Bebe Stars 255-182 Electric Swing Imagine 2 in 1 Brown User Manual

Bebe Stars 255-182 Electric Swing Imagine 2 in 1 Brown

SAFETY GUIDELINES

Read this instruction carefully before using and keep it for future reference.

Failure to follow these warnings and the assembly instruction could result in serious injury or death.

Products need to be installed by adult and used under adult’ ssupervision.

1. Use for babies with maximum weight 9kg.
2. Do not use the product if any parts are broken, torn or missing and use only spare parts approved by the manufacturer.
3. Always use harness. Do not move or lift this product with the baby inside it.
4. Do not let children play with this product.
5. It is dangerous to place this product on an elevated surface. Always use on a flat, level floor.
6. To avoid injury ensure that children are kept away when unfolding and folding this product.
7. Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc. In the vicinity of the product.
8. This product does not intend for prolonged period of sleep. Should your child need to sleep, then place the child in a suitable cot or bed.
9. Do not use the product without the seat cushion.
10. Do not place the swing near windows or walls, where strings, curtains or other objects may be used by the child to climb out of the swing seat, and to prevent the risk of suffocation or choking.
11. Do not place the swing near windows or walls, to prevent the child from affecting the
    stability of the swing, making it topple over, by pushing with his feet against the wall.

Never leave child unattended

PARTS LIST

A.Main Control Pad (Fig A)

• A1. Control pad
• A2. Seat mount
• A3. Quick release button
• A4. Battery box
• A5. Power socket

B.Bottom frame tube left/right(Fig B)

• B1. Bottom tube right
• B2. Bottom tube left
• B3. Shrapnel
• B4. Sticker A1
• B5. Sticker B1
• B6. Sticker C1
• B7. Notch

C. Support Frame (Fig. C)

• C1. Lock pin
• C2. Sticker C
• C3. Button
• C4. Buckle

D. Seat support group (Fig. D)

• D1. Sticker A
• D2. Sticker B
• D3. Hole A/Hole B
• D4. Iron support tube
• D5. Sticker D
• D6. Sticker E
• D7. Adjustment button
• D8. Adjustment joint

E. Front seat frame tube (Fig E)

• E1. Shrapnel head
• E2. Sticker D1
• E3. Vibration box
• E4. Toggle switch

F. Back seat frame tube (Fig. F)

• F1. Shrapnel Head
• F2. Sticker E1
• F3. Toy Holder

G. Toy stand (Fig. G)

• G1. Toy
• G2. Buckle

H. Instructions(Fig H)

• H1. Manual
• H2. Power adapter
• H3. Remote control

K. seat cover(Fig. K)

• K1. Seat cover
• K2. Cusion
• K3. Pillow
• K4. Cross belt
• K5. Seat belt
• K6. Shoulder belt
• K7. Safety buckle
• K8. Button 1
• K9. Button 2
• K10. Zipper
• K11. Shoulder belt buckle
• K12. Fixed buckle

Assembly of the rocking chair

Assemble bottom frame tube left/right of the seat frame:

Take out the parts shown in (Fig. B) and (Fig. D), and make sure that the orientation is the same as that shown in (Fig. 1) when assembling. A to A1 and B to B1 are inserted into the corresponding Hole A/ Hole B(Fig. D1-D3). ), and then slowly push a part of it to the position shown in (Fig. 2) step 1, push it into the tube with the method shown in (Fig. 2) step 2, and then use (Fig. 3) step 1. First press the shrapnel head to assist push, and finally use (Picture 3) step 2 method to push inwards and left at the same time, until you hear a click as shown in (Fig 3) step 3. WARNING: (Fig 3) The three clicked shrapnel heads shown in step 3 (Fig B1-B3) must all pop out, indicating that they are in Position!

Assemble the base frame support tube:

Take out the parts shown in (Fig. C), and make sure to assemble it in the same direction as the one shown in (Fig. 4), and assemble C to C1 as shown in step 1 (Fig. 4), first use (Fig. 4) step 2 method to assemble Press and hold the lock pin (Fig. C1/C1)) so that the lock pin can be smoothly installed into the two buckles (Fig. B1-B7), as shown in step 3 (Fig. 4), the lock pin enters the buckles and then press down as shown in ( Fig 4) As shown in step 4, until you hear a click as shown in (Fig 6); Warning: After assembling the support tube, it is necessary to check that the button (Fig C-C3) is installed in postion, the position of the button shown in (Fig 5) is incorrect, and the lock pin cannot be used if it is not locked in position! (Pig 6) The position of the button shown is correct, indicating that the lock pin is locked in position and can be used normally! Please make sure to use it correctly!

Assemble the seat tube front/back:

Take out the parts shown in (Fig E&F), and make sure that they are in the same direction as the position shown in (Fig 7) when assembling. Assemble the front of the seat bracket tube with D1 to D, and put D1 into D until you hear a sound of click. The click sound is as shown in (Fig. 8) The shrapnel (Fig. E1-E1) has popped out, indicating that it has been assembled in position. Use the same steps to assemble the corresponding other side; then use the same steps as above to assemble the the back seat bracket tube with E1 to E ;

Assembling the seat cover:

1. Take out the parts shown in (Fig. K), make sure that it is in the same direction as the position shown in (Fig. 9) when assembling, and install the seat cover into the toy holer with the method of (Fig. 9) step 1 (Fig. F1-F3) Then use (Fig. 9) step 2 method to install the seat cover into the seat frame tube, then use (Fig. 9) step 3 method to install the seat cover into the seat frame tube, assemble the seat cover into (Fig. 10) After the effect shown, pull the zipper (Figure K1-K10) to the position shown in (Fig 11) Part B;
   WARNING: The pulled zipper is not in the correct position as shown in (Fig. 11) part A and cannot be used! After the zipper is pulled, the position shown in (Figure 11) part B is the correct position and can be used normally! Make sure the zipper is in the correct position before it can be used normally!

2. Fasten the seat cover fixing buckle (Figure K1/K12) on the iron support tube (D1- D4) by the method shown in (Fig 12), and the fastened fixing buckle is as shown in (Fig 13);
   
   
   
   

Assembling the whole set:

Take out the parts shown in (Fig. A), make sure that the direction is the same as that shown in (Fig. 14) when assembling, install the seat on the seat holder (Fig. A1-A2), and press down slightly until you hear a click The quick release button (Fig. A1-A3) pops out, indicating that the seat has been assembled in position as shown in (Fig. 15);
Warning: After the seat is installed, check that the quick release buttons on both sides are in the same position as shown in (Fig. 15) B, which means the seat has been assembled in place and can be used normally!

Assembling the buckle/belt:

1. Use the method shown in step 1 (Fig. 16) to open the cross belt (Fig. K1-K4), and then use the method of step 2 (Fig. 16) to press button 2 (Fig. K1-K9) to open the safety buckle; Put the child in the seat in the same position as (Fig. 17), first use (Fig. 17) step 1 method to push and pull the seat belt (Fig. K1-K5) while pressing the button 1 (Fig. K1- K8) to adjust to the appropriate tightness degree, and then insert the safety buckle (Figure K1-K7) using the method shown in step 2 (Figure 17) until you hear a click;
   Warning: The safety buckle as shown in (Fig. 18) A is not in the correct position and cannot be used! The safety buckle is in the correct position as shown in (Figure 18) B and can be used normally! Please make sure that the safety buckle is in the correct position before use!

2. Finally, fasten the shoulder straps (Figure K1-K11) with the method shown in (Fig 19), and adjust the tightness of the shoulder straps in the opposite way;
   
   
   
   

Assembling the toy stand:

Take out the parts shown in (Picture G), make sure to align with the position shown in (Picture 20) when assembling, use (Picture 20) Step 1 to insert the toy stand into the toy seat (Pictures F1-F3) until you hear a click When the sound is heard, it means that the toy rack has been installed, as shown in step 2 (Fig. 20).

WARNING: The toy rack is not a handle and cannot be used as a handle! The toy shown in the picture is for illustration only, it is not consistent with the real object, the actual configuration of the toy shall prevail!

Function introduction

Toy frame adjustment function:

The height adjustment of the toy rack is shown in (Figure 21), which can be adjusted to the appropriate height in random;

Warning: There is a limit to the height adjustment of the toy rack. When it cannot be adjusted, it means that the limit has been reached. Do not adjust blindly!

Seat rotation function:

The seat can be rotated 360° to the left or right in random, and can be adjusted as shown in (Fig. 22). As shown in (Fig. 23), it is the effect diagram of 3 different directions after adjustment. In addition to these 3 types, the user can adjust the angle according to their own preferences. Adjust the position in random;

Seat adjustment function:

There are 3 levels of adjustment for the seat, which are sitting, semi- recumbent, and reclining. Use the method shown in step 1 (Fig. 24), first press the adjustment buttons (Fig. 24) As shown in step 2, rotate the seat up and down to adjust the gear position; adjust the position as shown in (Fig. 24) A for seat type, adjust to position B as shown in (Fig. 24) for semi- recumbent position, and adjust as shown in (Fig. 24) C position is lying;

Power supply instructions, this rocking chair uses two power supply methods:

1. The first one is: 5V~6V/0.8A DC power adapter for power supply, as shown in (Figure 25), insert the DC plug of the adapter into the power socket (Figure A1-A5), and then insert the AC plug into the 100- 240V 50/60Hz 0.3A AC socket;
   Warning: Do not use adapters not supplied with this product to power the product! The input voltage of the adapter is 100-240V/50/60Hz 0.3A, and the output voltage is 5- 6V/0.8A! When using the adapter, keep the adapter away from children!

2. The second is: Powered by 4pcs batteries (SIZE C), as shown in (Fig. 26), use a Phillips screwdriver to loosen the battery cover screws until the cover can be taken out, take out the cover, and use (Fig. 17) Steps 1 and 2 Insert the battery according to the positive/negative polarity of the logo, close the battery cover, and tighten the screws. Use the same steps to remove the battery;
   Warning: The screws of the battery cover must be locked, otherwise there will be liquid leakage, which will be a safety risk! Batteries must be inserted with correct polarity! Do not install it in reverse, otherwise it will not be powered on! Non-rechargeable batteries cannot be charged! Rechargeable batteries should only be charged under adult supervision! Rechargeable batteries should be removed from the product before charging! Different types of batteries and old and new batteries cannot be mixed! Exhausted batteries should be removed from the product! Dispose of used batteries immediately and keep away from children!
   
   

Control pad function introduction:

1. The power button is as shown in (Fig. 27) ①. When the power is connected, the power indicator lights up, and the button ①is used to control the switch;
   Special note: Because the circuit board has a certain memory function, when the power supply is unplugged, the stored power cannot be released immediately. At this time, plugging in the power supply may cause malfunction; if there is a malfunction, just press the power switch by 3-5time. This problem can be solved; this is a normal phenomenon, please use it with confidence!

2. The swing speed button is shown in (Fig. 27) ②, there are 5 swing gear selections (the swing from the 1st gear to the 5th gear gradually increases), and the button ② is used to select the gear;

3. The swing mode key is shown as (Fig. 27) ③, there are 7 swing modes, press ③to select the swing mode gear; the swing mode function is introduced as follows:
   
   
   
   

• The first mode is the automatic cycle mode as shown in (Fig 29): make sure the rocking chair is in the same direction as the position shown in (Fig 29), press the button ③ to the first indicator light to turn on the automatic cycle mode, and 5 different rocking modes will change one by one in every 16 seconds automatically;
• The second mode is the mode shown in (Fig. 30): make sure the rocking chair is in the same direction as the position shown in (Fig. 30), the button ③ to the second indicator light is on, and the seat rocking trajectory is shown in (Fig. 30);
• The third mode is the mode shown in (Fig 31): make sure the rocking chair is in the same direction as the position shown in (Fig 31), the button ③to the third indicator light is on, and the seat rocking trajectory is shown in (Fig 31);
• The 4th mode is the mode shown in (Fig 32): make sure the rocking chair is in the same direction as the position shown in (Fig 32), the button ③ to the fourth indicator light is on, and the seat rocking trajectory is shown in (Fig 32);
• The fifth mode is the mode shown in (Fig 33): make sure the rocking chair is in the same direction as the position shown in (Fig 33), the button ③to the fifth indicator light is on, and the seat rocking trajectory is shown in (Fig 33);
• The 6th mode is the mode shown in (Fig 34): make sure the rocking chair is in the same direction as the position shown in (Fig 34), the button ③to the 6th indicator light is on, and the seat rocking trajectory is shown in (Fig 34);
• The 7th mode is the auxiliary sleeping mode as shown in (Fig 35): the rocking chair can be oriented in any direction, the button ③to the 7th indicator light is on, it is the auxiliary sleeping mode, when the 7th indicator light is on, the swing gear button.
  
  

Automatically turn off, at this time, the auxiliary sleep mode function is activated, and the seat oscillates slightly to assist the child’s sleep;

Special note: If you want to switch to other swing modes after the auxiliary sleeping function is activated, you need to re-press (Fig 27) ②Swing gear button to re-select the swing gear!

In addition to the rocking modes presented in the above description, the user can rotate the seat direction or the base direction to realize the following five rocking modes:

• The first one, as shown in (Fig. 36), is based on the swing mode (Fig. 30), which is achieved when the base is turned to the same direction as the position shown in (Fig. 36);
• The second type, as shown in (Fig. 37), is based on the swing pattern shown in (Fig. 31), which is achieved when the base is turned to the same direction as the position shown in (Fig. 37);
• The third type, as shown in (Fig. 38), is the swing mode based on the swing mode of (Fig. 32) when the base is turned to the same direction as the position shown in (Fig. 38);
• The fourth, as shown in (Fig. 39), is the swing mode based on the swing mode of (Fig. 33) when the base is turned to the same direction as the position shown in (Fig. 39);
• The fifth, as shown in (Fig. 40), is based on the swing mode of (Fig. 34), which is achieved when the base is turned to the same direction as the position shown in (Fig. 40);

Since the seat can be rotated 360°, in addition to the rocking modes described above, users can also rotate the seat or base to achieve more different rocking modes!

Special note: When the swing mode key is shifted, it normally takes about 5 seconds to switch gears (the next gear can be switched again after the gear to be switched is successful). If you don’t wait for about 5 seconds to switch the button, you may not be able to shift gears. This is a normal phenomenon, please use it with confidence!
Special Note: The rocking track shapes described above are for clarity of use! In actual use, since the seat can be rotated 360°, the shape of the rocking trajectory may be different from the description in this manual, which is a normal phenomenon, please use it with confidence!

The movement motion control button is shown in (Fig. 27) ④. The button ④can open and close the movement motion control link. After the baby falls asleep, the motion control mode function is turned on. For example, when the baby wakes up and shakes the body or seat to trigger the motion control, it will Automatically trigger the swing gear and the music function to start;

The music button is as shown in (Fig. 27) ⑤, the rocking chair comes with 12 chord music, press the first time to play the music, press the second time to turn off the music, press the third time to enter the next music, and so on. For music switching, Keep pressing the music button when the music is playing to freely adjust the volume, and release it when the volume is adjusted to a suitable volume;

The remote control function is shown in (Fig. 27) ⑥as a remote control receiver, equipped with an infrared remote control, the control range is about 8 meters, and it is more convenient to remotely control the rocking chair function.

Remote control function introduction

As shown in (Figure 28) is the reverse side of the remote control, use a screwdriver to unscrew the screws of the remote control, open the battery box according to the steps and methods shown in (A and B in Figure 28-1), and then put the CR2025 coin cell battery Put it into the battery box as shown in (C in Figure 28-1), and then put the battery box into the remote control as shown in (A in Figure 28-2) until you hear a click as shown in (Figure 28 B) in -2 indicates that it has been assembled in place, and finally tighten the screws as shown in (Fig. 28-3).

Warning: Batteries must be inserted with correct polarity! Do not install it in reverse, otherwise it will not be powered on! Can’t use remote control!

Before using the remote control, you need to pull out the power-off plastic sheet (①in Figure 28-4) as shown in (Figure 28-5) to turn on the power of the remote control, so that the remote control can be used normally; if the remote control is not used , please insert the power-off plastic sheet as shown in (Figure 28-6) to disconnect the power of the remote control, so that the power of the remote control can be used for a longer time.

Warning: When using the remote control, you must pull out the power-off plastic sheet (①in Figure 28-4) and turn on the power of the remote control, otherwise the remote control cannot be used!

This product contains a coin cell battery that can cause severe internal chemical burns if

swallowed!

Exhausted batteries should be removed from the product! Dispose of used batteries immediately and keep away from children!

1. The main power switch key is shown as (②in Figure 28-4): press it once, and the power indicator light turns on or off.

2. The music switch key is shown as (③in Figure 28-4): press it once, the music will sound on or off.

3. The next music key is shown as (④in Figure 28-4): each time it is pressed, the music will play to the next song.

4. The previous music key is shown as (⑤in Figure 28-4): each time it is pressed, the music will play to the previous one.

5. The volume key (+) is shown as (⑥ in Figure 28-4): each press can gradually increase the volume to the maximum volume set by the rocking chair.

6. The volume key (-) is shown as (⑦ in Figure 28-4): Each press can gradually decrease the volume to the minimum volume set by the rocking chair.

7. The swing gear key is shown as (⑧in Figure 28-4): every time it is pressed, the swing gear is increased by 1 gear, and then pressed to 5 gears (maximum gear), and then the gears can be changed cyclically.

8. The rocking mode key is shown as (⑨in Figure 28-4): each time it is pressed, a mode is switched, and the mode can be changed cyclically.
   Special note: When the swing mode key is shifted, it normally takes about 5 seconds to switch gears (the next gear can be switched again after the gear to be switched is successful). Shifting situation, this is a normal phenomenon, please use it with confidence!
   Special note: When the button is pressed until the seventh indicator light is on, the auxiliary sleep function is activated. If you need to switch other swing modes, you need to press the ⑧swing gear button again to re-select the swing gear!
   Warning: After each gear is selected, it needs to wait for about 10 seconds before it can swing normally. During this period, push-pull method cannot be used to assist the swing. Otherwise, it needs to wait for another 10 seconds before it can swing normally. This is a normal situation, please safe to use!

9. The motion control key is shown as (⑩in Figure 28-4): press it once, and the motion control indicator light turns on or off.

Introduction to the method and function of inserting the battery into the vibration box:

1. Use the method shown in (Fig. 41) step 1, first pull the seat belt open, then use the (Fig. 41) step 2 method to open the seat cloth, and then use the step shown in (Fig. 42) to use a Phillips screwdriver to remove the battery cover. Unscrew the screw until the cover can be taken out, take out the cover, insert one AA battery according to the positive/negative polarity direction of the logo, then close the cover, and tighten the screw, and use the same steps to remove the battery;
   Warning: The screws of the battery cover must be locked, otherwise there will be liquid leakage, which will be a safety risk!
   Batteries must be inserted with correct polarity! Do not install it in reverse, otherwise it will not be powered on!

2. The function of the vibration box is shown in Figure 42. The vibration box is divided into three gears. Press the toggle switch to gradually increase the vibration amplitude from left to right, and toggle to the far left to turn off the power.
   
   

Function introduction of electric rocking chair into manual rocking chair:

1. Use the method shown in step 1 (Fig. 43), press the button in, and the seat will automatically pop up as shown in step 2 (Fig. 43). When the seat is up, the seat can be taken out as shown in the step (Fig. 43). 3 shown;
2. As shown in (Fig. 44), manually rock the seat up and down;
3. As shown in (Fig. 45), prop up the support feet to make the rocking chair stable.
   Warning: When the child is in the seat, do not take out the seat to avoid safety accidents!
   

MAINTENANCE-CLEANING

MAINTENANCE: This product requires regular maintenance to keep it in good working order. Regularly check all parts of the product to ensure that they are operating correctly and for signs of wear or damage. Only replacement parts supplied or recommended by the manufacturer should be used.

CLEANING: Refer to care label on the product for cleaning instructions for fabrics. Clean metal or plastic components with mild detergent and warm water. Never use abrasive, ammonia based, bleach based or spirit type cleaners. Ensure the product is fully dry before use or storage.

CUSTOMERS SUPPORT

FOLLOW US

bebestarsbygilis
@bebe.stars
bebestarsbygilis
63200 | Nea Moudania | Greece

References

• Παιδικά Προϊόντα & Βρεφικά Είδη στη Χαλκιδική - Bebe Stars

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>