DEKO LIGHT 731098 Ground Wall Ceiling Lamp Instruction Manual
- June 12, 2024
- DEKO LIGHT
Table of Contents
DEKO LIGHT 731098 Ground Wall Ceiling Lamp
Product Information
- Product Name: Ground- / Wall- / Ceiling lamp, Keid
- Article Number: 731098
- Description: This product is a multi-purpose lamp that can be used on the ground, wall, or ceiling. It is designed for outdoor use and fulfills the requirements of effective European and national guidelines.
Product Usage Instructions
Proper Use
This product is intended for lighting purposes only and should only be operated on normal or non-flammable surfaces. Ensure that the surface is suitable for supporting the weight of the lamp.
Care
Repairs should only be carried out by a qualified electrician. Before cleaning or maintenance, disconnect the lamp from the mains and allow it to cool down. Use a dry or slightly moistened cloth for cleaning. Do not use chemicals, flammable cleaning agents, or abrasives as they may damage the surface coating and insulators.
Faulty Function
If the lamp is not functioning properly, check the following:
- Is the light switched on at the switch?
- Is the transformer mounted and connected properly?
- If available, is the remote control intact? Check the batteries.
- Are the connected lines in good condition?
- Is the lamp defective?
Changing Lamps
The light source of this lamp is not replaceable. When the light source reaches its end of life, the entire lamp needs to be replaced.
Storage and Disposal
Used electronic devices should be brought back to public collection points for disposal and should not be treated as household waste. Store the lamp in a dry and clean environment and avoid putting mechanical strain on it during storage.
Dear customer,
- thank you for deciding to purchase our product. The product fulfils the requirements of effective European and national guidelines.
- To maintain the condition of the product and to ensure safe operation, you – as the user – must observe the product notes and the operation manual!
- They contain important information for the start-up and handling.
- It is important, therefore, that these documents are archived carefully for referring to information at a later stage.
Safety Instructions
- We are not responsible for any property damage or personal injury caused by failure to observe these product notes and manual, improper handling or unauthorised modifications.
- It can only be installed by a qualified electrician.
- Make sure that the item has not been damaged during transport before putting the light into operation. It may not be operated if there are any damages to electrical parts.
- The luminaire may only be operated completely with its protective cover.
- It may only be operated once removed from the packaging.
- The type plate must not be removed.
- The connection lines in the building must be disconnected before installation and secured against being switched back on.
- Make sure the electrical specifications for the connection lines correspond with the specifications given on the nameplate of this product.
- We recommend that you protect the product with a residual-current-operated protective device. Follow all installation regulations applicable at your location.
- Make sure that the cables and plugs are not subject to tension or torsional forces and do not bend the cables.
- Protect all cables and insulation against possible damages.
- Output lines should be laid separately and spaced apart from other lines. The power supply cables and the lamp feeders must not cross each other.
- Do not allow the product to come into contact with extreme heat or naked flames.
- Use the supplied fastening material only when it is suited for the installation background.
- The product must not be covered with objects (decorations) or thermally insulating coverings /similar materials.
- Before disposal of the packaging material make sure that all components are removed.
- Keep packaging material away from the reach of children and pets. The packaging contains small parts that may be swallowed by children.
Proper Use
- This product is only intended for lighting purposes and may only be operated on normal or non-flammable surfaces.
- The luminaire is designed for outdoor use.
- Make sure that the surface is suitable for permanently and reliably taking the weight of the light.
Care
- Repairs may only be carried out by a qualified electrician.
- Disconnect the entire product from the mains first and allow it to cool down before cleaning or maintaining.
- Use a dry or slightly moistened cloth for cleaning.
- Never use any chemicals, flammable cleaning agents or abrasives. These may cause damage to the surface coating and/or the insulators.
Faulty Function
- Light switched on at the switch?
- Transformer mounted and connected properly?
- If available; remote control intact? Check the batteries.
- Check the connected lines.
- Lamp defective?
Changing Lamps
- The light source of this lamp is not replaceable. When the light source has reached its end of life, replace the entire luminaire.
Storage and Disposal
- Used electronic devices must be brought back to public collection points and must not be disposed of as household waste.
- Storage in a dry and clean environment. Do not strain the product mechanically during storage.
- Deko-Light Elektronik-Vertriebs GmbH
- www.deko-light.com
- deko@deko-light.com
- Technical Data can be changed without advance notice. Errors excepted.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>