anslut 024375 Remote Circuit Breakers Smart Instruction Manual
- June 12, 2024
- anslut
Table of Contents
anslut 024375 Remote Circuit Breakers Smart
Important! Read the user instructions carefully before use. Save them for future reference. Jula reserves the right to make changes. For latest version of operating instructions, see www.jula.com
SYMBOLS
| Conform with the requirements in the relevant EU Regulation/ directives.
---|---
| Recycle a discarded product in accordance with applicable regulations.
TECHNICAL DATA
Rated voltage 230 V, 50 Hz
Rated current 10 A
Max load 2300 W at 230 V
Output in standby mode <1 W
Frequency 2.4 GHz
Protection rating IP20
**Operating temperature* –10 to 35°C
Wireless connection** Wi-Fi 2.4 GHz IEEE 802.11 b/g/n
*The operating temperature of this product will not reach 45 °C
DESCRIPTION
This is a SMART product that can be connected to existing WiFi and controlled via the app Smart Life, or with a voice assistant. Does not require a separate hub/ router. You can control all SMART products in the app and use functions such as timer control, scheduling and automatised events.
SYSTEM REQUIREMENTS
WiFi router. iPhone, iPad (IOS 11.0 or higher) or Android (5.0 or higher).
Compatible with Google Assistant, Amazon Alexa and others.
USE
INSTALL APP
Scan the QR code to download the Smart Life app. Or search on App Store or
Google Play. FIG. 1
Register your account with mobile number or email address. You will the receive a verification code via SMS or email. Enter the code in the app and select password. If you already have an account, log in with the mobile number or email address and password. **FIG. 2
**
CONNECT PRODUCT
-
Check that the phone is connected to your WiFi.
-
Plug the product into a power point. FIG. 3
-
Press the button until the status light shows a flashing blue light. This shows that the product is connected. (If you want to change the network the product must be removed and replaced in the network outlet three times. The status light will then show a flashing blue light to show that the product is connected.) FIG. 4
-
Press + (add unit) on the start page in the app. FIG. 5
-
Enter WiFi password. Click on Confirm.
-
The product can be switched on/off and the timer and countdown timer can be set.
-
Click in the top right corner to show detailed information on the unit, to change the unit name, upgrade software, remove the unit, etc.
EU DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer
RECIEVER PLUG IN EN
Conforms to the following directives, regulations and standards:
| Directive/Regulation | Harmonised standard |
|---|---|
| RED 2014/53/EU | EN IEC 61058-1:2018, EN 61058-1-1:2016, EN IEC 62311:2008, EN |
301489-1 V2.2.3, EN 301489-3 V2.1.1, EN 301489-17 V3.2.4
IEC 60884-2-5:2017, IEC 60884-1:2002+A1+A2, SFS 5610:2015+A11, NEK 502:2016, SS 4280834:2013+T1, DS 60884-2-D1:2017, EN 62479:2010, DIN VDE 0620-2-1:2016+A1
RoHS 2011/65/EU + 2015/863| EN 50581:2012
This product was CE marked in year
Signed for and on behalf of
Fredrik Bohman
BUSINESS AREA MANAGER