Majority Atlas Computer Soundbar User Manual

: June 12, 2024
: MAJORITY

Majority Atlas Computer Soundbar

USER MANUAL

Box Contents

A. Majority Atlas Speaker
B. USB to Micro USB Cable
C. 3.5mm to 3.5mm AUX Cable

Box Contents

Controls and Functions

Top View

Top View

Play/Pause
Previous/Rewind
Indicator light
Next/Fast-Forward
Mode

Front View

Front View

On/Off/Volume Dial

Back View

Back View

SD Card Slot
USB DC Power Port
USB Port
AUX Input

Instructions Guide

Setting up your Majority Atlas

Please note all (Ref.) refer to the Controls and Functions in the above diagrams.

Connecting and Powering the Unit

Using the USB to Mini USB power cord provided, plug the mini USB connector into the back of the unit (Ref.8) and plug the other end into a USB power supply (mains adaptor or other USB power supply).

Rechargeable Battery

When the unit is not fully charged, the indicator light (Ref.3) will display as red. When the unit has reached full power, the red light will disappear.

Switch on your Majority Atlas Soundbar

Switch the unit on by rotating the On/Off/Volume dial clockwise until the dial clicks into place and the soundbar is powered on (Ref.6). To switch the unit off, rotate the dial (Ref.6) anti-clockwise until the dial will not rotate any further.

Basic Operations

Use the On/Off/Volume dial (Ref.6) to switch the unit on or off and change the volume.

In Bluetooth, SD, or USB mode, use the ‘Play/Pause’ button to play or pause a track, and use the ‘Previous’ and ‘Next’ (Ref.2)/(Ref.4) buttons to skip tracks or fast forward/rewind (press and hold to rewind or fast forward).

Press the ‘MODE’ button (Ref.5) to change modes between SD card, Bluetooth, AUX and USB mode.

Bluetooth Mode

To connect an external device to the Atlas soundbar, ensure that the soundbar is in ‘Bluetooth’ mode. Select ‘Bluetooth’ mode by pressing the ‘MODE’ button (Ref.5).

The soundbar will sound with the phrase ‘Bluetooth’ to indicate that Bluetooth mode is now active.

The soundbar indicator light (Ref.3) will flash until successfully connected to a Bluetooth device.

Switch Bluetooth on for your external device. Select ‘Majority Atlas’ from the list of devices.

When connected, the indicator light (Ref.3) will remain static blue.

When your external device is connected, the soundbar will sound with the phrase ‘Bluetooth Connected’ to indicate successful connection. You can now play audio through the speakers. When disconnected, the soundbar will sound with the phrase ‘Bluetooth Disconnected’.

If the unit is switched to a different mode while Bluetooth is connected, Bluetooth will automatically be disconnected.

USB & SD Card Mode

When a USB or SD card is inserted, the unit will automatically switch to the correct mode and begin playing audio. If necessary, select ‘USB’ or ‘SD’ mode using the ‘MODE’ button (Ref.5).

USB

Insert a USB drive into the USB port at the back of the unit (Ref.9). When USB mode is selected, the soundbar will sound with the phrase ‘USB’.

Maximum compatible storage: 64GB.

Micro SD card

Insert a micro SD card into the ‘SD’ port at the back of the unit (Ref.7). When SD card mode is selected, the soundbar will sound with the phrase ‘Memory Card’.

Maximum compatible storage: 64GB.

AUX Mode

Use the included 3.5mm to 3.5mm AUX cable to connect an external device to the ‘AUX’ input of the Majority Atlas (Ref.10).

When an AUX cable is plugged in to the AUX port at the rear of the speaker (Ref.10) , the unit will automatically switch to AUX mode (indicated with the phrase ‘Line in’). If necessary, select ‘AUX’ mode using the ‘Mode’ button (Ref.5).

Warranty

Register your Majority product within 30 days of purchase to activate your extended 3 Year Warranty. Gain access to all the benefits and lifetime technical support (see our Extended Warranty details for more info).

Specifications

Model No.	ATLAS-SPEAKER-BLK
Dimensions	45 x 6 x 5 cm
Power	DC 5V
Weight	0.80 kg
Speakers	Stereo
AUX	3.5 mm
Battery	1900mA Lithium

Safety Info

IMPORTANT

Please read all instructions carefully before use.

WARNING

Risk of electric shock. Do not open.

Read these instructions:
Heed all warnings.
Follow all instructions in the user manual.
Do no clean the apparatus near or with water.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during light storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped.
No naked flame sources, such as lit candles, should be placed on the apparatus.
Dispose of used electrical products and batteries safely according to your local authority and regulations.

Addition Warnings

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus.

Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main power completely, the power plug should be disconnected from the main socket outlet completely.

Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Recycling Electrical Products

You should now recycle your waste electrical goods and in doing so help the environment. This symbol means an electrical product should not be disposed of with normal household waste. Please ensure it is taken to a suitable facility for disposal when finished with.

Troubleshooting

If you are having issues with your product or require further assistance, please visit our Frequently Asked Questions (FAQs) page below.

FAQS

Here are some answers to frequently asked questions about the Majority Atlas soundbar:

How long will the battery last?
The battery of the Atlas provides 8+ hours of play time from a full charge.

Does the Atlas have a microphone?
No, unfortunately the Atlas does not have a microphone.

Can I plug in headphones?
Unfortunately, the Atlas won’t work with wired headphones.

Will the Atlas work with my Smartphone?
Yes, the Atlas soundbar is perfect to use with your Smartphone. Simply connect via Bluetooth and play audio from any App.

What else can I connect to the Atlas?
Of course, you can connect the Atlas to your laptop or computer via AUX or Bluetooth. But the Atlas can play audio many other ways too. Do you have any old MP3 players or CD players lying around? Simply connect them via the 3.5mm audio jack and start making some noise. Anything with Bluetooth (other than headphones or speakers) will also connect to the Atlas perfectly. Got any old USB sticks or Micro SD cards with tracks on them? The Atlas will read audio from these too!

Can I connect my Xbox or Playstation?
Yep – the Atlas is great for gaming. Simply connect via a 3.5mm audio cable, included in the box, and you are good to go.

Can I plug it into my TV?
If your TV has a 3.5mm port, then yes – you can connect it to your TV! However, you may find that the volume and sound may not be sufficient for TV audio. The Atlas is much better suited to the uses mentioned above.

What are the soundbar dimensions?
The Atlas measures 45 x 6 x 5cm.

How many songs on USB/micro SD can the Atlas handle?
The Atlas can read devices up to 64GB.

What file types are compatible via USB/micro SD?
The Atlas is compatible with the following file types: MP3, WMA, FLAC, WAV, and APE.

Is the Atlas compatible with Universal remotes or Fire Stick remotes?
Please try using the following infrared (IR) code: 01FE