Pyle PBMSPRG4 Boombox Speaker User Manual

Pyle PBMSPRG4 Boombox Speaker

Please take the time to read this manual carefully before you begin using your new device. Any content revision of the manual won’t declare again, and we are not responsible for consequence caused by fault or oversight of this manual.

FEATURES

• Compact Boom Box Stereo Style
• Portable Travel-Friendly Speaker Design
• Digital Streaming FM Radio
• Built-in Rechargeable Battery
• MP3 Digital Audio File Playback
• Ported Enclosure for Extended Bass
• Full Range Stereo Sound Reproduction
• Rugged & Durable ‘Super Tube’ Speaker Housing

Product Description

• 1. ON/OFF
• 2. USB port
• 3. Charging jack
• 4. PREVIOUS/volume down
• 5. NEXT/volume up
• 6. Aux-in jack
• 7. MODE (Wireless BT Switch, USB disk, FM and AUX-IN state)
• 8. Play/Pause

Wireless BT Streaming

1. Turn the power button to “ON”. The LED light turns blue and blinks quickly and beep’s twice. The colorful lights will be lit automatically.
2. Activate Wireless BT of your mobile phone and search for the device name “PyleUSA” then connect it. The blue LED light blinks slowly and will beep three times once connected.
3. Play the music from your mobile phone and enjoy.
4. Press Previous or Next button on the device or on Mobile phones to select songs you like.
5. Press Play/Pause button on the device or on Mobile phones to play/pause the music.
6. Press and hold PREVIOUS or NEXT button to adjust volume down and up or adjust the mobile phones’ volume.

Playing music from USB disk

1. Turn the Power button to “ON”.
2. Insert USB flash disk into slot, the music stored will be played automatically and blue LED will blink slowly.
3. Under playing mode, short press Previous or Next button to select songs you like, or press and hold the Previous or Next button to adjust volume down and up.
4. PLAY/PAUSE to play or pause music.
5. Please turn the Power button to “OFF” if you will not use it.

Remark: Under Wireless BT playing mode, inserting the USB will disconnect the Wireless BT and switch to play the USB. You can press the MODE button to switch to Wireless BT mode again.

How to Use FM Radio

1. Under FM radio state, the audio cable provided is the antenna. Please insert the audio cable to get the best FM signal before using.
2. Turn the power button to “ON”, press the “MODE” button to switch to FM radio state.
3. Under playing mode, short press “Play/Pause” button to auto search the FM Channel and store it automatically.
4. Press Previous or Next button to change the stored FM channel.

AUX-IN

For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux In” of this device. Then press the “MODE” button, the speaker will prompt “Aux Input Mode”, then Enjoy.. When using an external device, all functions can be controlled by the external device.

TWS Function

1. Turn ON two identical speakers you want to pair, please be noted that they must have the same BT paring name, both under BT mode. You only need to set up one of the two units;
2. Press and hold “Mode” button then the speaker will make a tone “di” to start pairing, and will make “di” voice for 3 times once successfully paired;
3. Connect Wireless BT with your mobile phone to play music by the two paired Speakers to create more powerful surround sound effect.
4. If you want to exit the TWS mode, press and hold “Mode” button (of the unit that you set at beginning) again to exit the TWS function.

Remark: Under the TWS mode, if you connect your mobile phone to the unit (you set at beginning) via the provided audio cable, it will start to play AUX via TWS function, under this status, you can not switch to Wireless BT mode by pressing the Mode button.

Colorful LED display and off:

This unit will display colorful pulsating bright lights when the music is ON. To turn ff the light, please push the Play/Pause button for 5 seconds.

Remarks:

1. Press the MODE button to switch for different modes, the order is Wireless BT, USB disk, FM radio and AUX-IN.
2. Turn the power button to “OFF” to turn off the power supply if you will not use it.

Battery Charging

1. Power OFF the unit, put the provided charger cable into the charging slot of the unit, connect the other end to your PC or other charger with DC5V output (Not included), the red charging indicator light will be lit.
2. Charging time should be 4-5 hours. When fully charged, the indicator light will switch off.
3. In order to prolong the battery life, please do not charge more than 8 hours.

Questions? Issues?

We are here to help!

• Phone: (1) 718-535-1800
• Email: support@pyleusa.com
• www.PyleUSA.com
• PyleUSA.com

VISIT US ONLINE:

• Have a question?
• Need service or repair? Want to leave a comment?
• PyleUSA.com/ContactUs

This product can expose you to a chemical or group of checmicals, which may include ”Cadmium (Cd)” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.

FAQs

How do I connect my device to the speaker using Bluetooth?

Can I play music from a USB disk?

Yes, insert a USB flash disk into the slot, and the music will play automatically.

How do I use the FM Radio feature?

How do I connect other devices using the AUX-IN feature?

Use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux In” of the speaker. Press the “MODE” button, and the speaker will prompt “Aux Input Mode.”

What is the TWS Function?

TWS Function allows you to pair two identical speakers to create powerful surround sound. Turn both on, press and hold “Mode” on one of them, and connect via Bluetooth.

How do I charge the speaker?

Power off the unit, connect the provided charger cable to the unit, and the other end to a DC5V output charger. A red indicator will light up, and it should be fully charged in 4-5 hours.

Can I turn off the colorful LED display?

Yes, to turn off the light, push the Play/Pause button for 5 seconds.

How do I switch between different modes?

Power off the unit, connect the provided charger cable to the unit, and the other end to a DC5V output charger. A red indicator will light up, and it should be fully charged in 4-5 hours.

How long should I charge the speaker?

The charging time should be 4-5 hours, and it's advisable not to charge for more than 8 hours to prolong battery life.

How does the speaker handle volume controls?

You can press and hold the PREVIOUS or NEXT button to adjust the volume up and down, or you can control the volume from your connected device.

Can I connect the speaker to a device without Bluetooth?

Yes, you can connect the speaker using the AUX-IN jack with the supplied audio line cable or play music from a USB disk.

Download this PDF Link:Pyle PBMSPRG4 Boombox Speaker User Manual-f571-4dc5-803e-f6b25f45d72b

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>