iHome 2IHQI2063 3 In 1 15W Magnetic Wireless Charging Stand User Manual

iHome 2IHQI2063 3 In 1 15W Magnetic Wireless Charging Stand

• Product name： 3-in-1 15W Magnetic Wireless Charging Stand
• Product model： 2IHQI2063

Package Contents

1.  3 in 1 wireless charger
2.  User Manual
3.  USB to USB-C charging cable

Features of Product

1. 3 in 1 Wireless Charger: 5W/7.5W/10W/15W Wireless charger for Qi-enabled phones Wireless charger for Earphone Wireless charger for iWatch.
2. Compact Design: Simple and strong, easy to use and carry.
3. Suitable for Use: Travel, home, hotel, office, restaurant, bar, etc.

Specifications

Wireless Output for Smart

Watch

| 3W Max.
Material| ABS+PC
USB Cable| Type-C to USB-A
Product Size| L123.5W75H141.5mm

Product Diagram

1. Wireless Charger for Phone
2. Wireless Charger for earphone
3. Wireless Charger for Smart Watch
4. Power Indicator
5. Cooling Hole
6. Type-C Input port

How to Use

1. Connect this charger to PD/Quick charge 3.0 by USB cable
   Attention: The input must be 9V/2A or 12/2A Charger.

2. Charge your devices.

3. Plug in the charging cable

4. Connect the Quick charge 3.0

5. Charge your phone

6. Charge your earphone

7. Charge your Smart Watch

Indicator Status

1. Power on: 3 lights (White, Blue, Green) are on at the same time, then the lights go out after 3 seconds and enter standby mode.
2. Standby: 3 lights (White, Blue, Green) are off.
3. Charging your phone: The green light is on, and goes out after 20 seconds.
4. Charging your Apple Watch: The white light is on, and goes out after 20 seconds.
5. Charging your earphone: The blue light is on, and goes out after 20 seconds.
6. Full Charge: The indicators do not prompt when the devices are full charged.

Safety Tips

Please adhere to these basic precautions while using this product as follows:

1. Read all the instructions before use.
2. This product can be normal used between the temperatures of 32°F(0°C) to 95F(35C).
3. Do not expose the device to fire or excessive temperature. Exposure to fire or excessive temperatures may cause an explosion.
4. Do not expose the device to moisture.
5. Keep away from water or other liquids which may lead to short circuit while using the product.
6. Close supervision is necessary when the product is used near children.
7. Do not use this wireless charger if damaged or modified.
8. Do not disassemble the device. Incorrect reassembly may result in risk of fire or injury.
9. Ensure that qualified service professionals use only identical replacement parts to ensure product safety.
10. Accessories placed on the back of your smart phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove accessories from the phone before attempting wireless charging
11. Remove your phone /watch /earphone when it is fully charged. Please unplug the power adapter when your devices are fully charged.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>