUS TRACK
- Long press and hold the “-” button to decrease volume
- Short press the “-” button to skip to previous track
VOLUME UP/NEXT TRACK
- Long press and hold the “+”button to decrease voloume
- Short press the “+” button to skip to next track
LIGHT MODE/MICRO SD MODE (insert a micro SD card to play audio)
- Short press the “M” button to activate RGB light mode.
- Long press and hold the “M” button to toggle SD/Bluetooth modes. A voice prompt confirms active mode. Note: Micro SD mode is compatible with .mp3 files only and up to 32GB Micro SD cards.
TRUE WIRELESS PAIRING (TWS) (REQUIRES 2 SPEAKERS)
- Pair one iBT64 unit to your device via Bluetooth.
- Power on the second iBT64 unit.
- Presss the “M”button twice before connecting the phone (speaker light will blink green).
- When both units are linked, the speaker light showing blue long times, and will announce ‘Left Channel/ Right Channel’.
- If TWS linking fails, speaker light flash RED 3 times.
- Both units will link TWS automatically next time both units are powered on within 1 minute of each other.
- Cancel TWS pairing: Press the “M” button twice before connecting the phone.
- To disconnec TrueWireless, reset BT pairing: Press the “+”button twice in a row.
CHARGING THE SPEAKER
REAR PANEL
NOTE: As per illustration, insert Micro SD card completely in the speaker until it clicks. To remove, press in slightly to disengage and pull out
LED STATUS INDICATORS
BATTERY STATUS
BLUETOOTH STATUS
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.
- Do not use this product near water.
- Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this product during lightning storms or when unused for long periods of time.
- Damage Requiring Service – This product should be serviced by qualified service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally.
- No naked flame sources, such as lighted candles, should be placed on this product.
- Attention should be drawn to the environmental aspects of battery disposal.
- This product is suitable for use in tropical and/or moderate climates.
WARNING:
- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
- Do not dispose of batteries in the household trash or fire.
- The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.
- If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage.
- Always use a UL/ETL certified charging adapter (not included), and the supplied USB charging cable.
INTERNAL RECHARGEABLE LITHIUM-ION BATTERY
This device uses an internal non-replaceable rechargeable lithium-ion battery
that should last the lifetime of the device. If you suspect your battery may
be dead, try charging it for an extended period of time and try resetting the
unit.
WARNING/DISPOSAL OF UNIT
Do NOT attempt to change the battery. Doing so will void the warranty and
could cause injury and damage to your device. To dispose of the unit, follow
the instructions below:
- Never dispose of used batteries/electronics with ordinary solid wastes, since they may contain toxic substances.
- Always dispose of used batteries/electronics in accordance with the prevailing community regulations.
- Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-off location near you, visit www.call2recycle.com
GENERAL BATTERY PRECAUTIONS
- Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
- Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances.
- Avoid charging a rechargeable battery when the temperature is not within 5°C – 35° C (41° – 95° Fahrenheit).
- Never expose a battery to any liquid.
- Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered.
- Always keep batteries out of the reach of infants and small children.
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Information
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler l’autorité de l’utilisateur à utiliser l’équipement.
WARRANTY
1 YEAR WARRANTY
© 2023 SDI Technologies, Inc. All rights reserved
iBT64 – Instruction Sheet – English (Dong Shun)
Color: Black text on white paper (1C + 1C)
Size: 102 x 150 mm
Material: 85 gsm wood free paper June. 05, 2023 v2