Dosmix TWS Wireless Portable Mini Bluetooth Speakers with 5W Big Sound User Manual
- June 4, 2024
- Dosmix
Table of Contents
Dosmix TWS Wireless Portable Mini Bluetooth Speakers with 5W Big Sound
Specifications
- CONNECTIVITY TECHNOLOGY: Bluetooth, Auxiliary, USB, NFC
- SPEAKER TYPE: Subwoofer
- BRAND: Dosmix
- MODEL NAME: Portable
- RECOMMENDED USES FOR PRODUCT: For Televisions, For Computers, For Smartphones or Tablets
- POWER OUTPUT: 5W
- ITEM WEIGHT: 1.98 ounces
- RESPONSE FREQUENCY: 60Hz-18KHz
- IMPEDANCE: 4ohm
- DISTORTION: <1%
- SNR: 65db
- PRODUCT: Dia 1.9” * H 1.3” /120g
- COMPATIBILITY: iPhone, iPad, laptops, Android phones, Apple phones, tablets, laptops, Echo Dot
- BATTERY CAPACITY: 300mAh
- DIAMETER: 2.6 inches
- PLYTIME: 2 hours
- BLUETOOTH VERSION: 2.1
Introduction
It has Stunning audio with full, high-definition sound. Enjoy remarkably rich sounds and powerful bass produced by a passive audio subwoofer and a 5W audio driver. Use two Dosmix M3 devices connected quickly to double your audio experience. Additionally, for something so little, It has astonishing endurance. When compared to portable speakers of comparable size, an ultra- high density battery allows for up to twice as much playback time at 80 percent volume over 2 hours of continuous use. and uses the supplied Micro USB cord to charge in just 1.5 hours.
This speaker, which is roughly the size of a ring box, can fit into almost any pocket or bag, including the little side pocket of your backpack or the jacket pocket. It is 1.9″D x 1.3″H in size and 120g in weight. You can Connect any NFC or Bluetooth-enabled device (version 2.1 and higher) with an iPhone, iPad, laptop, Android phone, Apple phone, tablet, laptop, Echo Dot, or another device to start listening to music. We will do WHATEVER it takes to make sure you are completely delighted with your purchase if you don’t have a pleasant experience for ANY reason.
HOW TWS WORKS
- Turn both Bluetooth speakers on in Step 1.
- STEP 2: For three seconds, press and hold any one of the two speaker power buttons. You will hear a matched tone as the two speakers are paired (LED Light: flashing blue turns solid)
- Step three is to ensure that you are linked with and connected to ONE of the two aeroplane speakers by opening the Bluetooth settings on your device (Model:M3). Now, sound ought to emanate from both speakers.
NOTE: Pause the music for 5 seconds, then press play again if you experience any dropouts or don’t hear the music from both speakers. Alternately, try the pairing procedure again. When one is off, both are also off.
HOW TO USE
Press the “Power On” button on each speaker repeatedly until you hear the confirmation, “Power on, your speaker is ready to pair.” Any of the speakers’ “Mode” buttons should be long-pressed until you hear “Connected successfully.” The TWS mode of your speakers is currently established.
HOW TO PAIR 2 BLUETOOTH SPEAKERS
- Place two speakers close to one another, then turn them both on by pressing button simultaneously.
- Wait for 2-4 seconds to let them pair after pressing and holding the button on one of the Bluetooth speakers for a long time till there is another tone.
HOW TO PLAY MUSIC
Turn on Bluetooth on your Samsung Galaxy smartphone in step 1. Step 2: From the Bluetooth Settings menu, pair the two Bluetooth wireless earphones. Even when two headsets are connected, your music will initially only play on one of them.
HOW TO CHARGE
Connect the charging case to an approved wall charger or USB power source. The charging case and earbuds take around two hours to fully charge. Note: Charge times may be greater with uncertified chargers.
HOW TO CHECK BLUETOOTH VERSION
- Turn the device’s Bluetooth on.
- Click on Phone Settings now.
- Select the “ALL” tab by tapping on App.
- Tap the Bluetooth icon labeled Bluetooth Share after scrolling down.
- Done! You can view the version in the App Info section.
Frequently Asked Questions
Why won’t my TWS pair?
• Remove the instructions for pairing the left and right earbuds (Reset the
i12 TWS). 5 Press the power button while in pairing mode until the LED turns
red.
• To activate the TWS, long press the function key for 5 seconds.
• Start pairing; the pairing process takes roughly 5 seconds; “pairing mode”
prompt tone.
How do I simultaneously connect two Bluetooth speakers?
Android users must go to Bluetooth Settings and pair each Bluetooth speaker or set of headphones individually. After connecting, click on Advanced Settings by tapping the three-dot icon on the right. If the “dual audio” option is not already selected, switch it on. Users should be able to connect to two devices at once thanks to this.
Can two Bluetooth speakers be linked together?
You might be able to connect to two Bluetooth speakers at once, depending on the hardware you have. Newer technology has Bluetooth 5, which enables simultaneous pairing with two devices. Similar solutions have been developed by other device manufacturers.
How can I determine when my Bluetooth has finished charging?
It often has a red charging indicator light. The battery is fully charged when the light goes off, indicating. You must learn how to charge a Bluetooth headset properly, that is, just when the battery is running low, if you want to get the most life out of it.
Can I use a mobile charger to charge TWS?
Yes, you may charge your Bluetooth headphones with a mobile charger. The USB cables will meet your charging needs and are constructed in accordance with the USB standard.
Why can’t Bluetooth connect to several devices at once?
Up to eight separate devices can be registered (paired) with the headphones, however only one device can transmit or receive at once. Because of this, “Multipoint” connections are not supported.
Why isn’t music playing on my Bluetooth device?
Make sure the volume is turned up on your phone, the car, and any accessories. Verify that the music isn’t being played by other devices that are associated with your phone. Verify the media audio is activated: Open the Settings app on your phone.
A Bluetooth device can connect to how many other devices at once?
Cell phones, keyboards, headsets, and mice are examples of personal area network (PAN) devices that employ the short range wireless technology known as Bluetooth. Using this 2.4 GHz technology, a Bluetooth device can connect to a maximum of seven additional devices.
The TWS button is what?
You may enjoy full stereo sound quality without the necessity of cables or wires thanks to a special Bluetooth function known as True Wireless Stereo (TWS). This is how TWS operates: You connect your favourite Bluetooth music source to a primary Bluetooth speaker.
TWS is it harmful?
Increased risk of developing cancer, cellular stress, an increase in dangerous free radicals, genetic damage, structural and functional changes to the reproductive system, deficits in learning and memory, neurological disorders, and detrimental effects on people’s overall wellbeing are some of the effects.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>